There is some good RUclips channels out there, but I must say this is by far the best one yet. Never change bro keep on smashing it out the park like you do best!! Super proud of you
You're a master craftman jake! 😁 Great job and amazing attention to detail in showing how it's all done. I'd definitely weld up the seams to prevent future water pooling causing rust in the seams. Plus a nice clean seamless look 👌This VL will turn out so nice when done 🤘😜 Proud of ya brother!
Having done a million of these I was swearing at you for the first 15 minutes because of how you cut the plenum off but then you put the old one back on and only used what you needed from the new panel 👍saves so much trial fitting .. put some blankets over your floor pan and boot areas all those sparks will be rust tomorrow .. great video 👍
Great work Jake, another very informative video. One of the coolest channels around that actually shows how to do repairs. Thanks for sharing your experience.
Not as bad as my dads car I love holdens but when seeing them like that it breaks my heart I would so love to restore my dads one but I don’t have the money but watching your video has made me want to restore it even more
Awesome work mate I had a winner with my vl not much rust Awesome tricks for the vl or vk as the next project I wouldn't mind video with dash loom install
Got a 50 cent rust spot on the rear window drivers side of our VL the only rust in the whole car I have a section from another VL to patch it cheers for the vid my only other problem is the fuse panel under the bonnet has cooked a fuse so changing that
Your channel is becoming really good mate, editing also is looking very professional, don't know how u do it as well as work on all the cars. Think the vl u painted yellow u should of kept 😂 had a much better body. But looks like your sorting it out 👌👍
Hey mate love the videos! Do you do any sort of repairs on other people's cars at the shop or just your own projects? Looking into a VL that needs front and rear window repairs and wondering what something like that would set me back? Cheers bloke
Sweet vid. Pinchwelds on my vr are dissapearing before my eyes lol. I don't have the tools or knowledge or money to get it fixed and not aware of anyone making replacements like this It'd be nice if their quality across the range increased as well. Surely they can afford to refine the same janky shit they've been serving up for a few years now
Fuck yeh man, those repair panel tips are nice! They'll come up solid and clean as. I'll be looking for a paint panel shop to check out my super clean survivor 78" TC gemi and 67" XR falcon paint and panel repairs in the coming year, ill have to look your shop up someday as your in my area, i should bring one of em to your next BBQ and Show day but that's not the time for that talk sometimes haha. Keep up the great content mate it's sick 👊
Well it's nothing new to know that the Rare Spares panels are shithouse...but the rest was informative & yay me lurned knew stuff bout stuff...nah good shit bro...interesting & I like how ya don't fuck around and dribble on
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
There is some good RUclips channels out there, but I must say this is by far the best one yet. Never change bro keep on smashing it out the park like you do best!! Super proud of you
Spot on!
I love how you call it as it is Jake, "it's fucked ,it's dogshit" brutally honest straight to the point,
love ya work.
Just shows how much goes into doing things the right way. Thanks legend!
You're a master craftman jake! 😁 Great job and amazing attention to detail in showing how it's all done. I'd definitely weld up the seams to prevent future water pooling causing rust in the seams. Plus a nice clean seamless look 👌This VL will turn out so nice when done 🤘😜 Proud of ya brother!
Learned more from 2 of your vl episodes then I ever learned in school & trade school put together.
Top job Jake. Yes, every VL I have owned over the past 20 years has had needed attention in those areas, no matter how clean or loved they are.
Having done a million of these I was swearing at you for the first 15 minutes because of how you cut the plenum off but then you put the old one back on and only used what you needed from the new panel 👍saves so much trial fitting .. put some blankets over your floor pan and boot areas all those sparks will be rust tomorrow .. great video 👍
Well done Jake, those Adelaide cars can have some good rust issues from top down, yet the floor can be near perfect.
One of your best videos so far, great content and entertainment.
Nice work mate, done the same repairs on my VK 2 years ago.
Nice one Jake, are you gunna show us how to fix the speaker holes?
My car failed a rwc cause the speaker holes were cut out in parcel shelf 😞
Great work Jake, another very informative video. One of the coolest channels around that actually shows how to do repairs. Thanks for sharing your experience.
Not as bad as my dads car I love holdens but when seeing them like that it breaks my heart I would so love to restore my dads one but I don’t have the money but watching your video has made me want to restore it even more
Great episode, really enjoyed it
Nice one matey. This whole welding cars malarkey used to freak me out. As the years go by,it gets easier. And you make it look easy as.
I’m another one to comment that 6:21 is so relatable 😂😂😂 that was the best
Got started on mine today, man you make it look easy lol
Legit count down the hours to the next video every week. Keep it up man, loving it!
So that's how it's done, thanks for the vid.
6:21 every word out of me, 30mins into working on my VL’s 😂 Another ripper vid Jake; loving the content mate 🎥 🔥
So true, so relatable 😂😂
Great stuff Jake! I’ll probably never own a VL but seeing how you work and go about things is gold.
