Looks like you’re enjoying the learning experience. I’d love to have one but it’s not practical at my age. With your vast creative talent there is no stopping you. Looking forward to following your progress!
great video. My brain works differently and my focus can be horrible. I was focused the entire video and learned a lot! You really have done a wonderful job. Thanks so much!
I mounted (screwed) my laser on 6" plywood risers. This allows me to place a small table if I need to cut or engrave thinner materials. I remove the table if I need to use for higher material. It's really fast to switch between several thicknesses of material.
Check out the Roly lasermatic10. It’s far simpler to use and is fully contained comes with a rotary and enclosure. The way you have yours setup will probably need to be cleaned a lot.
@Alley Picked the tempara paint is easy to clean up since it's water based, but the 2x gives great results although you have to use chemicals to remove.
Looking at buying Trees 30w air assisted for a multi a is setup. Basically same thing you have slightly more power. I believe they said it cuts up to 1/2” plywood with air assist, of course it also does engraving. They want $669 and I’ve seen some 20w around the $230 price. It is getting up there where my goal is eventually a 1500w or 2000w fiber for $2500 but I’m not quite ready to take that leap plus this project wouldn’t need that kind of power.
Finally a video that has answered my personal questions.. I believe I now know what model I am going to purchase for what I want to do... Have you personally thought about adding the IR laser module as an after purchase for engraving metal ?
what is the guarantee of the laser, how long can it last with work during the day, i.e. how long can it be exploited, is it of good quality and is it worth the money
Iam looking into a laser cutters for cutting gaskets when need on the spot as they say! Can you make a video on this as there's I believe lots other people who's wondering the same as me??
Please what are the setting you used to cut the leather perfectly using XCS. I use the XCS with my XTool D1pro 20W. I keep having issues when cutting leather. Sometimes it won’t cut through totally in some little parts another time i get the laser fire alarm beeping for caution. I don’t know what i am doing wrong. Please i will appreciate
The leather settings I used might not be helpful since I had to play with my settings in order to get the right cuts depending on the thickness of the leather. I am not an expert, however maybe I could offer a couple things to consider. Is the leather perfectly flat? I had sprayed mine with a little water and then ironed it flat. Have you tried making 2 passes with less power rather than one pass at a higher power setting? What type of base are you using? Are you using that metal sheet that comes with the laser? Different plates can dissipate the heat better. Do you have an air assist? All of these are considerations. Hope something I said helps. Tom
I want to get a laser machine. One thing I noticed. No one ever tells the selling price. I thought these lasers would cost a lot more. But the projects are endless. My biggest issue(s), Detail, I need very small with good to amazing detail. And I'll need a way to do round objects. X-Tool is in the running.
Hello! I have an Xtool like yours, and I would like to cut 925 silver plates with it... Do you know if it is possible...? Thanks in advance. lots of health
It is absolutely to help with burn marks and soot. It also keeps your lens cleaner. Just cut some wood with and without air assist. The difference is plain as day.
Very good question. I wasn't sure so I tested it on my F1 laser. There were a couple of small dots that seemed to etch but 99% was blank. I see that xtool sells a black paper for this purpose but I'm not going to purchase 2 sheets of it for $16. Perhaps the more power of the 20 Watt D1 laser might have a better effect but the 10 watt F1 is a no go. That will be a test for later. Thanks for the question.
Thanks, I am new to the xTool D1-20w. It's nice to see someone using the XCS software to create. I have a Mac and LaserBurn does not like Mac's. Great video. (Where do I find the setting for the various materials?)
I started by finding a lot of general settings for materials on the xtool site by just googling. Their site is not comprehensive at all. I used it as a starting point and ended up just experimenting myself. I tested a lot of settings on small samples of my material before making final cuts. Keep notes of the settings you use for a reference.
@@AlleyPickedI've seen videos using the creative space software where you choose the material and probably thickness and it displays suggested settings. Is this true?
May I ask how you created the grid lines to square up your projects? I’m still learning my d1pro and the free software so any help would be greatly appreciated. I made a spoil board just like yours with the leg cutouts but I’d like to engrave the grid lines like you did. Thanks for the video!
