helpful video, i recently my xe2s always get reset every time i took off the battery, and when i see your video there is internal battery on the motherboard, is there any chance i can replace it with the new one? if it so whats type the battery did the camera use?
Amazing video thank you! Unfortunately my Xe-2 internal battery is dying so i have 4 seconds to change the main battery before all my settings default to factory. Do you know what internal battery does the Xe-2? Can't find any information. Thanks in advance!
10:17 can you suggest what kind of plastic+ adheseive stick on to the back of the LCD ? I tried to find it but dont know what that is, so replacing lcd is kind of difficult
thanks to your video the canon 1300D can change the shutter of mine, thanks, I was wondering if you can make a video about the NIKON D7100 a friend has that camera and it is damaged too
Brilliant! So, I have an XE1 that stopped turning on. Most of what Ive read says its probably the motherboard and after some basic trouble shooting I feel like it is. So I have 2 questions, first, is there a good place to buy aftermarket boards, and is it worth replacing because ive seen notes about the boards still needing to be calibrated by fuji after the install, and second between the xe1 and 2 is the disassembily about the same as whats shown here? Ive only ever seen one other disassembally of an xe1 and it wasnt as in depth as this.
Thank you, the video is great. My display started flickering today and now I wanted to see how to replace the display. It seems to be feasible for me. The only question I have is where do I get the adhesive sealing strips to glue the new display back in place?
AMAZING DUDE!...ONE QUESTION ...I HABE PROBLEMS WITH THEBACK SHUTER SPEED DIAL..I DOES NOT RESPONSE SOMETIMES.IT GOES WELL WHEN YOU PRESS IT TO MAKE ZOOM BUT IT DOES NOT GOES RIGHT WHEN YOU WANT TO CHANGE THE SHUTER SPEED .ANY SUGGEST?...THANKS SO MUCH
Thanks. This is a common problem with those dial wheels on Fuji’s. Not an easy way to fix either, the easy way is to replace the top circuit board… Another one would be to spray some electronic cleaner trough the wheel space and then moving the wheel back and forth for a minute or more but that’s nasty and doesn’t work every time…
Great video! One question. The 'battery latch' (the red/orange battery retaining clip} on my X-E2s is broken. Does the whole battery compartment need to be replaced as I don't think this clip is available seperately from Fuji. Thanks in advance for your reply.
sorry to bother you, but i've had an issue with 2 different fujifilm cameras (xe2 & xt1 ) , they stopped switching on , without any evident reasons. the only thing that comesi in my mind is that i've shooted some commercial pictures in a quite dusty ambient (marble workshop).there is any chanche to disassembly the camera and try to clean the power switch ? Many thanks in advance M.
Ciao Matteo 😉 Marble dust is very abrasive, if gets inside may create some damage. One thing that I noticed is that the switch power is quite sensible and tends to fail easily. The only way is to open up the camere and investigate, might need a microscope or a watch repair loupe to see in details the conditions. Not easy work to be honest, lots of steps to reach that point…
Hello sir, can you help me answer my question. Is it the same lcd screen XE2 X100T and X100F? I googling about the specs is the same lcd screen 3" 1040k dot. Because i try to replace my X100F lcd screen with XE2 lcd part replacement. Thank you for the answer sir
Hello! Very nice video! I just got a xe2 for 80$, everything works except evf, apperntly the camera bumped against something and the evf went black. Im thinking maybe check if cable has come loose first? Is there shortcuts to getting to the evf?
Hello, my xe4 turns on, but the lcd just lights up in black. When turned off again, the lcd stayes on. Only by removing the batterie it (of course) stops working. Do you have any idea what could be wrong? Thanks fpr your help! :)
It's enough to take the tree little screws off, you can see it at minute 54:14:00 I would highly recommend to work on an empty table and possibly completely clean room at least 30 minutes before you open up the sensor. Usually this operation require an extremely clean room, specifically made for this kind of work.
@@CameraRestore I took it to a local repair shop and it was the cmos battery. I paid a cmos battery that is the exact model installed. Bought from aliexpress
helpful video, i recently my xe2s always get reset every time i took off the battery, and when i see your video there is internal battery on the motherboard, is there any chance i can replace it with the new one? if it so
whats type the battery did the camera use?
my locking pin is stuck on my xt100, thanks for taking apart the x mount, i am confident now what to expect when i unscrew the thing.
Thanks!
Good luck with it. If you need any suggestion on that, just drop a message here.
My shutter blade already broken, if i remove the shutter blade
Is it possible to use electronic only?
Amazing video thank you! Unfortunately my Xe-2 internal battery is dying so i have 4 seconds to change the main battery before all my settings default to factory. Do you know what internal battery does the Xe-2? Can't find any information. Thanks in advance!
Did you ever find out?
@@sn0rbaard no, in the end i just returned it. it was already soo expensive for a 10 year camera, so it didnt make sense to keep it and open it up.
Would you be able to do and show button repair for the Fujifilm XQ2?
I'm sorry, but I do not have any experience with point and shot cameras...
10:17
can you suggest what kind of plastic+ adheseive stick on to the back of the LCD ?
