I thought about what name you would give the truck, and I have a suggestion.. The bountiful BRZ, The drift car Jenny, the riced out Jasmin and the big truck Jeff.. what do you think? Could Jeff be the name?
And Robbie here’s a suggestion about the genesis, I’m no mechanic but I’ve seen enough videos and lowered cars in real life. When you first install coils or lowering springs, they are super stiff and sit high. So if you can drive it around as much as you can, push down on the front end a few times bouncing it, and just let it sit over night with all the weight on it, don’t put it on the lift. Figured I’d tell u this cause in the vid it need to come down more in the front and you were gonna try to fine tune it again. So if you just give them 24-36 hrs to break in and drive/bounce it as much as possible! Sorry I know this was a long comment but figured I could possibly save you some time frustration.
Robbie! I think you should take a shot at trying to wrap that diffuser part in black. That way if you don't like it or just want to go back to all white, you can peel it off and no harm done. Also back windshield on the truck 100%! Awesome vid!
I agree with emren lmao. I'd say read window for the banner. Just a side note, you've inspired me to finally start the Car RUclips channel I've always wanted to start. I haven't made it yet but I do have 2 videos ready to edit and upload with parts on the way for more. So id like to say thank you for giving me the inspiration to finally do it. Can't wait to order my first bit of merch too 😎
Banner on the rear window, Robbie we all get it, it’s expensive don’t worry, we like to see you work on cars and vlog and if we have to wait till you go to the track we’ll wait. Keep doing what you love
id love to see robbie go back to the roots more, rewatched some old videos and he seemed much happier with the wish civic build. You've got a lot of projects on the go, I think maybe it's time to focus on one.
If you want a banner on the truck, rear window for sure, not a single doubt. Placement is up to you, but I would probably put it in one of the lower corners
Man Brad is sooooo lucky that fork didn’t come loose and go right into his new tires that would have sucked ! And as far as a banner on the truck maybe you should do just a smaller sticker in the drivers side bottom of the rear window ? Or a thinner banner at the top ?
Check and make sure the spare wheel well is ok with the Mazda. Those plastic bumpers can pull back into shape but the metal behind them can be damaged.
There is a way to adjust that ark exhaust to sit higher. You need to modify the pipe the mufflers are connected to and it will raise the mufflers hogher
When painting that car u needed to address the Fluid Flow of the Gun plus the paint needs to atomize with the 2k Bascoat.And you need to get in the flow with a little more speed only 5 inches from spraying the panel still a good job but could have been better.
Every lotus has a dedion rear suspension arm. And they're some of the best handling cars in the world. It works very well and is easier to tune than most think.
Not sure how it is in Canada, but in UK you can get trade insurance that gives coverage on many vehicles for cheaper than insuring them as a personal vehicle, may be worth calling an insurance company and asking what options you have for a different policy to suit
I would put the banner down the driver (or passenger) side of the car going from top to bottom:). Another reason to move to AZ I believe the tracks are opened last time I checked (and it’s sunny...ALL THE TIME **give or take a week**)
I have the white window banner on the lower rear window of my pick up truck, and it really pops considering my truck is bright white and I think it's a very good location for it
If you want to use the jenny for drifting then you need to set up the coilovers for performance and usability rather that fitment, which means raising the rear and having the correct preload setup (roughly 5mm)
ROBBIE! DO ANOTHER DESIGN OF THE COMMITTED CREW LOGO IN MORE "OFF-ROAD'y" STYLE AND IT WILL BE ON POINT FOR JEEPS, TRUCKS, SUV AND SO ON! UPVOTE PLEASE!
Yo Robbie, I get you. I daily a genesis on the east coast, and insurance is expensive as well. If you don’t have to insure it and can get it to the track and back, go for it !!
The rear suspension is just like my 2009 Kia Optima, where the bolts are accessible from the wheel well and you don't have to open the car, that was nice when I had to replace the rear shocks!