Using the xtool creative space, I simply drew a rectangle and then drew in lines. copied and pasted lines to complete the grid. Then you can group the whole thing together and resize as you wish. It was not too difficult.
Have You tried to cut MDF material? Cutting ideal, round holes in kitchen cabinet doors would make my current project a lot easier. Like this video. Nice job!
How do you find the center with the laser? I always frame the project but never seem to get it perfectly centered. I'm also using the same program as you
That is a challenge. I frame it multiple times often marking with a pencil where the laser passes and then using a ruler to measure to the ends of the material. Once you get it, you can repeat easily but it's that first one thats a pain. I plan to start using lightburn...perhaps they have a better method. So far, thats all I've got.
Great video thanks. Do you have any problems with smoke or smells without using an enclosure? Would you recommend an enclosure, or do you find it no issue / ok without one? Regards, Sam
Smell/smoke is a problem mostly with wood (Other things not as bad but still a bit...). I need to open a window with a fan blowing out if I do this in my house. So, yes, an enclosure with an exhaust is recommended if you plan to do a lot with a laser.
I haven't tried to cut metal yet, but from what I understand, this machine is not made for metal but it is possible to cut very, very thin metal using a diode laser. Generally you need a fiber laser to cut metals.
THAT's some cool stuff! And since "hobby store" was mentioned... LOL! And no, not trying to advertise or anything but I had ABSOLUTELY no idea. "Hobby Lobby" holds similar beliefs to those of Chick Fil-A: I guess the world system refers to them all as "deeply religious", even though Christianity's a relationship, not a "religion". Neat stuff! 👏
@@AlleyPicked Hehe! The cool part is I've personally known about those Chick Fil-A ethics for years but had no idea about H.L. until about 3 days ago. I was like, "WHAAAT??? REALLY???????????" LOL! Kinda like that sensation of "winning the lottery all over again". 👍
Can i use a sketch my great granddaughter did she is 13 amazing artist i want to put her sketches on wood can this be done. i’m told no i thinking someway at 79 not sure i’m in process of buying a laser
Nice video except no mention of any of the dangers of volatile compounds or laser risk to the eye. Someone could be using some fake leather and do some real damage to their lungs.
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
Hi. I have a few suggestions. I assume that you verified the power settings on the program and that somehow the settings didn't change. I also assume that you tested the height distance from the laser to the material. The fact that it worked once but not a second time is very strange. Are you using the xtool creative space software? If so, you may want to try light burn. It has a free trial period. A longshot but try using the USB cable rather than Wifi. Double check all the electrical connections. maybe there is a loose cable.
Maybe someone has already commented on this, but the thing with extension legs is that they have to be resistant to any wobbling. Otherwise the laser head jerking back and forth will make the whole machine wobble, making your cuts fuzzy.
Interesting idea. I don't think it will work. The black needs to be where the laser strikes the glass. Black paper on the front is an interesting experiment I may have to try one day.
That depends on the piece. Sometimes I don't care about a great finish and want something to protect it so I'll use a clear spray acrylic or polyurethane. Sometimes I might just use linseed oil or butcher block oil.
What’s up with this obsession with coasters? Is it a US thing? I don’t know why you would use one neither do I know anyone who uses them. Are they more intended as a piece of decoration than for actual use?
haha. Good point. I don't use them too often. They do come in handy if you have a cold icy drink on a nice piece of wood. Also, coffee mugs are rough on the bottom and can easily scratch the table. If you had a laser machine you might start to love them too :-)
Second part that astounds me, You used copyrighted materials without citing the book or author. You are stealing that person's artwork from copying from a book.
No, no, no, this is wrong. $1,000.00+ for a low-powered diode laser???? 😆 Not trying to cause any trouble, but for that money, you can get a much stronger CO2 laser, with faster and deeper cuts. For what it's capable of, it should not cost more than $500. Thanks for the video, though, and I hope you enjoy it.
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
This was a great video. I can’t wait until we can get a laser.
Alley Picked logo looks so good!
Best projects demo right to the point🙌🙌excellent. New follower here from Puerto Rico 🇵🇷
Thanks!
