Amazing setup. Can you give us some more detail about pedal setup. I was thinking this kind of setup for my bike but dont know how to make the pedal free wheel setup.
Is other video coming to show all the components and how are assembled. The interior part of freewheel has to be attached to the pedal (can be welded or holding with screws,many different ways)
Motor & controller = 48v 1800W/32ah DeWalt grinder head 7 1/2” Motor and grinder head I designed the way to connect one each other using a connector to joint the two axes. Chain is connected from the rear wheel to the motor gear then crossing the pedal going back to the rear, pedal has a freewheel on. Motor spin = rear wheel and freewheel on pedal spin(pedal don’t move) You pedal = motor(as much you pedal) and wheel spin
looks like a lot of weight on the handlebars and rather little chain contact with the drive sprocket, but i applaud your efforts
How do the pedals not move while the chain moves
Amazing setup. Can you give us some more detail about pedal setup. I was thinking this kind of setup for my bike but dont know how to make the pedal free wheel setup.
Is other video coming to show all the components and how are assembled.
The interior part of freewheel has to be attached to the pedal (can be welded or holding with screws,many different ways)
อยากเห็นขั้นตอนการทำครับ
this is so good man
Dobry pomysl z przekladnia kątowa. Mialem kiedys taki sam pomysł ale nie zrobilem tego hehe :)
did you build the 90 degrees adapter (differential / pinion gear) yourself or did you buy? looks really good!
I made the parts to connect motor and grinder head
Great one!
how amazing can you write down some specs, like motor, chain and pedal setup etc. looks reallly really good.
Motor & controller = 48v 1800W/32ah
DeWalt grinder head 7 1/2”
Motor and grinder head I designed the way to connect one each other using a connector to joint the two axes.
Chain is connected from the rear wheel to the motor gear then crossing the pedal going back to the rear, pedal has a freewheel on.
Motor spin = rear wheel and freewheel on pedal spin(pedal don’t move)
You pedal = motor(as much you pedal) and wheel spin
좋아요👍👍👍👍👍👍
แบบนี้ทำขายคันเท่าไรครับ
Och en ny sida kan😮😅😅😅😅 bara är en bra mix my
😅😅😢😢😮🎉😢😊
coloca um pack numa mochila !
how often would someone who weighs say 180 pounds or more need to buy a new makita battery tho lol?
Not idea, but 1 year using the same makita batteries, still giving the same results
👀
Not going to work you need two sprocket on the same side one for your pedal and the other for your motor
Works, so far so good
Wath is the drill now
Tesla bike 😂 can u try with water
What do you mean, try with water
@@nteslamind797 i mean durability , if electric bike on rain
I didn’t test that, some of the parts are no waterproof, but I run on wet streets and is fine, the problem my back get water😂 too
you are a farce, that bicycle does not even reach 400 Watts.
It’s not full throttle