I love your videos man! I've been watching since you got the BRZ and I remember I saw you driving in it as I live in Coquitlam too!! I recently got a Genesis Coupe 2.0T and I can't wait to mod it over the summer! Any tips?
What if you paint the bumper in the back same as your wheels (the part you intend on colouring). Might go well with the rest of the car (you could maybe try colouring it in fotoshop and show the process before sending it, as like a cheaper option than sending it and than not liking it and changing it afterwords)
Just get a day permit and take some back roads and spend the day dialing in the suspension. Also, you can wet sand and polish the crap out of that paint if you want to and make it super smooth, just keep away from the edges. (I work at the craftsman around the corner from you guys)
And about the insurance - If it stays inside the shop most of the time, it will be covered. right? If something sinister would happen? And since its a track car, insurance wont help either way.. So imo you made the right choice my guy. Keep it up
It’s a Hyundai thing for the weird rear suspension and the no access from the trunk for the rear suspension. I found out the same thing when I bagged my 16 Veloster
Banner on the back window of the truck 100%
Upvote so he see's this!
p.s notification gang!!!
For sure back window
I second this!
Yes 100%
I triple that!
Top of the back window 100%
Put the Banner on the Back Window :)
Wheels look so small, definitely run fatter tires or get bigger wheels 👌👌👌👌👌
He could do a newer R-Spec size and it would make it look (in my opinion) better
225/45R19 and 245/40R19
Luis Cardona yup
I agree, rims/wheel setup is too small for that car.
Def 245 front 275rear
Never clicked so fast on a vid
I was literally boutto type the same thing, word by word
Same haha
Same lmao
🤣
4:40 “so Robbie what torque spec did you put those top coil over nuts at?” “Um roughly a couple of ugga duggas “
너도 로비로 가자
Honestly, since the change in videos I’ve seen such a difference in your mood, you’re a hell of a lot more exited and enthusiastic about projects now!
"Who even likes stock suspensions anyways?" Well, my broke ass gotta learn to like my car's suspensions for now
Never have I related to a comment so much in my life 😂
They don't even make aftermarket suspension for my car :(
Alexander Dotzko what car do you have
Dump it on racelands
The videos just get better and better!!
I thought about what name you would give the truck, and I have a suggestion.. The bountiful BRZ, The drift car Jenny, the riced out Jasmin and the big truck Jeff.. what do you think? Could Jeff be the name?
GUYS! Whats money better spent - AIT front bumper or Raceland Coilovers?
I currently just want to buy one of these options
If you’re on stock suspension definitely the coilovers
I’m loving the new soundtrack on these vids. Keep up the great work Robbie.
@5:05, how’d you put the bolt back in? The one that you were struggling with
joined this channel after the Fitment industry collab, and gotta say I'm surprised I haven't found you earlier. Keep it up! Love the content!
Whole car looks sooooo much better now! Lowering it really complimented the wheels as well. looks sick!
And Robbie here’s a suggestion about the genesis, I’m no mechanic but I’ve seen enough videos and lowered cars in real life. When you first install coils or lowering springs, they are super stiff and sit high. So if you can drive it around as much as you can, push down on the front end a few times bouncing it, and just let it sit over night with all the weight on it, don’t put it on the lift. Figured I’d tell u this cause in the vid it need to come down more in the front and you were gonna try to fine tune it again. So if you just give them 24-36 hrs to break in and drive/bounce it as much as possible! Sorry I know this was a long comment but figured I could possibly save you some time frustration.
Robbie! I think you should take a shot at trying to wrap that diffuser part in black. That way if you don't like it or just want to go back to all white, you can peel it off and no harm done.
Also back windshield on the truck 100%! Awesome vid!
ive been waiting for this one!! its gonna look sweeeeeeeettttttttt
Genesis builds! We have one going too! Such a dope platform to build on 🔥💯
You just saved my day Robbie!
Just got out of surgery and I see this pop up! So excited LMFAO
11:45 insert fork in the road joke
Glad you started uploading more frequently asap! Keep up the good work man!
Love the way the car is turning out!
