you see tutorials problem is that they show you solution but not the principle. It's like creating fire in the jungle, one can do that with sticks another one can't do that with lighter. If you want to do something first you need to understand how it works after that you can make like rocket engine from an old car turbine.
@@thokozanigwathi4249 Based on the presentation, it will really works because of the chemical component of plastic that has been filtered out by using a closed air container and a higher temperature level to melt down those plastics and making an output pipe to gather those chemical components from inside b y trapping it with water. It is called plastic pyrolysis. Plastic is very known to be much flammable and those component or element is taken out from that plastic to make it like liquid instead of a solid.
@@thokozanigwathi4249 Actually I think this should be workable project, because there was some day I was just melting some plastics around in the steel dish with higher temperature fire from the coal so I can get some mould, the dish was covered at the top and as result once I opened the the dish the fire from outside went in and there was a huge explosion as if there was some extra flammable fuel poured into that dish, then I come across this project and I learn something from what happened to me the other time
@@thokozanigwathi4249 Actually I think this should be workable project, because there was some day I was just melting some plastics around in the steel dish with higher temperature fire from the coal so I can get some mould, I went far and boil them to the extent they turned to be a fluid, the dish was covered at the top and as result once I opened the dish the fire from outside went in and there was a huge explosion as if there was some extra flammable fuel poured into that dish, then I come across this project and I learn something from what happened to me the other time
This process is known as plastic pyrolysis ( breakdown of plastic molecules producing oil, gas, some traces of ash) which is done in absence of oxygen at high 🌡️temperatures
@@Albert-gv2px This is a mixture, Its petrol, diesel, and syn gas. sometimes kerosene is found. You need to process this further using distillation or any other separation method.
¿Que características tiene el combustible obtenido? ¿Es gasoil, kerosene o gasolina? ¿Es apto para carburador o inyección? ¿octanaje? ¿Punto de detonación? ¿Energía por unidad de volumen? Sin saber feacientemente estos parámetros fisico-químicos no es posible determinar si es bueno para vehículos o únicamente para estufas.
Todo depende de el enfriamiento que se le dé,ahí está muy resumido y rudimentario me imagino que puede ser kerosene lo que el consiguió. Si miras otros vídeos verás que depende de la calidad de los plásticos el enfriamiento ,y la temperatura a la cual es sometida
Чушь, после пиролиза пластика "жижа" имеет вид глиняной болтушки, а не родниковой воды, так как даже пиролиз прозрачного оргстекла даёт метилкрилат цвета мочи после ведра пива
Interesante, en el fondo estás cambiando la forma física de un combustible fósil, habría que estudiar el rendimiento calórico de ambas formas para determinar si hay ganancia o pérdida de energía Una sugerencia, no utilizar un codo en el tubo de salida del estanque, pues acerca la cañería plástica al fuego
You do realise every plant on earth uses co2? CO2 emissions is a scam. The only carbon they want to lower is the population. Think about it, research it and stop regurgitating what you hear on the tv. Peace x
Yes but think of the waste that may be laying around in certain regions of the world, wouldn't it be better to use it up as a source of fuel that is affordable/accessable to those who may not have the privilege of having it? what an inovative method for those who it could be essential or important to, perhaps maybe life-changing even!
Хитрый ролик! Шланг очень близко к огню, 45 минут такого жара он не должен выдержать. Жидкость очень сильно прозрачная. Нет весов загрузки реторты. Нет отчета выхода жидкости, хотя на пластике его не много бывает. И ещё газ попутный просто испаряется … вопрос: вы хотите делать бизнес или это хобби?
La verdad, que del plástico sale combustible, pero no como el dueño del video dice, viola todos los parámetros de seguridad, su proceso es una mentira, 100%, por todos lado es mentira, el sello que usa, el seguro que le pone, para mantener la tapa cerrada, las mangueras que usa, los depósitos, para recibir la materia de pirolisis, todo eso se quemaria si pasa por ahí el material caliente y la cantidad que saca, y ya destilada, etc.
hai ragione, molto pericoloso,una cosa che ho' osservato, è un spreco nell'alimentare il fuoco, su' queste cose io non gioco, parliamo di sicurezza, io onestamente , sé mai vorrei provare, molti lavaggi , nella bombola, e il taglio,nella stessa , ho' paura, certo che provo paura, altri commenti , dopo, ciao,
Still not environmental friendly, burning fuel to create another fuel is just a waste of energy. And the waste product cause another environmental issue.
