Thank you! I have a swollen touchpad on my laptop, and have been using a USB mouse & keyboard. After a computer update, my mouse and keyboard would not work. Uninstalling my USB did the trick. Now, both work! Great, helpful video.
i come to your videos not to learn about computer,but to improve my english listening skill lmao .. you have a great and clear accent-and great microphone also- so thx for your tips and tricks and for your voice :D ♥
Doesn't work for me. Ever since I installed new SSD and Windows 10 LTSC 21H2 I started having this issue with my Mars Gaming MM5 once every 1-3 weeks at startup. My mouse cursor will only move up and down at the left and top side of my screen. I have to unplug USB port and replug it and then it gets fixed again. Or if I restart the PC. Didn't have this problem when I was on the old Windows 10 1903 version and old non SSD hard drive. However, keyboard and gamepad controllers seem to work fine. I have tried uninstalling, reinstalling driver and also "allow this computer to turn off this device to save power" for the mouse but it makes no difference. Been using this mouse for 7 years and never had these problems until 2 months ago when I installed LTSC 21H2. I don't know if the mouse is the fault or Windows 10 LTSC. Once it works, it never causes any other problems.
My issue is when i hold left click to aim in games sometimes it aims out even if i was holding and it does the same for left click sometimes can you help?
so uhhh i got to the last step , it wasnt working than when i tryied it again it somehow worked.Did it got scared when it hear that it will get replaced?
Thanks so much, I could figure it out after seeing this video. Just by going to the Device Manager there was a warning on the multi-port host controller, just uninstalled it and reset the laptop make it work again.
My keyboard works great with all usb ports on the computer but of the 3 mice that I tried they all had random issues in fairly consistent intervals, I've tried all driver updates changes ect
all my port is working cable and flash , but my laptop can't recognize the mouse cable, Before I formatted it, it was working, but after formatting the computer, the mouse did not work, even though it was new.
Try another port worked for me. Windows 10 setup my mouse and I used the Logitech app to adjust scrolling and pointer speeds. Thank you for the tip! - Paul
If I use left side USB then my mouse do not work, if I change to use another USB then my mouse work properly. How can I solve my left side USB.? My USB is ok because if I use it without mouse then its work like extra keyboard also conncet & also connect pendrive but when I connect mouse on this USB its doesn’t work. Please give me solution how can solve this
For me the dpi and the scroll doesnt work and i cant fix it the mouse is good when i was updateing some software for changeing dpi and other stuff the mouse fucked up
My port works. I tried plugging different things into it and it works fine. I tried plugging the mouse into other ports and it doesn't work except for the ones at the back. Both the mouse and the ports work but that port in particular doesn't let me use my mouse.
Mouse lazer is off The windows say the device ia malufunctioning the mouse work perfectly on the smart tv ... And i can't fine mice an other pointing devices in device manager
Didn't even have to update the driver. Uninstalled, restarted the pc and it started working again. Humanity's greatest invention really does come down to turning on and off lmao.
Had raw accel installed. Downloaded Custom Curve Lite. It corrupted. I uninstalled both. Fixed then broke on restart. Reinstalled raw accel. Fixed. Uninstalled raw accel. Restarted. Fixed.
Just wanted to let you know u fucked up my computer even worse me following ur steps. I uninstalled USB controller and now my keyboard doesn't work smh.
mouse always works in window 10 because windows 10 is svga. yes it is. windows was always dos in a skirt and windows 10/11/12/13... is still dos in a skirt. dos programmers, like myself, had to compensate for the mouse driver in text mode. by this i mean the default mouse driver x/ys was always and is always assumed to be 640x480 and the x/ys are reported based on that. there is no such thing as 0,0 or 1,1 in text mode. the mouse driver sez no, man. we can't have that. it doesn't work. it's no good. You have to make up the difference with a prepossesser directive or inject hardcode every time the mouse function is called. #define FIXx x = x / 8 + 1 #define FIXy y = y / 8 + 1 You will forget to do this sometimes. your program will shit down your throat. debugging will make you see the light. it takes a while. why wasn't this thought of based on video modes long ago and stuck in a library?
