I bricked my machine yesterday, managed to rollback, then today found your video... I had NO IDEA there was a micro-sd slot in the screen, i wasn't bricked at all, Creality really dropping the ball in terms of support. Awesome explanation, will buy smaller size sd cards and give this method a try but I see no reason why it wouldn't work now that you've explained it well. Thank you! Awesome channel, and it's weird there's almost nobody showing this stuff properly. Immediately subbed.
Glad the video helped. I did not know about the micro-SD card either, and there wasn't any video I could find. Thanks to some one posting it on Reddit that pointed me into the right direction.
You should really show on camera what you are actually doing and clicking on for those of us that haven't done this before. You point or put the camera down at key points making us guess as to what you're actually doing, defeating the purpose of the video, like with the "DWIN_SET" and "DWIN_SET". Do you just copy it to the TF card twice? Also, the 3.1.9 firmware....is that just for the motherboard? I got lost somewhere between the display and motherboard and then the 3.1.9 working over the 3.2? Lol I appreciate your video, Im just unsure of which to do over the other.
Great video, however I cannot get the firmware to update on the machine. The screen updates, but after that I cannot get to the screen that lets you select English. It just shows the random coordinates at the bottom. Any advice?
@@xXTimEproductionsXx If the screen is not showing everything properly and you are only able to see the numbers, the update did not complete successfully. I had the same issue initially, so I reverted to the old screen firmware and then updated to the newer one. Also, for some reason, you have to upgrade in order of the release. So if you have 3.0.4 initially, upgrade to 3.1.9, and then to 3.2.0. or the update will fail. Hope this helps.
Hi, I have a doubt, after placing the micro with the boot.bin and turning it off the next time it turned the printer on the screen didn't wake. Is there a chance you know what probably happened?
Make sure your micro SD card is under 8GB, and also formatted to FAT32 with allocation size set to 4096 bytes before you insert it in to the Micro SD Card slot of the screen, or the system will not recognize it. If you already have done all that, make sure the cable is connected properly and is not loose at the connector. Give these a shot and let me know if that works out. I did not have that issue though.
all wen t well to a certain point after the screen update had finished and i moved on to the step to use the standard sd card in the machine the screen is sat on the creality logo with the temps down the bottom but nothing els any ideas ?
@@joshreddington3195 if your screen is not showing everything correctly, more than likely your screen update failed. I had the same issue initially, I reverted to the older firmware and tried updating it from there and that worked. Hope this helps.
Easy fix. Forward the video to 7:40, and I covered that error. Are you trying to install the 3.2.0 firmware? I got the same error when I tried to install the screen update that is bundled with the 3.2.0 firmware. Go with the screen update that is bundled with 3.1.9 firmware and you will be good to go. Took me a while to sort out that error myself. Hope this helps.
As far as my understanding goes, yes. I tried to run it without updating the screen firmware, my screen started acting all weird, and was stuck on the initial art and with some random words here and there on it. So I will say, update the screen as well, just to play it safe.
@@andrewgarland9981 When your screen turns on, do you see the initial animation? and then it just shows random number on the bottom? for the X and Y settings?
tried this a while ago and failed, cant wait to try it again now i have seen this, thank you.. can you add a link to the files in the description, it will help others and make this tutorial the best.
Here is the link to the firmware off Creality website:
www.creality.com/pages/download-ender-3-s1
Thank you!!! You saved my life and my printer. Would love to see more tutorials from you.
Again thank you
@@thashlinnaidoo6450 you are welcome man. Glad the video helped.
I bricked my machine yesterday, managed to rollback, then today found your video...
I had NO IDEA there was a micro-sd slot in the screen, i wasn't bricked at all, Creality really dropping the ball in terms of support.
Awesome explanation, will buy smaller size sd cards and give this method a try but I see no reason why it wouldn't work now that you've explained it well.
Thank you!
Awesome channel, and it's weird there's almost nobody showing this stuff properly.
Immediately subbed.
Glad the video helped. I did not know about the micro-SD card either, and there wasn't any video I could find. Thanks to some one posting it on Reddit that pointed me into the right direction.
Although a simple tutorial, it helped me a lot, thanks.
Glad to help man.
I would've never figured this out without this tutorial. Thank you!
@@Mondongaso you are welcome, bud.