Great wee bit of content mate, thanks for this 👍🏴
Every time I hear the chime play I think it’s time for me to turn the page in my story book.
Looks like you’re enjoying the learning experience. I’d love to have one but it’s not practical at my age. With your vast creative talent there is no stopping you. Looking forward to following your progress!
Thanks for the video. I was on the fence about getting one but will put my order in now.
Hope you enjoy it!
great video. My brain works differently and my focus can be horrible. I was focused the entire video and learned a lot! You really have done a wonderful job. Thanks so much!
Thanks for the kind feedback.
I mounted (screwed) my laser on 6" plywood risers. This allows me to place a small table if I need to cut or engrave thinner materials. I remove the table if I need to use for higher material. It's really fast to switch between several thicknesses of material.
Great idea !!
Thanks you just got my xtool pro
I'm currently looking at the xtool S1. Video soon to come out.
For glass engraving, try using soot from a candle to matte the glass to etch it.
Thanks for the quick and concise review! Looking at this to buy.
I am now looking at the xtool F1 Laser. So far, it's pretty amazing. Keep an eye out for that review video.
Thank you so much for your details!!!
GReat Overview!!!
Gret really helpful - thanks.
Great video
How thick can you cut in foam?
Thanks
Check out the Roly lasermatic10. It’s far simpler to use and is fully contained comes with a rotary and enclosure. The way you have yours setup will probably need to be cleaned a lot.
Great review about a very good laser machine.
Machine laser ❤️
Very interesting 👍🏻
many of us with diode lasers use rustolium 2x spray paint for the carrier medium
Not sure which is better. I went for cheap :-)
@Alley Picked the tempara paint is easy to clean up since it's water based, but the 2x gives great results although you have to use chemicals to remove.
Looking at buying Trees 30w air assisted for a multi a is setup. Basically same thing you have slightly more power. I believe they said it cuts up to 1/2” plywood with air assist, of course it also does engraving.
They want $669 and I’ve seen some 20w around the $230 price. It is getting up there where my goal is eventually a 1500w or 2000w fiber for $2500 but I’m not quite ready to take that leap plus this project wouldn’t need that kind of power.
😃👍Danke für das Video. Viel gelernt
Finally a video that has answered my personal questions.. I believe I now know what model I am going to purchase for what I want to do... Have you personally thought about adding the IR laser module as an after purchase for engraving metal ?
I have the xtool F1 which has both the Blue and IR laser. I get by with that for now.
what is the guarantee of the laser, how long can it last with work during the day, i.e. how long can it be exploited, is it of good quality and is it worth the money
How exactly did you make the grid?
Get lab jacks to raise and lower the laser
Maybe the next model will do taxes too? Just kidding. Man this machine is awesome!
hello friend I found your tips great with what paint to use on glass
tempera paint or cold galvanizing compound spray
70% power on glass engraving? at what speed?
Is it true they're phasing out the D series?
Iam looking into a laser cutters for cutting gaskets when need on the spot as they say! Can you make a video on this as there's I believe lots other people who's wondering the same as me??
I'll look into it myself. Thanks.
Please what are the setting you used to cut the leather perfectly using XCS. I use the XCS with my XTool D1pro 20W. I keep having issues when cutting leather. Sometimes it won’t cut through totally in some little parts another time i get the laser fire alarm beeping for caution. I don’t know what i am doing wrong. Please i will appreciate
The leather settings I used might not be helpful since I had to play with my settings in order to get the right cuts depending on the thickness of the leather. I am not an expert, however maybe I could offer a couple things to consider. Is the leather perfectly flat? I had sprayed mine with a little water and then ironed it flat. Have you tried making 2 passes with less power rather than one pass at a higher power setting? What type of base are you using? Are you using that metal sheet that comes with the laser? Different plates can dissipate the heat better. Do you have an air assist? All of these are considerations. Hope something I said helps. Tom
I want to get a laser machine. One thing I noticed. No one ever tells the selling price. I thought these lasers would cost a lot more. But the projects are endless. My biggest issue(s), Detail, I need very small with good to amazing detail. And I'll need a way to do round objects. X-Tool is in the running.