I'm really grateful I watched your video I am truly thankful you really saved my life turned out I plugged it in the wrong one LOL anyways go subscribe yall
Thank you! I have a swollen touchpad on my laptop, and have been using a USB mouse & keyboard. After a computer update, my mouse and keyboard would not work. Uninstalling my USB did the trick. Now, both work! Great, helpful video.
I also need to try.
i come to your videos not to learn about computer,but to improve my english listening skill lmao .. you have a great and clear accent-and great microphone also- so thx
for your tips and tricks and for your voice :D ♥
Glad to hear that!
mice and pointing options isnt even on device manager for me
Same
Only 140 likes!?! Dude is a genius🖐🏽, thank you I been trying to work on this for hours here it is 1:00 am. System restore def worked for me.❤️
Thanks!!!!!!!it works when I uninstalled USB root hub
Thx. Those methods are simple and easy. Thank you so much it's fixed!
Doesn't work for me. Ever since I installed new SSD and Windows 10 LTSC 21H2 I started having this issue with my Mars Gaming MM5 once every 1-3 weeks at startup. My mouse cursor will only move up and down at the left and top side of my screen. I have to unplug USB port and replug it and then it gets fixed again. Or if I restart the PC. Didn't have this problem when I was on the old Windows 10 1903 version and old non SSD hard drive. However, keyboard and gamepad controllers seem to work fine.
I have tried uninstalling, reinstalling driver and also "allow this computer to turn off this device to save power" for the mouse but it makes no difference. Been using this mouse for 7 years and never had these problems until 2 months ago when I installed LTSC 21H2. I don't know if the mouse is the fault or Windows 10 LTSC. Once it works, it never causes any other problems.
My issue is when i hold left click to aim in games sometimes it aims out even if i was holding and it does the same for left click sometimes can you help?
The mouse button seems faulty. You have to change your mouse.
My mouse stops working, or works with a delay only in games. Everything started to happen after switching to windows 11. Can I fix it somehow?
Thank you so much 👍
Very good advice!
so uhhh i got to the last step , it wasnt working than when i tryied it again it somehow worked.Did it got scared when it hear that it will get replaced?
Thanks so much, I could figure it out after seeing this video. Just by going to the Device Manager there was a warning on the multi-port host controller, just uninstalled it and reset the laptop make it work again.
When i deleted that one thing one device manger my keyboard does work anymore how do i fix
I tried all of these and none of them worked, dang
same bro
Same
OMG TYSM IT WORKED When i deleted the USB host controller and root hub
My keyboard works great with all usb ports on the computer but of the 3 mice that I tried they all had random issues in fairly consistent intervals, I've tried all driver updates changes ect
When i plug my mouse in laptop in device manager its not showing
all my port is working cable and flash ,
but my laptop can't recognize the mouse cable,
Before I formatted it, it was working, but after formatting the computer, the mouse did not work, even though it was new.
U helped bro on 1sst fix I reconnected tysmmmm I had the problem for the whole day
Love you 😘 bro finally after 5 to 6 months this is not solve then finally today solve
Try another port worked for me. Windows 10 setup my mouse and I used the Logitech app to adjust scrolling and pointer speeds. Thank you for the tip! - Paul
It works, thanks❤️❤️
I have tried but all of those doesn't work mine keyboard one which is working also gone 😢
The right and left tabs on my mouse works but the light won’t turn on and I can’t move the mouse can you help please …
can you help me i right clicked window logo and clicked device manager and the bluetooth is not showing can you help me fix it ??