Ive spent hours try to do this and this was literally the best tutorial i could find.
Glad to help, buddy.
You should really show on camera what you are actually doing and clicking on for those of us that haven't done this before. You point or put the camera down at key points making us guess as to what you're actually doing, defeating the purpose of the video, like with the "DWIN_SET" and "DWIN_SET". Do you just copy it to the TF card twice? Also, the 3.1.9 firmware....is that just for the motherboard? I got lost somewhere between the display and motherboard and then the 3.1.9 working over the 3.2? Lol I appreciate your video, Im just unsure of which to do over the other.
Well.. Thank you!! I've been doing it wrong this whole time lol no wonder.. I didn't think the need to remove the screen.
@@Steamy_Dumpling you are welcome, bud.
Great video, however I cannot get the firmware to update on the machine. The screen updates, but after that I cannot get to the screen that lets you select English. It just shows the random coordinates at the bottom. Any advice?
@@xXTimEproductionsXx If the screen is not showing everything properly and you are only able to see the numbers, the update did not complete successfully. I had the same issue initially, so I reverted to the old screen firmware and then updated to the newer one. Also, for some reason, you have to upgrade in order of the release. So if you have 3.0.4 initially, upgrade to 3.1.9, and then to 3.2.0. or the update will fail.
Hope this helps.
@@imrakhan Thank you! I managed to revert to the previous firmware. I guess my unit cannot support the latest update.
Hi, I have a doubt, after placing the micro with the boot.bin and turning it off the next time it turned the printer on the screen didn't wake. Is there a chance you know what probably happened?
Make sure your micro SD card is under 8GB, and also formatted to FAT32 with allocation size set to 4096 bytes before you insert it in to the Micro SD Card slot of the screen, or the system will not recognize it. If you already have done all that, make sure the cable is connected properly and is not loose at the connector. Give these a shot and let me know if that works out. I did not have that issue though.
all wen t well to a certain point after the screen update had finished and i moved on to the step to use the standard sd card in the machine the screen is sat on the creality logo with the temps down the bottom but nothing els any ideas ?
@@joshreddington3195 if your screen is not showing everything correctly, more than likely your screen update failed. I had the same issue initially, I reverted to the older firmware and tried updating it from there and that worked. Hope this helps.
If you could make a tutorial about what to do when my z offset won't go low enough I would really appreciate it. Because that is my newest problem
Hopefully soon. I am having the same issue. Haven't print anything for a little while, but need to do some research about the z offset issue.
Same here I've always had first layer issues on this machine
Hello friend, in my case during the update, said that private was so big "more than 1mb" then the display bricked. Whats coul I do? Thanks
Easy fix. Forward the video to 7:40, and I covered that error. Are you trying to install the 3.2.0 firmware? I got the same error when I tried to install the screen update that is bundled with the 3.2.0 firmware. Go with the screen update that is bundled with 3.1.9 firmware and you will be good to go. Took me a while to sort out that error myself. Hope this helps.
@@imrakhan exactly my friend, I did it, istalled the 3.1.9 display firmware and that worked, and the motherboard to 3.2, any problem?
Awesome!
I am running the 3.2.0 on the main board for a few weeks now, no issues at all. Just printed something over the weekend without any issues.
@@imrakhan thanks for the help my friend!!
Porém, acredito que não carrega corretamente os 9 idiomas. Essa é uma falha que percebi. Mas dentro do que eu uso, o resto está normal.
helo sir , can`t update Display firmware 3.2.0
any solution
hello. Are you receiving any error?
Do you have to update the screen to update the firmware?
As far as my understanding goes, yes. I tried to run it without updating the screen firmware, my screen started acting all weird, and was stuck on the initial art and with some random words here and there on it. So I will say, update the screen as well, just to play it safe.
My screen turns on but it doesn't load up so I can't use my printer have checked my motherboard and it is a F1 does that matter
@@andrewgarland9981 When your screen turns on, do you see the initial animation? and then it just shows random number on the bottom? for the X and Y settings?
tried this a while ago and failed, cant wait to try it again now i have seen this, thank you..
can you add a link to the files in the description, it will help others and make this tutorial the
best.
You are welcome, bud.
Here is the link to the firmware update:
www.creality.com/pages/download-ender-3-s1
Best of luck man.