I installed a pipercross air filter on my bcb engine and it has made a massive improvement i will lock the ecg and hot air intake on mine aswell thanks for sharing i can definately see how this improves performance
Maybe,maybe I am wrong but i think that removing that tube is not good,because even if it "restricts" the air flow,the trumpet shaping actually accellerates the air going thru there so I think removing it is not good,maybe better 3D print a trumpet shape that fits the larger hole once you have removed the original "restricted" trumpet
To the filter housing, connect a plastic pipe and bring in outside air. You will gain some more power, because now your engine draws air from the engine compartment where the temperature is high. My engine draws from the outside and maybe that's why it uses less fuel😉
@@krzychu_8682 The exhaust manifold on the AZD is on the opposite side which is acceptable in terms of heating. It's not like on TDI one above the other ...
On my Bora 1.6 16V AZD, I removed the whole OEM Airbox! Then installed intake pipe from 1.6 FSI and Airbox from Diesel Engine... Believe ist or Not... the car speeds up at 3000/4000 rpm you will Not believe!
With that airbox you can use aluminum intake manifold from POLO (6N) GTI engine code AJV on AZD too, also from LUPO 1.4 101hp AFH. Great thing is in that case you can port aluminum intake manifold and throttle body a little bit. Together with larger diameter on exhaust pipe and removing cat maybe remap i think you can get 20-30 hp
Remove that stupid box install a cone filter behind the battery and no more powerloss and much more power the stock box is trash even when blocking exhaust heat the cover still gets hot so does the air which means performance loss on operating temperature
I installed a pipercross air filter on my bcb engine and it has made a massive improvement i will lock the ecg and hot air intake on mine aswell thanks for sharing i can definately see how this improves performance
Maybe,maybe I am wrong but i think that removing that tube is not good,because even if it "restricts" the air flow,the trumpet shaping actually accellerates the air going thru there so I think removing it is not good,maybe better 3D print a trumpet shape that fits the larger hole once you have removed the original "restricted" trumpet
great video, inside the airbox there is another piece that restrict air, that you can your take out with your hand
To the filter housing, connect a plastic pipe and bring in outside air. You will gain some more power, because now your engine draws air from the engine compartment where the temperature is high. My engine draws from the outside and maybe that's why it uses less fuel😉
I'll put soon whole new cold air intake with hidrolock protection and ported polo GTI 1.6 16v aluminum intake manifold, with ported throttle body...
The aluminum manifold will get a lot of heat from the engine. This is not a good idea.
@@krzychu_8682 The exhaust manifold on the AZD is on the opposite side which is acceptable in terms of heating. It's not like on TDI one above the other ...
I have the same airbox and thought of opening a hole on the opposite side of the one you unrestricted
Yes you can do that too...
On my Bora 1.6 16V AZD, I removed the whole OEM Airbox!
Then installed intake pipe from 1.6 FSI and
Airbox from Diesel Engine...
Believe ist or Not... the car speeds up at 3000/4000 rpm you will Not believe!
Interesting... fsi have flaps on intake manifold
@@Filip_13 no, my intake manifold and throttle Body is Stock.only „pipe“ from throttlebody to Airbox is from the fsi
With that airbox you can use aluminum intake manifold from POLO (6N) GTI engine code AJV on AZD too, also from LUPO 1.4 101hp AFH. Great thing is in that case you can port aluminum intake manifold and throttle body a little bit. Together with larger diameter on exhaust pipe and removing cat maybe remap i think you can get 20-30 hp
what did you do with the Carter ventilation hose?
@@compjoeter2517 I extended it to the Airbox
can i glue the inside plastic flap ?
can I just keep the function can I repair the operation of the valve? wan the mine always stay closed to warm air please hear it.thank you
The airbox is the opposite of an intercooler. It is getting so hot on top of the engine. Just not made for performance...
Remove that stupid box install a cone filter behind the battery and no more powerloss and much more power the stock box is trash even when blocking exhaust heat the cover still gets hot so does the air which means performance loss on operating temperature
My vehicle is golf mk4 1.6 16v bcb engine. Will my vehicle be damaged as a result of EGR cancellation?
No
@@Filip_13 What are the benefits?
@@grafikmedia27 Better performance, no more dirt on throttle body, map sensor and intake manifold...
Hi there! Do you have instagram to contact you about azd
I have a problem with my azd, when you ride a long time
do you feel a difference in power?
Yes, a little bit is better
i removed whole front pipe much better