thanks this actualy helped me out
can u plz help me when i try to connect my mouse my pc suddenly freeze and the mouse also dont work
Thank you so much! Nothing worked until I did the system restore and MY MOUSE WORKS AGAIN 💪🏼
If I use left side USB then my mouse do not work, if I change to use another USB then my mouse work properly. How can I solve my left side USB.? My USB is ok because if I use it without mouse then its work like extra keyboard also conncet & also connect pendrive but when I connect mouse on this USB its doesn’t work. Please give me solution how can solve this
For me the dpi and the scroll doesnt work and i cant fix it the mouse is good when i was updateing some software for changeing dpi and other stuff the mouse fucked up
Perfect🙂❤️
Thank you it worked for me after uninstalling USB root hub
Mate i cant see the mice and other pointing device
How about with the laptop touch pad mouse
nothing above worked kinda odd, cause it worked perfectly yesterday then there was update and ive checked 4 diff videos for eny other solutions so idk
I've done all of these. My mouse works in BIOS but once I enter the main screen it just doesn't want to comply
My port works. I tried plugging different things into it and it works fine. I tried plugging the mouse into other ports and it doesn't work except for the ones at the back. Both the mouse and the ports work but that port in particular doesn't let me use my mouse.
Same
idk how i didnt think to restart my laptop 🤦♂ . thank you for the help lol
Thank you very much
Mouse lazer is off The windows say the device ia malufunctioning the mouse work perfectly on the smart tv ... And i can't fine mice an other pointing devices in device manager
Didn't even have to update the driver. Uninstalled, restarted the pc and it started working again.
Humanity's greatest invention really does come down to turning on and off lmao.
Mice and pointing devices doesn’t show
Had raw accel installed.
Downloaded Custom Curve Lite.
It corrupted.
I uninstalled both.
Fixed then broke on restart.
Reinstalled raw accel.
Fixed.
Uninstalled raw accel.
Restarted.
Fixed.
Bro i cant find mice and other pointing devices
Thank you
Thanks gumana na , Ang nag worked ay yung sa task manager yung Restart windows explorer
Yoo it worked ty
Tried all of these and not working
MY FUNCTIONS ARE WORKING BUT I CANT MOVE MY MOUSE!! :(
How did u deal with that cause l have same problem now ?!
task manager> peformance> windows explorerer or
get new mouse for 20 bucks
@@PakistaniEagle-a Thanks for help but problem has already been solved
Thanks
thanks
None of these works but when my pc stops working then i unplugged it and i plugged it in again... My mouse works again
Yeah let me fucking do all this when my mouse doesnt work
that was usb for me! thank you.
i have tried all these methods none of them work, i still have no mouse or keyboard working, what next?
Mouse red light is coming but cursor not coming
NOT WORK 😢😢
Plz.I need HID compliant mouse
Direct link 😭
I have fixed my mouse by my own. I just smashed my mouse's left side...guess what!!!! it worked
Another reason to go Mac
It just disappear
Just wanted to let you know u fucked up my computer even worse me following ur steps. I uninstalled USB controller and now my keyboard doesn't work smh.
No it doesn't work.
نه این کار را می کند
None are working sadly
i don't have it
non worked but good advice
mouse always works in window 10 because windows 10 is svga. yes it is. windows was always dos in a skirt and windows 10/11/12/13... is still dos in a skirt. dos programmers, like myself, had to compensate for the mouse driver in text mode. by this i mean the default mouse driver x/ys was always and is always assumed to be 640x480 and the x/ys are reported based on that. there is no such thing as 0,0 or 1,1 in text mode. the mouse driver sez no, man. we can't have that. it doesn't work. it's no good. You have to make up the difference with a prepossesser directive or inject hardcode every time the mouse function is called.
#define FIXx x = x / 8 + 1
#define FIXy y = y / 8 + 1
You will forget to do this sometimes. your program will shit down your throat. debugging will make you see the light. it takes a while.
why wasn't this thought of based on video modes long ago and stuck in a library?
Now my keyboard isn’t working
None of the methods worked
Slow down!!
windows 10 is so fucking garbage
Mouse not moving? Change battery problem solved and who uses a wired mouse lol
Yes, but the video contains solutions even when mouse doesn't work after changing the battery.
Thanks for making it worse. 😭
I'm really grateful I watched your video I am truly thankful you really saved my life turned out I plugged it in the wrong one LOL anyways go subscribe yall