An ungrateful shredder which does not work part 3
HTML-код
- Опубликовано: 15 июл 2024
- If you like the content I publish, you can support the channel. Thank you
tipply.pl/u/szymonhawlicki
PayPal szymonhawlick@gmail.com
Thank you to anonymous and named people for supporting the channel 😁
Video and fundraiser for @Kenny88
• Pożar - Potrzebna pomoc
Links to materials used in the video:
By using affiliate links you support the channel, thank you.
Microphone 🎙️ SYNCO G1 alii.pub/6mq47k
In this series of episodes... it was not possible to solve the issue immediately and more episodes will be created 🤣 repair of a wood shredder.
The shredder failed and I don't know under what circumstances or what exactly happened. So diagnostics is difficult, and repair attempts have already been made, which does not make it easier to determine the extent of damage and the primary source of the failure. But maybe it won't be so bad? 😎
However, during the test something was revealed about the device, namely that there must be something wrong with the electrical control panel. Fortunately, I don't have to bother opening the entire device 😁
Part 1 - for those who want to know where it started 😜
Why doesn't the shredder work? Let's take it apart and see 😎 Part 1
• Dlaczego nie działa ni...
Part 2 - first tests and measurements
Why doesn't the shredder work? We'll take it apart and see. Part 2
• Dlaczego nie działa ni...
After the first attempt, unfortunately, the device did not give the expected results, in reverse it works "correctly", only in forward gear, when it is supposed to pull the commutator into the shredder, the commutator sparks terribly, so I decided to check if there is something loose in the cables and whether the switch is not damaged, usually the first thing When something breaks, it's the mechanical moving parts.
Timeline:
0:00 - 1:38 Introduction
1:39 - 2:52 Initial assessment
2:53 - 5:50 Disassembling the rocker switch
5:51 - 7:30 Disassembling the rocker switch into its first parts
7:31 - 10:37 Switch status assessment
Current episode made with:
Synco - G1L - microphone
iPhone 8 - Audio and video
Assembly - iPad 9
Thank you very much @Kenny88 for creating a trailer for my channel 💪 - Наука
Opowieść wigilijna😆😀
Bardziej nie kończąca się historia jak narazie 🤣
Albo „kruszarka sama w domu” 🤪
@@SzymonHawlicki a za jakiś czas "kruszarka w nowym worku"🤣😅
Nie no szybciej wróci do kumpla i zostanie „zdawcowana” 🤣
Zapewne by kupił by drugą taką samą i by miał jako części zamienne 🤪 tylko jeszcze nie wiadomo co się nadaje jako część zamienna 🤣
@@SzymonHawlicki urządzeń z tej półki raczej nie opłaca się przy grubszych awariach naprawiać. Części to jedno a czas poświęcony to drugie 😀 ale czasmi warto😁🤪
Wesołych Świąt 🎅