Hello! I have an Xtool like yours, and I would like to cut 925 silver plates with it... Do you know if it is possible...? Thanks in advance. lots of health
I have no experience with that. Generally, this laser only cuts very thin metal.
the air assist is not for burn marks it makes cutting easier as it clears out the debris from the kirf
You may be correct but I do notice on the wood that when I don't use it, there are burn marks.
It is absolutely to help with burn marks and
soot. It also keeps your lens cleaner. Just cut some wood with and without air assist. The difference is plain as day.
Can you put Matt black vinyl wrap on glass or acrylic instead of paint? The vinyl can then be peeled off.
Very good question. I wasn't sure so I tested it on my F1 laser. There were a couple of small dots that seemed to etch but 99% was blank. I see that xtool sells a black paper for this purpose but I'm not going to purchase 2 sheets of it for $16. Perhaps the more power of the 20 Watt D1 laser might have a better effect but the 10 watt F1 is a no go. That will be a test for later. Thanks for the question.
@@AlleyPicked thx for giving it a shot, maybe with a higher watt laser
Can this be used to engrave/etch golf balls?
I've never done it but I believe you can engrave a small image on the golf ball. I googled it and found a few examples but didn't see too much on it.
It was weird why you didn't use the laser to bore your holes in the leather
At 6:45 minutes . When you paint the surface of the wood , what is you setting to get a very nice black engraved letter ?
Thats just the natural color after using the laser. I didn't do anything.
Do you have any smoke collection system setup?
I don't yet but I do need to get one.
Thanks, I am new to the xTool D1-20w. It's nice to see someone using the XCS software to create. I have a Mac and LaserBurn does not like Mac's. Great video. (Where do I find the setting for the various materials?)
I started by finding a lot of general settings for materials on the xtool site by just googling. Their site is not comprehensive at all. I used it as a starting point and ended up just experimenting myself. I tested a lot of settings on small samples of my material before making final cuts. Keep notes of the settings you use for a reference.
@@AlleyPickedI've seen videos using the creative space software where you choose the material and probably thickness and it displays suggested settings. Is this true?
Can you engrave a Name in a Paver or Brick as a memorial with this Laser?
I have the xtool D1 but the laser keeps on drifting to the right, ever had that happen?
I have not had that issue but the only thing that causes movement are belts. Check them both for tightness.
May I ask how you created the grid lines to square up your projects? I’m still learning my d1pro and the free software so any help would be greatly appreciated. I made a spoil board just like yours with the leg cutouts but I’d like to engrave the grid lines like you did. Thanks for the video!
Using the xtool creative space, I simply drew a rectangle and then drew in lines. copied and pasted lines to complete the grid. Then you can group the whole thing together and resize as you wish. It was not too difficult.
Have You tried to cut MDF material? Cutting ideal, round holes in kitchen cabinet doors would make my current project a lot easier. Like this video. Nice job!
I have engraved on MDF. I have no doubt it would also cut through it --depending on the thickness.
I would not do that, MDF can create toxic fumes when heated up. If you dont have an air filter it can potentially be fatal.
How do you find the center with the laser? I always frame the project but never seem to get it perfectly centered. I'm also using the same program as you
That is a challenge. I frame it multiple times often marking with a pencil where the laser passes and then using a ruler to measure to the ends of the material. Once you get it, you can repeat easily but it's that first one thats a pain. I plan to start using lightburn...perhaps they have a better method. So far, thats all I've got.
Great video thanks. Do you have any problems with smoke or smells without using an enclosure? Would you recommend an enclosure, or do you find it no issue / ok without one? Regards, Sam
Smell/smoke is a problem mostly with wood (Other things not as bad but still a bit...). I need to open a window with a fan blowing out if I do this in my house. So, yes, an enclosure with an exhaust is recommended if you plan to do a lot with a laser.
I wish xTool would make Creative Space as good if not better than Light Burn.
yea, I'm trying to learn light burn now. It's definitely not as easy.
Does it work on Metal to make jewelry pieces?