What is the name of the material he uses to block the gaps that don't get burned when heating. That sticky thing he uses to block the gaps after cutting. Please name it.
Boa tarde amigo eu me chamo uvilson e sou Brasileiro e gostaria de mais conteúdo teu dos desses de como fazer destiladores caseiros para fazer gasolina caseira muito bom o seu video❤
اولا شلنگ که برای اینکار باید استفاده صه جنسش باید مس باشه تا نسوزه اما شلنگ آب میشود دوما پلاستیک بعد سوختن به دود تبدیل میشه نه بخار سوما یه کاسه زیر نیم کاسیت
How can you be serious with that PVC hose right on the pyrolysis reactor, the poor seal, and the using of PET feedstock. This wont work like this, people.
Amazes me , people around the world using wd40 believing it’s special ! Nothing special I experience. But paying around$4.00. To much . I buy gallon of diesel instead and spray over rusted bolts.
Con este tipo de botellas se puede hacer calderas de vapor Pero con cuidado si pued ser con más grosor de paret mejor Y con válvulas de bola para vaciado rápido
looks like clear heavy duty PVC hose with a jubilee clip. I would add that whilst i dont doubt the process of turning plastic to fuel, i do doubt the videos authenticity. The cuts are a bit magician esk. why not camera pan or speed up the speed of the whole apparatus in action? If the input data is incomplete, so likely is the outcome.
That type of plastic won’t produce that product. You need hdpe not pet. Pet will produce nothing but bad gases and sulfur residue. Without the correct filters, even with hdpe, you’ll get something but not that clean. You need to filter each stage in line to get quality diesel, kerosene and gasoline.
Lucky is right let's not just focus on the boom or the fact that it was an inflamed liquid but rather the quality. No vehicle would last a week with this kind of product.You can try yours and see
@@christopherbagde9540 ,Now a days in Sri lanka,garbage of plastic products become a burden.Very unfotunately our people of Sri Lanka,throw the plastic hear & there. That's why I told that" it helps to protect enviornment" And the other hand stil we do not herd out of these bottels,can made yarn fiber and tiles.-by products use for repair the patches of the road. And we haven't technics for the same.So thank you very much for your kind concideration. Finally I can mention that Sri Lanka face a fual problem too.Now a days filling stations limited to issue the fual to the vehicles.
I ´ve tried many times with a better equipment to do the same and zero result, but you are doing a great job with less equipment..congrats..
you see tutorials problem is that they show you solution but not the principle. It's like creating fire in the jungle, one can do that with sticks another one can't do that with lighter. If you want to do something first you need to understand how it works after that you can make like rocket engine from an old car turbine.
So it didn't work for u? I wana try it out so I am curious about what happen to you trying it out
@@thokozanigwathi4249 Based on the presentation, it will really works because of the chemical component of plastic that has been filtered out by using a closed air container and a higher temperature level to melt down those plastics and making an output pipe to gather those chemical components from inside b y trapping it with water. It is called plastic pyrolysis. Plastic is very known to be much flammable and those component or element is taken out from that plastic to make it like liquid instead of a solid.
@@thokozanigwathi4249 Actually I think this should be workable project, because there was some day I was just melting some plastics around in the steel dish with higher temperature fire from the coal so I can get some mould, the dish was covered at the top and as result once I opened the the dish the fire from outside went in and there was a huge explosion as if there was some extra flammable fuel poured into that dish, then I come across this project and I learn something from what happened to me the other time
@@thokozanigwathi4249 Actually I think this should be workable project, because there was some day I was just melting some plastics around in the steel dish with higher temperature fire from the coal so I can get some mould, I went far and boil them to the extent they turned to be a fluid, the dish was covered at the top and as result once I opened the dish the fire from outside went in and there was a huge explosion as if there was some extra flammable fuel poured into that dish, then I come across this project and I learn something from what happened to me the other time
This process is known as plastic pyrolysis ( breakdown of plastic molecules producing oil, gas, some traces of ash) which is done in absence of oxygen at high 🌡️temperatures
Is the fuel in the video unleaded petrol? Or biodiesel? Or something else?
