After to pull the cable you get it open put it back together then its just going to work. Wont it still be doing the same thing after put back together
Yo how he got that door panel off without cussing it out! I don't know. But I would have been fussing at the door, like The ROCK in a wrestling match, Bleep BLEEP you Bleeeeep 🤣🔥.
@@NotMiglo My situation was this: My stepson dented his door, so I found a replacement online. The interior trim and wiring harness were different, so I swapped them out and then installed the door. That's when it had the above problem. Through the process of elimination, I figured out that the actuator in the replacement door was defective, so I swapped it out from the damaged door (bench tested the two side-by-side before installing the swap) and everything worked correctly.
After to pull the cable you get it open put it back together then its just going to work. Wont it still be doing the same thing after put back together
This is the guy u need for ur job when ur car breaks down👍👍👍👍
😎👍
That wrap is sick
Thanks 😎👍
I love the new camera. This is my favorite video quality.
Yo how he got that door panel off without cussing it out! I don't know. But I would have been fussing at the door, like The ROCK in a wrestling match, Bleep BLEEP you Bleeeeep 🤣🔥.
Thank you so much. Happening to me right now. WOW
Mate, you seriously saved me!!! This worked on my Chrysler 300, thanks so much.
You're welcome!
I pulled that cable and the door opened, re-assembled everything, but when I closed the door, I had the same problem.
Had the same problem, please let me know if you found the solution.
@@NotMiglo My situation was this: My stepson dented his door, so I found a replacement online. The interior trim and wiring harness were different, so I swapped them out and then installed the door. That's when it had the above problem. Through the process of elimination, I figured out that the actuator in the replacement door was defective, so I swapped it out from the damaged door (bench tested the two side-by-side before installing the swap) and everything worked correctly.
Bro this video saved me from the biggest head ache thankyou sm
No problem 👍
Its a piece that holds the end of the Door Latch Cable in place what's is that piece called
Thank you
Bro saved my life
Had a great time doing it. It work but then i got home and its not working again. Any thoughts
Great video man it happened to my Charger today
Good job man!!!
This really worked out for thanks man💪🏼
No problem 👍
Thanks bro
Thanks for this video!
No problem 👍
Jesus Christ. Thanks!!! Been trying on and off for two freaking days 😒
My problem is the driver door handle from the inside is becoming harder and harder to open. Like it feels like it’s gonna snap. Any fix for that
Thanks so much
No problem 👍
And what happens if you pull that cable and it still doesn’t open ??
Probably is because the child safety lock is on, check this video it might help ruclips.net/video/tvfW_kuOSjE/видео.htmlsi=_ymS1fwrgDbNzokR
I did this and it worked, but when the panel was put back on and the door was locked and unlocked, the door started to not open again
Probable the lock mechanism is already bad 👍
Did you figure it out
thank you bro I been looking for a video the shows this information
Not problem, Glad I could help
Reminds me of Valentines candy
😁👍
👏👏👏👏👏👏👏👏👏👍
😎👍
First!
Awesome 👏👍
2nd🤩
Cool 👍
so my door open but only from the inside not from the outside