THE ECOBOOST MOTOR IS IN
HTML-код
- Опубликовано: 12 июн 2021
- Got the motor in and started plumbing some things. Also mounted up the cup car pump and ran a bunch of lines. Excited to see it fit correctly and start finalizing some fab and items needed to make it run!
Big ups to BC Racing for bringing this awesome build to life! - Авто/Мото
Hell yeah getting closer hyped to see this beast drifting
I would make those front fenders in steel. You could then take moulds off them for infinite supply of spares. The shape looks like two stock metal ones could be cut up to get the well right. Crash protection in the 70'S was carrying a rubber in your wallet and a lap belt lol.
You've validated my fan shroud philosophy I've always been told is wrong. Lol
This is a dream build. Cannot wait to see it rippin
Such an awesome unique build. Can't wait to see you rip it
Cant wait to see you kill it at Englishtown!
im so excited to see where this build goes. There are a few foxbody guys with an ecoboost swap around, but none of them will be drifting like this will!
Good job on the motor mounts Kellz!!🤙🤙 came out really good! Keep putting in the work brotha 💪💯🙏
Absolutely dope!
Is he talking about the drift week that happened like a couple months ago? Lol. Either way stoked to see how this thing is shredded
Yea… I’m slow to get these up
Yea I laughed when he said “if you see this and drift week’s already started…”
The fox is gonna be sick. Cant wait to see it tandem with the Fun-Haver fox. I probably should have went ecoboost swap for my T-bird, for my wallets sake. A Barra can get expensive quick.
Great vids
Need more build videos. Digging the content
Ya i call em death traps. I dont like driving it at high speeds. lol. Coming along. Cant wait to see this baby rip.
I know you said you go through a lot of fiberglass but the Maier kit can be bought with the wheel well moved forward to account for how most of the angle kits move the wheel forward
There's bolt on overs you can get. Matt Farah had a set on his car. It comes as a front and rear kit but the front and rear are the same IIRC.
Dude no way I always wanted to ecoboost swap a fox body that’s sick your doing it
The sound of that engine is not great from the factory, agreed! A good selection of resonator/muffler type/intake manifold can change a lot tho! Could be raspy and tinny, or growly and burbly. I haven't heard a trumpety/VTEC/VR sound from one, but I bet it can be engineered. The 5.0 LX had the coolest dual tip exhaust imo from that era. They had the twin angle cut stainless 2.5in straight. The GT I thought looked dopey with the derp bumper and the turn downs. Dang that's gonna be a cool combo. Have you thought about doing an SVO style hood as a subtle nod?
Are your caster camber plates under the shock tower instead of on top? I cut my wheel well and move it forward 2 inches and just filled the gap in the rear.
I could design a custom kit if you’d want, make this thing look pretty sick
My insta is derpy.design if you want to discuss it
Good luck in rd 3.
Had a foxbody for my first car the first the we did was to the entire car was chassis reinforcements they twist and bend so easily but they're so worth it!!
Watching this build is almost the exact thing I wanted to do to mine 😅
What if you cut the fenders tight to the arch on the rear and further out up front, then swap the cutouts from side to side to move the wheel arch forward.
Do you have suffrage connectors front to rear. I also ran a strut tower brace. Thats number one things back in the day
Eco boost....motor build 👍....Mk 1 escort ,yes...
Around 9:00 you said you were hoping to offer a plug'n'play solution with a base map. I was wondering if anything ever came of that? Thanks!
Was this supposed to be used in drift week 3? that's why you said it might be delayed :o
Haha thats was the idea. But parts delays killed us
Maier Racing has Fox overfenders. Not cheap though.. Glad to see she's coming along. Looove the build! www.maierracing.com/shop/fiberglass/individual-parts/79-93-mustang/
I've no idea how to build a car but i'm sitting here nodding all the way through
cringe asf
Wen it comes to the front and the rear in a mustang it’s a love hate relationship some days the rear wants to do wat ever it wants and others it listens to the front end lol
Please use a fan shroud if you are worried about heat, it makes the fan 2-3x more efficient. If you are really concerned about the fan blocking airflow you can make holes with flaps in the shroud that open with enough air speed.
While I do agree about the shroud and I run fully shrouded fans that are engineered for drifting on most of my cars. I put one of these fans on one of our school cars just like this and it worked unreal well. So I’m debunking stuff and trying things.
@@chelseadenofa In my personal experience i had unshrouded fans on my car and it would overheat at curisng speeds 30-50 but I put a shroud on it as well as big fans and it works amazing. It has the pass through holes as well. But It is a miata and the kit is from flyin miata so it's a tested kit, I can't say the same for a mustang and a diy shroud but just my 2 cents, I'm sure you'll figure out what's best.
My sn95 felt like that until i got a watts kit on the rear end and weld in subframe connectors.
🤘🤙🏼
❤️
I wanna drop one in a 94 ford ranger lol 🤙🤙
Wil the zf adapter be available to the public??
🤙🤙🤙
Don't know if you have mentioned before but what K member are you using. I know some K's make the wheels sit forward like that and others dont. Just a thought.
QA1 with the arms moved forward.
Now days that is a hell of an option for a swap into anything!!!
Chelsea ive seen fan shrouds fabricated with holes and rubber flaps to solve the air flow whilst moving issue
Yea for sure. All OEM cars have them as well. I do have another fan for the car that will work much better but these little things blow a real world 2500cfm
A) love this project, it's so cool
B) why not run the same body kit as Vaughn's foxbody
Vaughnss Foxboddy is a Hatch so there is different dimensions that might mess up the body kit. Also Vaughns car was built over 6 years ago the body kit might not even be in production anymore unfortunately which could be why he hasn't fixed the body damage from over the years.
Why does he have to built it like Vaughn's??? He can do whatever he wants
Those are just flares
Also his wheel isn’t moved forward a ton
Type of motor is that that you're putting in there and what year is it from?
2017ish ecoboost
2017 ecoboost
Thank you for responding so quick Chelsea denofa I would love to have you as a networking contact if possible? Please contact me KindSoulKing@yahoo.com or I can give you me cell # I'm one of you biggest fans !!!!
its almost time for a swap on my e36... eco36 maybe
What type of ecoboost engine is this?
2.3
Put Japanese hotboi overfenders,sideskirts,front and rear bumper or custom the bn sports s13 bodykit to fit on it
I like cars without aero to destroy. Stock style is best for me, but obviously it’s not as cool
@@chelseadenofa reliability > style
I get it
Any chance you will compete in Clutch Kickers with this car?
Might be a plan
you got your silver button yet
You could just section and slide the whole fender opening forward
Yea. But I’d have to do that to at minimum 3 pairs. Which IMO the best way to do it is using part of another fender.
@@chelseadenofa True. Maybe a good technique for making a master should someone decide to mold it and make a few out of glass.
Please make good noises with that motor
Where are you getting this engine for $2000?
I just bought one for 2350 last month. 130k miles 15’ mustang
@@chelseadenofa Im in Canada and you got me looking for chassis and engines to start a build like this. So, sick
2k for an engine? I guess thats used right?
Yes
It's a Ford it should have the Barra..
Way too heavy. Way to tall. Way not the motor for this project
@@chelseadenofa u chose a sweet engine with good power and plenty of parts. Coming from a jz RB kinda community it would be really cool to see the Barra shine. For reasons u mentioned is probably why we haven't seen it.
Barra is popular in places where you can get lots of parts off a junkyard. That is not America.
WHERE ARE DEY 2 GRAND?!!
I bought one from a salvage yard for $2200
Hit up @jon Duncan he can get you overs
Chelsea will punch a takeover kid in the face for every like on the video!