Just had to work a 14 hour shift. This is the perfect way to come off a HORRIBLE work day 😍😍😍
You'll probably want to bring the rear up half an inch. It'll be better on track, help compensate the lean, and increase the exhaust clearance
Should’ve gone with pbm for a true coilover for the genesis coupe. Lots of us big boys are running them with a full fbm suspension
I agree with emren lmao. I'd say read window for the banner. Just a side note, you've inspired me to finally start the Car RUclips channel I've always wanted to start. I haven't made it yet but I do have 2 videos ready to edit and upload with parts on the way for more. So id like to say thank you for giving me the inspiration to finally do it. Can't wait to order my first bit of merch too 😎
Banner on the rear window, Robbie we all get it, it’s expensive don’t worry, we like to see you work on cars and vlog and if we have to wait till you go to the track we’ll wait. Keep doing what you love
I can't wait to see you paint the bumper accents black. She's gonna like so fresh.
Robbie is so sympatic.I love your vids
I love how fast he put this together. Love to see his progress! ❤️
My e36 has the same rear suspension setup. Not sure how many other bmws do?
Back window for sure for the banner on the truck! And that fork was the funniest shit 😂
This makes me real excited, I wasn’t really into the genesis build but now I’m keen
Just gotta say really been enjoying the music choices lately
Does Genni have a blow-off or bypass valve on the turbo?
On the rear of the truckkkkk.
Hope ur new mindset is going you well! You are having a lot more fun in you videos again!
Peace from Aus
For a truck put the banner sideways going up the side of the front windshield if that makes sense or across the rear window like Emerson said
id love to see robbie go back to the roots more, rewatched some old videos and he seemed much happier with the wish civic build. You've got a lot of projects on the go, I think maybe it's time to focus on one.
I literally just made a video about this and sold the truck to focus on one 😂
Love the mazda 3 on the rx8 wheels.
If you want a banner on the truck, rear window for sure, not a single doubt. Placement is up to you, but I would probably put it in one of the lower corners
what intake and bov setup do you have?
I love the rear lower banner idea.
Once the truck has wheels and tires, I think a sideways windshield sticker like some of the ones from Custom Offsets would look really nice on it!
what intake do you have on it?
love your content and how awesome it is its just perfect love it and the fast uploads
I've got the windshield banner on the rear window of my XJ, would look dope on the rear of the truck!
Yessssss been waiting for this
Man Brad is sooooo lucky that fork didn’t come loose and go right into his new tires that would have sucked ! And as far as a banner on the truck maybe you should do just a smaller sticker in the drivers side bottom of the rear window ? Or a thinner banner at the top ?
I'm waiting for this!!❤🔥🔥🔥🔥🔥🔥
Low life for life ! 😍
Check and make sure the spare wheel well is ok with the Mazda. Those plastic bumpers can pull back into shape but the metal behind them can be damaged.
Why is the bov so loud? I dont recall Robbie doing anything with it.
Do 2 banners on the truck... right side on the windshield from bottom to top & left side of the rear window from top to bottom
You get that micheal Jordan tounge when you working that means you love what your doing
Genny is looking so much nicer!
There is a way to adjust that ark exhaust to sit higher. You need to modify the pipe the mufflers are connected to and it will raise the mufflers hogher
Damn that looks soo good!!!
back window banner on the trucks would look awesome imo
if you're putting a banner on the truck, DEFINITELY put it on the rear window
Put the banner on the rear on the truck !
Genny looks good man 👍
When painting that car u needed to address the Fluid Flow of the Gun plus the paint needs to atomize with the 2k Bascoat.And you need to get in the flow with a little more speed only 5 inches from spraying the panel still a good job but could have been better.
Every lotus has a dedion rear suspension arm. And they're some of the best handling cars in the world. It works very well and is easier to tune than most think.