@@Albert-gv2px śb
@@Albert-gv2px This is a mixture, Its petrol, diesel, and syn gas. sometimes kerosene is found. You need to process this further using distillation or any other separation method.
@@thulilerankwemoroka2923 what about wax formation
อันตรายมาก ต้องมีน้ำกันแก๊สระเบิด หินเจีย ไม่มีกาดบังเกิดอุบัติเหตุได้ง่ายมาก ช่างชาวบ้านส่วนมากเป็นแบบนี้
Please explain... What is the gas in burning plastic?
Diesel crude oil
Formula one fuel.....
इसमें बेस्ट धुवा निकल रहा है उसे भी ब्लॉग बनाये जाते है ताकी इन्व्हरमेंट को भी नुकसान है
¿Que características tiene el combustible obtenido? ¿Es gasoil, kerosene o gasolina? ¿Es apto para carburador o inyección? ¿octanaje? ¿Punto de detonación? ¿Energía por unidad de volumen? Sin saber feacientemente estos parámetros fisico-químicos no es posible determinar si es bueno para vehículos o únicamente para estufas.
Todo depende de el enfriamiento que se le dé,ahí está muy resumido y rudimentario me imagino que puede ser kerosene lo que el consiguió.
Si miras otros vídeos verás que depende de la calidad de los plásticos el enfriamiento ,y la temperatura a la cual es sometida
Es efectivo? Da buenos resultados? Alguien sabe...
Here ,PET bottles are added to reactor. But oil cant be generated out of pet bottles ?
It works it produce black diesel patrol and gas but but It doesn't produce refined patrol. So it's very fake video.
Nice job
Чушь, после пиролиза пластика "жижа" имеет вид глиняной болтушки, а не родниковой воды, так как даже пиролиз прозрачного оргстекла даёт метилкрилат цвета мочи после ведра пива
nice
Do it work on all plactic?
Great Brow 🙏😎💪❤️
dengan uap plastik yang panas apakah tidak merusak toples plastik??
the jar is placed in water pan
❤❤❤❤❤❤❤❤❤❤
Explain us.
Interesante, en el fondo estás cambiando la forma física de un combustible fósil, habría que estudiar el rendimiento calórico de ambas formas para determinar si hay ganancia o pérdida de energía
Una sugerencia, no utilizar un codo en el tubo de salida del estanque, pues acerca la cañería plástica al fuego
no sucedera, se hace en ausencia del oxigeno...
@@calloscar1948 pero con semejante llamas puede quemarla y ahí si.
Mejor usar una válvula antiretorno
And add even more carbon dioxide to earth...!!!! 🔥🔥🔥
You do realise every plant on earth uses co2? CO2 emissions is a scam. The only carbon they want to lower is the population. Think about it, research it and stop regurgitating what you hear on the tv. Peace x
😱
Which kind of plastic
But think about the pollution created by burning the cylinder
Yes but think of the waste that may be laying around in certain regions of the world, wouldn't it be better to use it up as a source of fuel that is affordable/accessable to those who may not have the privilege of having it? what an inovative method for those who it could be essential or important to, perhaps maybe life-changing even!
Pppp
Burning the cylinder causes no pollution, burning plastics does.
Nope
Fake
fake
I just want to see the comments... From the experts with their critics
Хитрый ролик! Шланг очень близко к огню, 45 минут такого жара он не должен выдержать. Жидкость очень сильно прозрачная. Нет весов загрузки реторты. Нет отчета выхода жидкости, хотя на пластике его не много бывает. И ещё газ попутный просто испаряется … вопрос: вы хотите делать бизнес или это хобби?
what is the name of that paste u used to seal the cylinder?
i want to give a try!
