30$ Nintendo Switch Lite Repair - Switch Lite Screen Replacement

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 24

  • @nickarganbright7218
    @nickarganbright7218 Год назад +1

    Well might be a bit late now, but since you have taken it apart 3 times already you could go all out, do a custom shell swap, put hall sensing joysticks on it so you would never have to worry about stick drift, maybe some custom buttons, and depending how the battery is maybe a new one. I just did all that to a switch lite last night, and aside from a stupid mistake that screwed up the front of the shell slightly it looks like a completely different switch and honestly amazing 😊 and with a new battery and joysticks that wont get drift it should last for years.

  • @pcsegurators630
    @pcsegurators630 Год назад +2

    Great repair tutorial! your video was really informative. Keep it up!

  • @RaidZeroSF
    @RaidZeroSF Год назад +2

    Love your videos, background music is great.

  • @tahmideditzps
    @tahmideditzps Год назад +2

    you are doing very well , hope your channel goes at great place wtih a big amount of subs ! I was searching this type of vids and stumbled at your channel I liked your 'macbook vids' very much hope you'll bring more of this type of vids.

    • @crimsontechyt
      @crimsontechyt  Год назад

      Thanks very much, that means alot :)
      I'm trying all sorts of things currently, but I'll def keep going with these. Glad i could help!

  • @jayjayhooksch1
    @jayjayhooksch1 6 месяцев назад +1

    Do you have to use an adhesive to stick the digitizer to the LCD? Or does it just sit in place?
    I know the digitizer needs adhesive to stick to the shell, but can't find any info about securing the LCD to the digitizer.

    • @crimsontechyt
      @crimsontechyt  6 месяцев назад

      It moves around a *tiny* bit, but i dont think it really matters. Unless you have a piece of dust in there that could scratch the screen, it should be fine

    • @jayjayhooksch1
      @jayjayhooksch1 6 месяцев назад +1

      ​@@crimsontechytit moves around a tiny bit during assembly? Or it moves around a tiny bit post-assembly? Like once it's put back together, is the LCD moving around inside?
      I'm doing this repair tomorrow. I have some adhesive strips, just not sure if I'm supposed to use it just on the digitizer to the shell, or also on the digitizer to the LCD.

    • @crimsontechyt
      @crimsontechyt  6 месяцев назад

      Oh sorry i misunderstood you. The digitizer needs stick to the plastic divider between it and the LCD of the switch, otherwise it will just fall out.
      The LCD display and backlight should already be glued together (hopefully)

    • @jayjayhooksch1
      @jayjayhooksch1 6 месяцев назад +1

      @@crimsontechyt thanks!

  • @SatchPatch25
    @SatchPatch25 Год назад +1

    Did you remove the old and add fresh thermal paste?

  • @flytie3861
    @flytie3861 8 месяцев назад +1

    I also got mine but for $60 the ony issue is the screen got lines, seller said they turn off after a heavy session and got a screen for $30

  • @nightwolf9596
    @nightwolf9596 6 месяцев назад +1

    can I only replace the glass without breaking the matrix?

    • @crimsontechyt
      @crimsontechyt  6 месяцев назад

      You can, but it's very. VERY hard. I'd buy a glass just in case

  • @kita0918
    @kita0918 Год назад +1

    I thoroughly enjoyed this video. 🤣🤣🤣

  • @upfunds
    @upfunds Год назад +1

    Keep up the good work!

  • @xxjashaxx
    @xxjashaxx Год назад +1

    great video. thank you

  • @crckrbrrs
    @crckrbrrs Год назад +1

    where do you GET these beautiful pieces of hardware for so cheap? im jealous

  • @dylanhatcher9604
    @dylanhatcher9604 8 месяцев назад +1

    Meme haha

  • @ruthauslander51
    @ruthauslander51 Год назад +1

    😍 "Promo sm"