Banner definitely needs to be on the back window! Thought that as soon as you picked it up! #CommittedCrew
I'm back lol cant wait to see this at then end
I think Emerson is on to something with the back window banner. Also less noticeable so people don’t mistake the 4x4 with a lowered street machine😂
Not sure how it is in Canada, but in UK you can get trade insurance that gives coverage on many vehicles for cheaper than insuring them as a personal vehicle, may be worth calling an insurance company and asking what options you have for a different policy to suit
Yo Robbie on a truck ur either supposed to do the banner on the back window or on the side of the windshield along the A pillar
Rear window sticker on the truck is a vibe
Cut out where you were gonna paint it black, build a rear bash bar and show off that dual exhaust! Would look sick!
He must've missed the "fork" in the road
He definitely didn't miss it
Car looks amazing bro
Looks awesome Robbie I’m currently doing the same to my e36 🤤🤤
100% robbie wont respond to my love. Been here since wish parts on the brz.
same. that grabbed so many subs prolly
The real boyos
Me too but it’s all good cause I’ve still loved watching all thus stuff happening for the channel 😎😎
Yea I feel but I mean it’s still good content. Remember when he had yellow lights on the brz.
Rear window committed crew banner on the truck would look really good
I would put the banner down the driver (or passenger) side of the car going from top to bottom:). Another reason to move to AZ I believe the tracks are opened last time I checked (and it’s sunny...ALL THE TIME **give or take a week**)
that car was tell in all the other cars to fork off 😂😂😂
Love the Speed3 they're so underrated as a car
I have the white window banner on the lower rear window of my pick up truck, and it really pops considering my truck is bright white and I think it's a very good location for it
do they not sell true coils for your car?
The z either have true coilovers or the adjustable springs
Bro, the genesis came out so clean😆😆 also I personally wouldn’t put a banner on the truck🤨
Used to have my first car Mk4 jetta and the rear suspension was just like that too
A larger banner on the back window would be dope
If you want to use the jenny for drifting then you need to set up the coilovers for performance and usability rather that fitment, which means raising the rear and having the correct preload setup (roughly 5mm)
Upper windshield banners on trucks look good I’ve had a couple on my trucks
Definitely on the back of the truck. It will look so clean
Top of the rear window 👌 will look so good on the truck!
ROBBIE! DO ANOTHER DESIGN OF THE COMMITTED CREW LOGO IN MORE "OFF-ROAD'y" STYLE AND IT WILL BE ON POINT FOR JEEPS, TRUCKS, SUV AND SO ON! UPVOTE PLEASE!
Yo Robbie, I get you. I daily a genesis on the east coast, and insurance is expensive as well. If you don’t have to insure it and can get it to the track and back, go for it !!
banner on the side of the truck would look dope!
The rear suspension is just like my 2009 Kia Optima, where the bolts are accessible from the wheel well and you don't have to open the car, that was nice when I had to replace the rear shocks!
I love your videos man! I've been watching since you got the BRZ and I remember I saw you driving in it as I live in Coquitlam too!! I recently got a Genesis Coupe 2.0T and I can't wait to mod it over the summer! Any tips?
Also you should definitely put the banner on the truck!
What if you paint the bumper in the back same as your wheels (the part you intend on colouring). Might go well with the rest of the car (you could maybe try colouring it in fotoshop and show the process before sending it, as like a cheaper option than sending it and than not liking it and changing it afterwords)
Do plate covers, or full commited crew plate, in NL a front plate is N/A and id like to have something there
Just get a day permit and take some back roads and spend the day dialing in the suspension. Also, you can wet sand and polish the crap out of that paint if you want to and make it super smooth, just keep away from the edges. (I work at the craftsman around the corner from you guys)
Always back for a truck #notificationgang
And about the insurance - If it stays inside the shop most of the time, it will be covered. right? If something sinister would happen? And since its a track car, insurance wont help either way.. So imo you made the right choice my guy. Keep it up
My mk6 gti has the same stupid rear suspension system, I don’t know why they did it like that.
Speed3 gang! 💨
It’s a Hyundai thing for the weird rear suspension and the no access from the trunk for the rear suspension. I found out the same thing when I bagged my 16 Veloster