@@lukyamuzigeofrey3169 epoxy
@@lukyamuzigeofrey3169 0
La verdad, que del plástico sale combustible, pero no como el dueño del video dice, viola todos los parámetros de seguridad, su proceso es una mentira, 100%, por todos lado es mentira, el sello que usa, el seguro que le pone, para mantener la tapa cerrada, las mangueras que usa, los depósitos, para recibir la materia de pirolisis, todo eso se quemaria si pasa por ahí el material caliente y la cantidad que saca, y ya destilada, etc.
Excelente punto, interesante como la harías tú? Gracias
hai ragione, molto pericoloso,una cosa che ho' osservato, è un spreco nell'alimentare il fuoco, su' queste cose io non gioco, parliamo di sicurezza, io onestamente , sé mai vorrei provare, molti lavaggi , nella bombola, e il taglio,nella stessa , ho' paura, certo che provo paura, altri commenti , dopo, ciao,
signori non provate,per carità, ma' di che cosa mi devo preoccupare, in quello non per me, ma' per voi , ciao,
lo vedo giovane, è lunga là storia,waleriams031, poi cosa vi è in seguito,per il momento ,non lo' comprendo, ciao,
why u wast ur time in india ॰Go USA and join NASA😁😁😁
Love this. . . I must have a bigger production plant. Waste plastic is all over
limbah minyak goreng masih banyak sir
It's nice of you to listen to the suggestions of the people in your previous video.
Wastage of energy basically producing energy....
මෙහෙ ගෑසුත් නෑ😂
😁😁😁
Thanks sir for the time and effort you put to demonstrate the best idea, really helpful and broadening my mind of creativity and innovation ❤
Still not environmental friendly, burning fuel to create another fuel is just a waste of energy. And the waste product cause another environmental issue.
I make that in year 1979 in the camp
What is the name of the material he uses to block the gaps that don't get burned when heating. That sticky thing he uses to block the gaps after cutting.
Please name it.
Boa tarde amigo eu me chamo uvilson e sou Brasileiro e gostaria de mais conteúdo teu dos desses de como fazer destiladores caseiros para fazer gasolina caseira muito bom o seu video❤
اولا شلنگ که برای اینکار باید استفاده صه جنسش باید مس باشه تا نسوزه اما شلنگ آب میشود دوما پلاستیک بعد سوختن به دود تبدیل میشه نه بخار سوما یه کاسه زیر نیم کاسیت
Medyo lugi dahil marami ang naubos na iginatong na kahoy, kakaunti naman ang nakuhang kailangan.
Bad project
আসসালামু আলাইকুম ভাই কেমন আছেন।ভাই আমি আপনার সাথে কিছু কথা বলতে চাই আপনার নাম্বারটি দেওয়া যাবে
What is the white one, brother, to glue the lid so that it is tight
How can you be serious with that PVC hose right on the pyrolysis reactor, the poor seal, and the using of PET feedstock. This wont work like this, people.
yes fake video. no result with PET.
@@Kolngodacentral0715 what do you mean it don't ork??? you just seen it work with your very own eyes!!!! lol
what a cheater boy 🤣🤣 pet doesn't make oil
Amazes me , people around the world using wd40 believing it’s special ! Nothing special I experience. But paying around$4.00. To much . I buy gallon of diesel instead and spray over rusted bolts.
Con este tipo de botellas se puede hacer calderas de vapor
Pero con cuidado si pued ser con más grosor de paret mejor
Y con válvulas de bola para vaciado rápido
Why edit the last part tho🤔
will be good for road warrior times hehehe
i hope people know there is no fuel shortage. other things are involved to getting it.
Egy jó kérdés: miért nem használtad fel a gázt egy gázégővel a végén hogy tovább tudd melegíteni a pet palackokat?
That’s (thermal degradations of polymer) which is mean convert the ploymers to it’s monomers✅
It’s not produce fuel from plastics ❌
why do you add water to the other container?
filter the gas from harmful material,but it's not sure
@@andrasubori6886 its in the wrong place to filter the gas
Let's put the comments as the judges for this project
Replacing plastic with wood
useful substances are produced😅
what kind of plastic pipe is that? what is the name of the screw that is used to tighten the iron pipe and plastic pipe ?
anyone please help
looks like clear heavy duty PVC hose with a jubilee clip. I would add that whilst i dont doubt the process of turning plastic to fuel, i do doubt the videos authenticity. The cuts are a bit magician esk. why not camera pan or speed up the speed of the whole apparatus in action? If the input data is incomplete, so likely is the outcome.
