SDR Console V3 Install Setup And Overview on SDRplay RSP1A
HTML-код
- Опубликовано: 9 авг 2024
- You can buy the SDRplay products on Amazon (sold by HRO) ... Links below:
RSP1A: amzn.to/2IpWzkW
RSP2: amzn.to/2XgncvR
RSPduo: amzn.to/2Gk1X5x
My Amazon Store:
www.amazon.com/shop/sevenfort...
This video shows installation of SDR Console Version 3 running on an SDRplay RSP1A. You can learn more by visiting the SDRplay website at www.sdrplay.com 
Наука
Many thanks SevenFortyOne. Such informative information videos are much appreciated by the fast growing community of SDRplay RSP users :-)
Thank you! I enjoy using your radios and sharing my experiences with others.
5 years later and I found it very useful. Thanks
Ben blij met deze uitleg.niet te gehaast en rustig ben er blij mee .groetjes uit holland/Friesland 19rf796
I have DVB+FM +DAB 820T2 FM Dongle. Till now I have been using HDSDR and could hear all the FM stations in Hyderabad City in India where I reside. However, the user interface on HDSDR is a big primitive as there are no memory tabs. While searching for alternate software with advanced options, I stumbled upon your Video. Thank you for good explanation. I installed the SDR Play version of 2019 where the software is automatically recognizing the Dongle connected. Thank you.
Excellent informative video. Thank you for sharing ,very much appreciated.
Thank you for your super good demonstration.
I have V3 on this computer here in the house. Now that I made 2 antennas all is good. Good vid Rob
Thanks Buzz. I'm glad you have yours working now.
741 thanks so much. I have airspy and SDRplay1 and 2. I personal found SDRUNO works dismal with my random wire and inverted vee. But SDR Console v2 was great and showed how powerful SDRplay is , I want to listen to VLF but my antenae are too noisy . I going to switch to v3 today .
Great overview of the SDRplay hardware and software.. thank you. I ordered a RSP1A a couple days ago and looking forward to trying it out. I am interested in using it for the new FM ham Fox Sats and for spotting for DX with CW Skimmer from my qth. 73.
Thank you! I think you will enjoy you RSP1A.
Thank you uploading this video. Very informational. 👊🏾
Outstanding video. Thank you therfore.
I think this is the best software for my rsp1a
Thanks for the great Video
nice explanation, thanks!
Good introduction. Hope you will do more on SDR Console including comparison to SDRuno. Thumbs up and shared.
Thanks Tom! I have some plans for more videos on the SDRplay units and related software. However, I'm busy at work right now and some of my free time is being consumed by working OT so my video production my slow down for a while. But stayed tuned....there will be more at some point.
Ok, thank care.
Excellent information. Thank you so much. I have a question for you. How I can record the spectrum to convert to pixels. Thank you.
Do you have any video about how to add frequencies to the favorites?
Brilliant Thankyou
Great Video . I have 2 x Pi4 on order and 2 x RTL SDR coming and I'm mounting both Pi4 and both RTL SDRs up on my VHF / UHF Tower about 6 feet under my antennas cheaper doing this then paying for Hardline Coax lol . But I will power Pi and RTL SDRs POE and remote to them . This way I can listen 24/7 to see when 6 meters , 2 meters is open . And when it is , I'll power it all down and Fire up the Flex 6500 . Also I have a SDRplay I'll do the same with for HF . Maybe I should make a video when all done and setup .
Sounds like a great setup! By all means make a video about it! Alot of people, including me would love to see the details of what you are doing. 73
Very nice
I see on the download page at website V3 is gone and now 3.02 single tuner mode only. What is single tuner mode?
However did I manage professionally perfectly well for 20 years with receivers that just had very good filters, basic AGC functions, 'slow' and 'fast' tuning and excellent dynamic range? This is feature-rich software is all very nice to have, and you're doing a great job explaining it, but maybe the designers have lost the plot by giving every imaginable function - and many more besides - making it impenetrable for all the newbies and basic radio hams who wouldn't know the difference between FFT Blackman Opt and Kaiser-Bessel beta 25 if they fell on their heads!
And just found it has pseudo stereo? Seriously?
I get your point but I'll offer up a counter point for the sake of discussion. This is a device and software marketed toward hobbyists and enthusiasts. The majority of the user base is looking for all of these features (and probably more) even though they may not know what they all do or even how to use them. If a user wanted just basic controls they could go buy a regular general coverage receiver.
I am just getting into Radio Astronomy and I am looking at several Spectrum Anylizer packages. I would sure like to see a few video's of this package dealing with the 21 centimeter Hydrogen band.
Can you show how to do replay attack with sdr console v3?
Can anyone help me get my window back on the left , i lost all my stuff thats in the left where you choose modes and filters and change frequency and all that good stuff , i forgot how to get it back
I've lost the control panel that's normally on the display's left. How do I get it back ?
Fantastic video, very useful. Am curious how to do the control with FLDIGI and panadapter control to a radio as SDRPlay does. De WO8USA🇺🇸🇺🇸🇺🇸
the scale that is displayed say -100dbm, is that the power of the signal being received. what happens if i transmit a high power signal of say 125 W, will i be able to reveive it and will this scale show + 50 dbm? plz help me with this!!!!
Don't transmit high power directly into or near the unit or you will damage it. Check the manual and the sdrplay website for their recommendation and specs.
i got and rtl sdr v3 where is the official sdr console site
You mentioned "history" but you didnt show how to show that window. I cant find it anywhere.
If Ihave the sdrplay duo can I run this on both receivers at the same time like sdr uno?
I'm not sure if sdr consoles supports 4he dual receiver
Using the Dongle I have ie. DVB+FM +DAB 820T2 FM, kindly inform how to receive local AM Station which is broadcasting on 737 Khz. I tried but could not. Please inform.
It is my understanding that the dongles don't work below 25MHz or so.
Hello Sir Thank you very much for your immediate clarification. I ordered for SDR RTL2832 + R820T which has two options one for 100KHz-24MHz and 100KHz-1.7GHz. Kindly verify the details of the SDR for above two options in this link:
www.fabtolab.com/SDR-RTL2832-R820T
I hope I can configure above SDR (ordered and yet to be received) in SDR Console V3 and get local Medium Wave Stations also in the range of 500 to 1600 Khz. Kindly clarify.
How did you manage such an amazingly low noise floor?
I live in the middle of nowhere and have few modern appliances that generate noise
Program started with noise floor 3 inches below the bottom of the screen, How do you raise it up so you can see signals?
In the options button on the spectrum window
@@SevenFortyOne Thank you. This thing is an overly complicated mess compared to SDR#
Классная программа.
My layout looks nothing like that?
Hey, Rob. How do you do a scan in SDR Console?
Hi Tom...it's been a long time since I've looked at sdrConsole. I'll have to take a look at it now but I thought it didn't have scan capabilities when I last used it
@SevenFortyOne it seems to have a button fir it but it dies nothing. See my recent shows. Please.
I'm tied up at work until late this evening but will try to look tomorrow
@@SevenFortyOne no hurry
@@hamrad88 I don't have SDR console installed on my computer - what version are you using? Last notes I saw said scanning is still not supported but i'm not sure how old those notes are
Wow look at your CPU 45% . My CPU never gos over 0.3% Even if I have my Flex 6500 and SDR Console at the same time it will get up to 0.7% But my PC is I7K 10% over clocked with 32gb ram and a very hot video card . lol
Sounds like a nice setup. I got a new computer recently and it works much better now
I've lost the control panel that's normally on the display's left. How do I get it back ?