I haven't tried to cut metal yet, but from what I understand, this machine is not made for metal but it is possible to cut very, very thin metal using a diode laser. Generally you need a fiber laser to cut metals.
@@AlleyPicked thanks for the info
@@JGWedstool sells a IR module that etches steel but I don't think it cuts steel
THAT's some cool stuff! And since "hobby store" was mentioned...
LOL! And no, not trying to advertise or anything but I had ABSOLUTELY no idea. "Hobby Lobby" holds similar beliefs to those of Chick Fil-A: I guess the world system refers to them all as "deeply religious", even though Christianity's a relationship, not a "religion".
Neat stuff! 👏
I shop often at Hobby Lobby and I just ate at Chick Fil-A yesterday.
@@AlleyPicked Hehe! The cool part is I've personally known about those Chick Fil-A ethics for years but had no idea about H.L. until about 3 days ago. I was like, "WHAAAT??? REALLY???????????" LOL! Kinda like that sensation of "winning the lottery all over again". 👍
Can I engrave on plastic?
I believe it's possible. I have not done it yet.
Can i use a sketch my great granddaughter did she is 13 amazing artist i want to put her sketches on wood can this be done. i’m told no i thinking someway at 79 not sure i’m in process of buying a laser
Hi, I think it can be done. If you want to email me a picture, I can give it a try. alleypicked@gmail.com
Did you buy the laser or is this another promotional video?
Are you located near Mt Olive, Il?
4 hours away. The Church is in Chicago.
does anyone else get raised portions where the rings are on wood burning with their laser? How to make this go away?
About all you can do is sand them down.
Nice video except no mention of any of the dangers of volatile compounds or laser risk to the eye. Someone could be using some fake leather and do some real damage to their lungs.
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
Hi. I have a few suggestions. I assume that you verified the power settings on the program and that somehow the settings didn't change. I also assume that you tested the height distance from the laser to the material. The fact that it worked once but not a second time is very strange. Are you using the xtool creative space software? If so, you may want to try light burn. It has a free trial period. A longshot but try using the USB cable rather than Wifi. Double check all the electrical connections. maybe there is a loose cable.
This video is brought to you by circles
Maybe someone has already commented on this, but the thing with extension legs is that they have to be resistant to any wobbling. Otherwise the laser head jerking back and forth will make the whole machine wobble, making your cuts fuzzy.
Could you just put colored paper behind the glass?
Interesting idea. I don't think it will work. The black needs to be where the laser strikes the glass. Black paper on the front is an interesting experiment I may have to try one day.
What do you use to protect wood when you finish a proyect?
That depends on the piece. Sometimes I don't care about a great finish and want something to protect it so I'll use a clear spray acrylic or polyurethane. Sometimes I might just use linseed oil or butcher block oil.
@@AlleyPicked thank you so much this info!
These were complaints not projects
Watch the whole video.
@@AlleyPicked hey I apologize I think I must have somehow got videos mixed up. Nice video and thanks for sharing.
What’s up with this obsession with coasters? Is it a US thing? I don’t know why you would use one neither do I know anyone who uses them. Are they more intended as a piece of decoration than for actual use?
haha. Good point. I don't use them too often. They do come in handy if you have a cold icy drink on a nice piece of wood. Also, coffee mugs are rough on the bottom and can easily scratch the table. If you had a laser machine you might start to love them too :-)
I don’t think you need to paint the glass… just engrave
You do, if you won't paint it laser beam will just go thru
Very very incorrect.
Ok thank you. My Co2 just engraved without the need to paint the glass.
Co2 lasers dont, also some paint can release toxic fumes when heated up.
Second part that astounds me, You used copyrighted materials without citing the book or author. You are stealing that person's artwork from copying from a book.
Unless the book is of templates intended to be used as source material. These are readily available online.
Its a toy and a waste of time
No, no, no, this is wrong. $1,000.00+ for a low-powered diode laser???? 😆
Not trying to cause any trouble, but for that money, you can get a much stronger CO2 laser, with faster and deeper cuts.
For what it's capable of, it should not cost more than $500.
Thanks for the video, though, and I hope you enjoy it.