Why did not put water in the first vessel? Also, why put water in another vessel? explain please 🙏
You ain't gonna live for too long if you keep on doing this kinda dangerous experiments without the proper equipment...
Small drop but very wide flames it's fake
Camera zooming in. We have the same suspicion at first but later found out why.
Yes, but how well does thst stuff work in a gasoline powered generator or a chain saw??
Great work sir
But with what did you glue the bottle to prevent air passage
how come this one came out lighter color than previous one?
But the container had a liquid before you started the fire?
Why waste ' real fire to get ...plastic fuel' toxic waste ' tons of carbon
Why PET bottles?
Making fool innocent, this endian is cliver.
Free ideas.expanding
That type of plastic won’t produce that product. You need hdpe not pet. Pet will produce nothing but bad gases and sulfur residue. Without the correct filters, even with hdpe, you’ll get something but not that clean. You need to filter each stage in line to get quality diesel, kerosene and gasoline.
Can you tell me then how he produced the diesel?
More than likely he had that plastic mixed with proper plastics. Yield would’ve been better if he had left it out.
@@cuttiepie2584 i think it was just dumped into the tank to boil out.
But look, it did burn on the floor at the end of the clip.
Lucky is right let's not just focus on the boom or the fact that it was an inflamed liquid but rather the quality. No vehicle would last a week with this kind of product.You can try yours and see
#oilCrudeU1 #petroilU1 #oilPlasticU1
Good job
My first run got flammable jelly. Lol
Made a little flame thrower. So I know the break down is turning into something flammable. This is a fun project.
Can I put it in my diesel car as fuel ?
very interesting but we want to see, to know what happens to the plastic in the iron barrel.
Saludos profesor el segundo envase con agua dentro es para eliminar los gases tóxicos restantes O me equivoco
วัสดุที่ใช้อุดข้อต่อ รอยรั่วของถังแก็สคืออะไร
What's that white thing u put on cylinder looking like gum
Parabéns pelo vídeo simples e top.
thank you man! crack!!! thanks thanks thanks
Hard work & creativity
الحطب دي تحتها بايطبخ ثور هههه
i need urgent that system for me
Nice idea.It helps to protect the enviornment from the garbage disposals and gives a solution for the fuel requirments.
@@christopherbagde9540 ,Now a days in Sri lanka,garbage of plastic products become a burden.Very unfotunately our people of Sri Lanka,throw the plastic hear & there.
That's why I told that" it helps to protect enviornment"
And the other hand stil we do not herd out of these bottels,can made yarn fiber and tiles.-by products use for repair the patches of the road.
And we haven't technics for the same.So thank you very much for your kind concideration.
Finally I can mention that Sri Lanka face a fual problem too.Now a days filling stations limited to issue the fual to the vehicles.
@@naturesproducts-srilanka6736 Ditto. ;)
Good phly rs 200 ki fire lagao aur rs 100 ka petrol banao 🙈
¿Que cosa es eso blanco con lo que sella la bonbona.?
What are they sealing it with looks like bread
👍🏻👍🏻
ok, now fill something with that thing.
Use fly ash... catalyst jaldi ho jayega
Salam perdamaian ☮️ dari Leo gorpongko
Hola amigo Ami me sale solo vapor y no sé convierte en líquido porque será 😢 gracias por su información
No funciona?
Fack
🙏👍
Good Job bro! Can you use it on a Motorcycle or a car?
This is the most accurate prophesy so far
what did you make the gasket from ?
Est ce que ça marche avec un moto
Waw !!! I couldn't never expect it.
Good job, I wish you success
Please explain what u are doing
I want to build a big plant like this. Please tell me how it can be done???
a bigger version of what you just watched.
Fake
💪😎👍 🔥
GRACIAS GRACIAS GRACIAS