Nice job. Been on a gates course and the core plug is there to collect a small amount of coolant as the seal in the water pump (shaft/bearing) end seals up when its run up for the first time
Would love to see this! My Zafira VXR is currently 320bhp. It’s never let me down and it’s a blast to blow hot hatches etc off the line 😂. Do it Aaron please👍🏻
Great video as always 🙏 definitely want to see you stage 3.5 the boost bus 👍 I always torque the wheel nuts and most other bolts tbh on the cars I work on,might aswell if you have botherd to buy torque wrenches 😆 can't wait for the next video 👍
So good to see that even in your vast knowledge of building cars and the thousands of bolts you must have tightened over the years your not arrogant in thinking you don't need a torque wrench to do up wheel bolts. We are after all only human...
Awesome man what's the difference between how it is & stage 3.5 0-60? Also fuel economy difference? Can you get cruise on those? Pretty interested thanks
Can you please advice me I bought another Astra mk4 gsi Z20let (love these)and have a spare ecu of my old car (stage 2) Iv fitted all mods previous Astra had on it will it be ok to run the mapped ecu ?
Loving the zafira content my water pump kit just arrived from Kurt yesterday can't beat Kurt's products and he gets them sent out straight away. Am running fmic 3" turbo back Astra vxr turbo crossover delete but still on standard map waiting for RnD to open again so I can get it down for a stage 3.5 map got my Injectors and maf ready to go on, on the day of mapping Do the vxr and the gsi use the same fuel rail?
Honest question, can you sort my car? It’s a Z20LET with a VXR turbo. I need the new FMIC fitting, VXR injectors fitting and a 80mm MAF. It’s got a precat delete, 2.5” sports cat, miltek race tube and backbox all fitted.
Hi Aaron. I have a mk5 astra vxr. Can you transfer data from 1 cim unit to another. Have a problem with my keyless entry but have a donner unit. If not you know anyone or maybe someone in the comments can help.Pretty stuck at the moment mate👍
I know for a fact Azz is not gonna get 1 wink of sleep knowing that theres so many surface rusted parts on the Zaff I bet he's got a parts order going in 2 foot long 🤣 OCD upto 11
Wastegate spring is 8psi standard, so it sounds like the boost control solenoid may have gone. So once the turbo boosts to 8psi the wastegate opens and drops all the boost
Hello mate. I change the front one about 5 months ago as old one was doing the same, the car has always done this even with the let turbo on. Have a stage1 vxr turbo, new vac line, new map sensor , new maf, crank sensor vxr plugs , haven’t changed fuel filter yet, don’t think it’s Eva been changed
I have a dialy zafira I'd like to boost a little 🙈 make the school run a little more interesting 😉, it's completely standard. Where do I start ? 🤔. I don't want to lower it and the body will stay standard, it will be interesting to see folks reaction at meets 😄. My partner has a very nice mitsubishi lancer
I can't understand why you don't have over 100k subs. Easily the most informative car channel.
The boost bus is back 👌 get it 3.5 👍
"I know you are thinking how many uggu duggas are in 110nm" 😂😂😂
your heads above the rest of the youtube mechanics m8
keep up the good work
an i hope your channel blows up as you deserve it top man
Do it 😁 just want to say I really enjoy watching your channel. Never owned a Vauxhall before but the tips and advice you give is great. Keep it up 👍
Yes Aaron just what I needed to see the zaf gsi alway welcome 😀👍
I don't even like vauxhall's,but always watch all you're vid's.Very good info and tip's in all of them.
Cant wat for the next video, good work as usual👌🏻
Great video Aaron,nice work 👌
Great video Aaron defo on the 3.5 zaf would love to see how you do it, mine will get there eventually maybe this will the the encouragement I need.
DOOOOO IT WE WANT STAGE 3.5 BOOST BUSSSSS 😂😂😂🤘🏾🤘🏾💯
Great stuff, deffo turn it up Aaron
Nice job. Been on a gates course and the core plug is there to collect a small amount of coolant as the seal in the water pump (shaft/bearing) end seals up when its run up for the first time
Get it done. This is gonna be a good one.......