Loving the channel mate.!
Awesome job mate handy ideas
Awesome work mate I had a winner with my vl not much rust Awesome tricks for the vl or vk as the next project I wouldn't mind video with dash loom install
Jake straight out your a sick C***
very knowledgeable
taught me some tricks, good job brother!!!
Good job Jake!
Great vid as always man keep it up
Excellent vid, cheers man
Thank u for explaining the rust panel that's what I been waiting for
Great video as always Jake. I love watching all your stuff. Some excellent tips for doing my car.
Great video. Thankyou
Got a 50 cent rust spot on the rear window drivers side of our VL the only rust in the whole car I have a section from another VL to patch it cheers for the vid my only other problem is the fuse panel under the bonnet has cooked a fuse so changing that
Mate your eye for detail is incredible 🎉 doing fantastic how to vids bruv 💯🏅
best video yet jake👌🤙👍
Another awesome video Jake, thanks for the good tips.
Your channel is becoming really good mate, editing also is looking very professional, don't know how u do it as well as work on all the cars.
Think the vl u painted yellow u should of kept 😂 had a much better body. But looks like your sorting it out 👌👍
Hey mate love the videos! Do you do any sort of repairs on other people's cars at the shop or just your own projects? Looking into a VL that needs front and rear window repairs and wondering what something like that would set me back? Cheers bloke
I joy you videos mate they help me lot with my build keep up the good work looking forward to the next hour video
My vl definitely needs this. Good info tho
Good work Jake learning heaps from you
You not worries about the hot grinding sparks melting into your engine and boot paint mate?
Great video, Jake. It's very informative.
What is your mig wire preference
.6/.8/.9 when welding cars
Sound all good on my end
The Homer scream at 8:08 😂😂😂
Great video!
I'm getting this done this month on my vk front n rear windscreen how much u reckon to do this labour so I know a ball park n aunt getting rip off
People that complain about the cost and time of rust repairs or about panel shops not wanting to do rust repairs need to watch this video…
Far out Jake, is there anything ya can’t do? Haha fkn champion!!! 💯👑🙌🏽
Good old strategic whack always works wonders, keep doing you mate and keep up the good shit 👍 🍻
Nice work, love the videos. 👍
Absolute legend
Can't get to much VL content brotha
Awesome! Thank you for the terrific vids and your hard work
Nice work mate. Is that Venetian or cardinal red?
Awesome video as usual, keep em coming 🤙 mans got talent
With all the neat fab work in the boot, I’m surprised at all the rust.
Do you have plans to show the car at summer Nat or just skid/drive it. It all ways be a show I want to get to. I just noticed are you left handed
Quality work mate
Sweet vid. Pinchwelds on my vr are dissapearing before my eyes lol. I don't have the tools or knowledge or money to get it fixed and not aware of anyone making replacements like this
It'd be nice if their quality across the range increased as well. Surely they can afford to refine the same janky shit they've been serving up for a few years now
Smart moves
Was so scared of the kinger in behind the vl 😮
How much to do this to front and rear windows on a VH Jake?
Cheers
10hrs in it so I’d say 1000-1200 plus materials.
Nice work man
Funny enough i set my dash and ecu on fire today.... literally from welding the cowl.
If only I'd watched this sooner
Sweet!
Fuck yeh man, those repair panel tips are nice! They'll come up solid and clean as. I'll be looking for a paint panel shop to check out my super clean survivor 78" TC gemi and 67" XR falcon paint and panel repairs in the coming year, ill have to look your shop up someday as your in my area, i should bring one of em to your next BBQ and Show day but that's not the time for that talk sometimes haha. Keep up the great content mate it's sick 👊
Jake your a fkn legend bro awesome work mad content 👌love the channel 👍
Boom!
Did a cut with nothing removed, but hey, hilux
You need to do a “manipulating” shirt with a rubber mallet logo😂😂😂😂😂 fk the technical shit
I can see this chanel thriving as the ol "Iron Empire " slowly goes to shit unfortunately..Keep these type of videos coming please.
☝️☝️☝️👌
Is it just me or no sound ??
Sound is working for me just fine.
No sound
Working perfect for me
Your a fkn weapon mate. Love your content
Well it's nothing new to know that the Rare Spares panels are shithouse...but the rest was informative & yay me lurned knew stuff bout stuff...nah good shit bro...interesting & I like how ya don't fuck around and dribble on
He reminds me of Kurtis from Cutting Edge Engineering, why because he doesn't f#%k around.
Yea na deffas no sound for me re loaded the vid 5 times now
Working perfect for me
@towking4485 it just needed a 8th reload come right
Early commodores, bro battery trays that are actually a part of the frame and not removable 😆
Rare Spares looks more like Who Cares Spares
Is it just me or what. No sound only video
Working perfect for me
Why must there always be some clown doing a burnout?
Just casually watching this video for the 10th time waiting for a new episode to drop