I tried to find it but dont know what that is, so replacing lcd is kind of difficult
`thank you. great video, i used it to change the lcd....would have been a hassle without you
Hy, how did you stick again the first protection you have removed ? Sorry for my english 😊
If you means the leather, has a double tape and if you warm up and carefully remove it after will stick back without problem.
thanks to your video the canon 1300D can change the shutter of mine, thanks, I was wondering if you can make a video about the NIKON D7100 a friend has that camera and it is damaged too
Hi thanks, I have some other project that I'm working on, but I will consider the D7100 when available
Brilliant! So, I have an XE1 that stopped turning on. Most of what Ive read says its probably the motherboard and after some basic trouble shooting I feel like it is. So I have 2 questions, first, is there a good place to buy aftermarket boards, and is it worth replacing because ive seen notes about the boards still needing to be calibrated by fuji after the install, and second between the xe1 and 2 is the disassembily about the same as whats shown here? Ive only ever seen one other disassembally of an xe1 and it wasnt as in depth as this.
Best would be to get a second hand one, from another Xe1 basically, avoid Chinese ones, are crap.
Thank you, the video is great. My display started flickering today and now I wanted to see how to replace the display. It seems to be feasible for me. The only question I have is where do I get the adhesive sealing strips to glue the new display back in place?
You’re welcome, thanks.
If you’re interested, I have the LCD and usually I send it wit the needed adhesive.
AMAZING DUDE!...ONE QUESTION ...I HABE PROBLEMS WITH THEBACK SHUTER SPEED DIAL..I DOES NOT RESPONSE SOMETIMES.IT GOES WELL WHEN YOU PRESS IT TO MAKE ZOOM BUT IT DOES NOT GOES RIGHT WHEN YOU WANT TO CHANGE THE SHUTER SPEED .ANY SUGGEST?...THANKS SO MUCH
Thanks. This is a common problem with those dial wheels on Fuji’s. Not an easy way to fix either, the easy way is to replace the top circuit board… Another one would be to spray some electronic cleaner trough the wheel space and then moving the wheel back and forth for a minute or more but that’s nasty and doesn’t work every time…
is it common for the EVF to go bad ? only LCD working, EVF sensor works but no longer turns on
Not common issues but might happen.
Thank you for the amazing video. Just what I needed it! Do you have the replacement for the lcd screen by any chance?
Thanks, I might have it, drop me a mail at contact@camerarestore.co.uk
Great video! One question. The 'battery latch' (the red/orange battery retaining clip} on my X-E2s is broken. Does the whole battery compartment need to be replaced as I don't think this clip is available seperately from Fuji. Thanks in advance for your reply.
Thanks. Yes, you will need to replace the whole box. I have the part in stock, drop me a message at contact@camerarestore.co.uk if you're interested
sorry to bother you, but i've had an issue with 2 different fujifilm cameras (xe2 & xt1 ) , they stopped switching on , without any evident reasons. the only thing that comesi in my mind is that i've shooted some commercial pictures in a quite dusty ambient (marble workshop).there is any chanche to disassembly the camera and try to clean the power switch ? Many thanks in advance
M.
Ciao Matteo 😉
Marble dust is very abrasive, if gets inside may create some damage. One thing that I noticed is that the switch power is quite sensible and tends to fail easily. The only way is to open up the camere and investigate, might need a microscope or a watch repair loupe to see in details the conditions. Not easy work to be honest, lots of steps to reach that point…
Hello sir, can you help me answer my question. Is it the same lcd screen XE2 X100T and X100F? I googling about the specs is the same lcd screen 3" 1040k dot. Because i try to replace my X100F lcd screen with XE2 lcd part replacement. Thank you for the answer sir
Hello! Very nice video! I just got a xe2 for 80$, everything works except evf, apperntly the camera bumped against something and the evf went black. Im thinking maybe check if cable has come loose first? Is there shortcuts to getting to the evf?
Hi Robin, check your inbox.
@@CameraRestore I have that same problem, my X-E2 EVF doesn't work after in bumped into something - can you help me aswell?
@LeonidasGFX Hi, the guy above got the replacement from me. I should have another one on stock if you’re interested…
Hello, my xe4 turns on, but the lcd just lights up in black. When turned off again, the lcd stayes on. Only by removing the batterie it (of course) stops working. Do you have any idea what could be wrong? Thanks fpr your help! :)
Hey, did your camera had any kind of water contact? Looks like a motherboard fault…
@@CameraRestore Thank you for answering!
not that I know off... so it might be a total defect probably?
@@emanuelschi
Might be the case, a checkup could tell better what could be wrong.
To the right of your tweezers at 29:22. Is that the internal battery for holding settings? Is it possible to replace it?
Yes, that battery can be replaced. Need some basics in soldering iron.
@@CameraRestore awesome! do you know the battery model #?
@@yealevi2850 MS621FE
Is it possible to remplace the viewfinder without soldering?
Do you mean the 5 wires of the top that are soldered to the mainboard?
Is it possible to further disassemble the sensor module, to remove dust trapped between the sensor and the glass covering it?
It's enough to take the tree little screws off, you can see it at minute 54:14:00
I would highly recommend to work on an empty table and possibly completely clean room at least 30 minutes before you open up the sensor. Usually this operation require an extremely clean room, specifically made for this kind of work.
Can I replace the sensor of my X-E2s with the sensor of X-E2?
For what I knew, the e2s version is more software upgraded rather than hardware, but not 100% sure.
Does Fujifilm have a policy when End of Service occurs for all of their cameras?
Yes, once a model is discontinued. Service still may be provided based on replacement stock, but usually doesn't last much.
hey bro i want a video on canon 55-250 full tear down repair **
Rarely happens to service fujifilm lenses but if I get one I’ll do a video.
Hi. I hope you reply to this comment. May I know what capacitor does the XE2 have?
Hey, hope you sorted your problem, anyhow if not I can have a look
@@CameraRestore I took it to a local repair shop and it was the cmos battery. I paid a cmos battery that is the exact model installed. Bought from aliexpress