Это видео недоступно.
Сожалеем об этом.

KEMI MOTO CLUB CAR PRECEDENT DELUXE LIGHT KIT REVIEW & INSTALLATION

Поделиться
HTML-код
  • Опубликовано: 11 апр 2024
  • KEMI MOTO Deluxe Club Car Precedent light kit review and installation. The viewer will experience the unboxing, review and installation of a Kemi Moto Deluxe Club Car Precedent light kit. I'll be showing the process from start to finish. This item was sent to me for free from Kemi Moto in exchange for an installation video. In this video, I provide my honest review being overall satisfied with the product. KEMI MOTO has no influence on my overall opinion about this product. Note: I attached the fuse block with command strips and added extra length to the wire to easily remove block for easy access, if placed in a tight spot. Below you'll find affiliate links for the same or similar items used in this video. Thanks for watching!!
    KEMIMOTO Deluxe Precedent Light Kit Compatible with Club Car Precedent 2004-Up. amzn.to/49uGVNk
    DC to DC Voltage Reducer. amzn.to/3TQeV0B
    DaierTek 12V Fuse Block. amzn.to/3PXbOmF
    GS Power 14 AWG (True American Wire Gauge) CCA Copper Clad Aluminum Primary Wire 25 ft Red & 25 ft Black. amzn.to/3UadMm1
    TICONN 250Pcs Heat Shrink Wire Connectors. amzn.to/43WkKyq
    Heat Gun. (For heat shrink) amzn.to/4cR2kmr
    Command Black Picture Hanging Strip Mixed Pack. (For mounting voltage reducer and fuse block instead of using screws.) amzn.to/3xEDwhp
    PORTER-CABLE 20V MAX Impact Driver. amzn.to/49yeQ7N
    Amazon Basics 42-Piece Impact Screwdriver Bit Set. amzn.to/4aLMR5x
    22 Pieces Hex Shank Drill Bit Set for Impact Driver. amzn.to/3UbFxdW
    Bi-Metal Hole Saw Kit, 7-Piece. amzn.to/49uhefF
    WD-40. amzn.to/43SLFuK
    MCR Safety glasses. amzn.to/3VY8Ylb
    Pharma-C 70% Isopropyl Alcohol Wipes. (For cleaning surfaces prior to installing taillights or command strips.) amzn.to/3VNYkNJ

Комментарии • 9

  • @johnnyp5573
    @johnnyp5573 9 часов назад

    I watched this video and ordered the kit. Went together fine but the horn wouldn’t work. Tried the adjustment the instructions said and it still wont work

  • @kevinpaiva1358
    @kevinpaiva1358 8 дней назад +1

    Hi there and thanks for the info! Ps what was that grey wire that plugs into the factory harness for? Thank you!

    • @peteshowtosreviews8067
      @peteshowtosreviews8067  5 дней назад

      Hi! I apologize for the delayed response. The grey wire goes to the cart harness. If that isn't plugged in, the lights will not work properly, or at all. Hope this answers your question. Thanks for watching!

    • @kevinpaiva1358
      @kevinpaiva1358 4 дня назад +1

      Sounds good and thanks for your time and the video

    • @peteshowtosreviews8067
      @peteshowtosreviews8067  4 дня назад

      @@kevinpaiva1358 Thanks again for watching!

  • @Freelancersupravat
    @Freelancersupravat 4 месяца назад +1

    Great!

    • @peteshowtosreviews8067
      @peteshowtosreviews8067  4 месяца назад

      Thanks!!

    • @georgecruso8416
      @georgecruso8416 2 месяца назад +1

      Everything was good for running the wires to where they go. After that, the instructions on where and how to hook the wires up to the cart are terrible. The excuse was that he ran low on his battery. He didn’t show anything about where to hook the kit wires into the cart wires under the dash.

    • @peteshowtosreviews8067
      @peteshowtosreviews8067  2 месяца назад

      @@georgecruso8416 Hi, I did show where the kit wires are connected to the cart under the dash. I didn't show the process due to my "excuse". If you need assistance feel free to email me at peteshowtosreviews@gmail.com I'll be willing to walk you through that step over the phone or in an email since it isn't clear in the video. Thanks for watching!!