Absolutely awesome 😎
Them 3/8 millwake guns are awesome they will even tackle wheel bolts, the battery ratchets a good buy too
nicely done bro. that pink screw driver is sick
Would love to see this! My Zafira VXR is currently 320bhp. It’s never let me down and it’s a blast to blow hot hatches etc off the line 😂. Do it Aaron please👍🏻
I’ve always torqued me wheel nuts down and I always tell tyre shop not to use air gun on my alloys either
Great video as always 🙏 definitely want to see you stage 3.5 the boost bus 👍 I always torque the wheel nuts and most other bolts tbh on the cars I work on,might aswell if you have botherd to buy torque wrenches 😆 can't wait for the next video 👍
Yes stage 3 ♥️
Yes do it! Big up the bus 👍
So good to see that even in your vast knowledge of building cars and the thousands of bolts you must have tightened over the years your not arrogant in thinking you don't need a torque wrench to do up wheel bolts. We are after all only human...
Your knowledge is insane and ya cars wow major jealous lol great video
Awesome man what's the difference between how it is & stage 3.5 0-60? Also fuel economy difference? Can you get cruise on those? Pretty interested thanks
Looking forward to this one.... what sort of power can you expect out of one of these?
Great stuff, how do you get into modifying these ECU's? I mean where do you learn stuff like this?
Can you please advice me
I bought another Astra mk4 gsi Z20let (love these)and have a spare ecu of my old car (stage 2) Iv fitted all mods previous Astra had on it will it be ok to run the mapped ecu ?
Miss my old Zaf GSi. Was featured in Total Vauxhall back in the day...went a bit mental with it.
Loving the zafira content my water pump kit just arrived from Kurt yesterday can't beat Kurt's products and he gets them sent out straight away.
Am running fmic 3" turbo back
Astra vxr turbo crossover delete but still on standard map waiting for RnD to open again so I can get it down for a stage 3.5 map got my Injectors and maf ready to go on, on the day of mapping
Do the vxr and the gsi use the same fuel rail?
I always use and have done 120nm on wheel bolts. 👍
Love the zafira Aaron got one myself now having mine remapped to 3.5 would you take out the middle box it's got a full stainless miltek turbo back
Really want my red zafira gsi mapping. Good videos mate
Red very rare😎👍
I know mate, I’ve had it 3 years. 22 uk cars made in red.
Get it done u know u want to
Yer do it, sounds cool
My torque wrench was stolen, il be making sure that’ll be the first thing on my shopping list! 👍
So does that mean with a faulty water pump u get air in the coolant system and over heats.
Honest question, can you sort my car? It’s a Z20LET with a VXR turbo. I need the new FMIC fitting, VXR injectors fitting and a 80mm MAF. It’s got a precat delete, 2.5” sports cat, miltek race tube and backbox all fitted.
That core plug is probably like that as thats the weep hole for the pump bearings, vote for big boost bus to!
Lotta videos, I like it! Drive an Opel too, but its a Mk7 :) not really power
What did you use to remove reg plate tape off the bumper ?
Friends got one of those. Rolling road printout at 349bhp..Impressive for a bus 😂
"If you ain't over 30 psi, don't talk to me"! 🤣 🤣 🤣
Yes do it
Hi bud great vid we're can i buy this spax springs from for my zaf gsi as I got apex and it horrible need better spring in my zlet life :)
Struggling to find a Z20NET actuator that's going to fit my vauxhall, replacements online seem to be designed differently
Got a corsa c z20let need your help with where you based will you take on work
Everything from the silver Astra that can be swapped over to the boost bus would be a laugh
Please turn it into a stage 3.5,would be nice something different to see on the channel 👍🏻
definitely want to see that love the look off
they buses lol
What software do u use for mapping ecu
Iv got mpps for flashing
I want to map my ibiza cupra
Or could u map it for me
Get the boost bus boosting pal..! 💪🏽💪🏽
Bring on the 3.5 👊🏾👍🏾👌🏾
Where do you get your supply's from ??
Hi Aaron. I have a mk5 astra vxr. Can you transfer data from 1 cim unit to another. Have a problem with my keyless entry but have a donner unit. If not you know anyone or maybe someone in the comments can help.Pretty stuck at the moment mate👍
Stage 3.5 it 👌don't think I've ever not torqued a wheel bolt think my old man would batter me if i didn't as he drummed that into me
I laugh every time he says: “These nuts” 😂😂
Had 3 zaf gsi’s brilliant cars and weigh less than focus st 😂
Love the vids would love to put a z20 let in my combo c iv done all the suspension now just needs the power 💪what's your thoughts on a saab b204 🤔
Do it mate get on saabworks on facebook it's a cheaper more reliable and far easier tuneable engine
@@lukecowell7516 I will have a look mate thanks
What's happened to the fiesta?
Always torque my wheels up with a torque wrench 👍 could you show us how you set up actuators Aaron?
Alot people use the half a hole off method,👍
I can’t keep up with all the cars on the channel now
DO IT!!!
Where is the ecu on the zafira please
That could be awesome. Give it a go and show us how. I don't suppose you fancy a Vectra 1.9CDTI SRI next........
Whats up with the vectra
Suuper. 👍
Do the zaf pls, got a blue one which is off the road, need some motivation
hi maybe can give suspension link ?
Aaron 3.5 it 👍👍👍👍👍
Make it 3.5 but can you please leave links as I have a Zaffy gsi
PLEASE leave links as want it reliable
Yes max out the boost bus
3.5...do it 👌
Did u sell it mate
Fancy remapping my zaf tourer sri diesel 😁😁
Is that a boost bus 😎
I know for a fact Azz is not gonna get 1 wink of sleep knowing that theres so many surface rusted parts on the Zaff I bet he's got a parts order going in 2 foot long 🤣 OCD upto 11
Hell yeh
Sleeper build!
yeah boost busssss
I want your red GSI 👍
Love it have one myself and wish I had your knowledge as would love to strip it and rebuild it
Go balls beep brother. Wish my sxi was turbo 😭
😂😂😂😂🤘🏾
Hello mate, are these standard at 7 psi? Cause mine don’t go past 7 with a vxr turbo and unsure as people say the are 12psi over boost to 7 .
Wastegate spring is 8psi standard, so it sounds like the boost control solenoid may have gone. So once the turbo boosts to 8psi the wastegate opens and drops all the boost
Hello mate. I change the front one about 5 months ago as old one was doing the same, the car has always done this even with the let turbo on. Have a stage1 vxr turbo, new vac line, new map sensor , new maf, crank sensor vxr plugs , haven’t changed fuel filter yet, don’t think it’s Eva been changed
T piece the 2nd boost valve at the rear of the engine
HutchSco I’m already remove the rear one mate
I torque everything..
Buddy, can you send me some of those zlet maps?
C est un nouveaux projet ?
Mine is 300 bhp + also
I have a dialy zafira I'd like to boost a little 🙈 make the school run a little more interesting 😉, it's completely standard. Where do I start ? 🤔. I don't want to lower it and the body will stay standard, it will be interesting to see folks reaction at meets 😄. My partner has a very nice mitsubishi lancer
Love the red tape over your webcam.....to remain anonymous 😎
Should I boost the power of the fanny van...... does a bear shit in the woods, need u ask lmao
Winols i use ecm its so much easier to use
Aaron rebuild my engine
Just so you know, sachs is pronounced sacks.
Hy,i own a z20let, can You send me on email the map You put on the Zafira? I pay you on pay-pal
Fucking hell Aron whats your goal on yt? If its a work in motion haynes manual your bob on it mate. Move on to Hondas next please
3 ugga duggas then? 😂
Woooooahhh slow down m8 take a breath lol
I instergram you
Tu parle trop