2017 HONDA CR-V - HOW TO REPLACE FRONT BRAKE PADS - DIY
HTML-код
- Опубликовано: 6 июл 2020
- amzn.to/38AAWsl - KFE KFE2036 - 104 Ultra Quiet Advanced Premium Ceramic Brake Pad Front Set (This is a brake pad kit that had good reviews on Amazon and looks like it has the proper recesses in the backing plates for the springs)
amzn.to/31PK8b0 - Power Stop 16-2036 Z16 Evolution Front Ceramic Brake Pads (I have used many Power Stop brake kits and have had good success so far)
I couldn't find the OEM Honda brake pads online. The ones listed had bad fitment reviews. You may need to go to a local Honda Dealer...
amzn.to/2L6obdd - Sil-Glyde
amzn.to/38BqY9Y - Long Handle Ratchet, Flex Head, 72 Tooth ( I really like this ratchet)
amzn.to/38FUFXK - Milwaukee M12 3/8" ratchet
amzn.to/2VQD4qA - GearWrench 3/8" drive torque wrench 10-100 ft. lbs 85062
amzn.to/3e7TfGC - Caliper compression tool similar to using a C-clamp if you prefer this method over the screwdriver method of prying the caliper piston back in.
amzn.to/2DcFycq - MISSION AUTOMOTIVE Brake Caliper Hooks/Brake Caliper Hangers (if you don't have some large zip ties or bent coat hanger....or an old piece of rope with some old bungee cord ends.)
Just a quick video showing how I replaced the front brake pads on a 2017 Honda CR-V. I didn't resurface or replace the rotors this time. The brake pads we got were from NAPA that didn't have the small recess in the ends of the backing plate for the clips/springs that push against the caliper bracket to prevent the pads from constantly dragging on the rotors. I would recommend getting the OEM Honda pads from your dealer or other source. The other Brake pads I found on Amazon in the links above look like they would work fine as well.
Tools Needed:
Large screwdriver or small pry bar
Wire Brush
14mm socket and/or wrench
19mm Open-End Wrench
Torque Wrench
Brake Grease
The torque specs I found online: 36 ft. lbs. for the caliper slide pin bolts. (I recommend checking that in your manual to make sure it's correct.)
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
Song used in the video:
"Half Day" by Bad Snacks
This video is intended for entertainment and informational purposes only. Any repairs you make are your responsibility. I am not liable for any damages to you or your vehicle or your property.
As an Amazon Associate I earn from qualifying purchases. 
Авто/Мото
![J.P., NLE Choppa - Bad Bitty (Remix) [Official Music Video]](http://i.ytimg.com/vi/rBDa6BCvw10/mqdefault.jpg)
One of the better brake videos I have watched.
Great job narrating, even tho brakes are an easy job I like that you had extra steps with all the clips. Sometimes I'll watch an expert such as yourself replace/repair something and everything is perfect. Thanks
Excellent demonstration
Great video, and even better pacing. Thanks, man. This helped me out on a part of the process I didn’t know.
Thank you so much, I’m glad to hear my video helped you out.
Take care,
-Dan
I have a new girlfriend that has his vehicle and I changed her shed a flat on a front and she's got one eight inch left on her pad thank you for the warning on those clips God bless
Thank you for the vedio.
Excellent!
Good info! I need to do this job on my wife's CRV in a couple weeks. Any issues with the auto-braking sensors or any computer resets that are necessary with the caliper compression?
Cool it’s tha the same for a year 19 right
Good video. Sir. Thank you very much. Wade Out..
Awesome
Very good video . Honda Quoted me 359.22 for the front brakes
Thank u for job well done .What is the milage on this car?
60k miles
Doesn’t talk about the sensor light that now shows up ( light break) have to reset it
Is white lithium grease ok?
Hi Lou,
White lithium grease is not recommended because it is a low temp grease. Any silicone paste or brake caliper grease should be fine.
Thanks for watching!
-Dan the Fix it Man
What would happen if the clips came off?
Nothing will happen...it will just squeal when you hit the base of the brake pads and it will squeel like a pig
Man, I'd be pissed about those clips... thank you for the warning. Hopefully NAPA has changed their manufacturing, lol, I'm sure.
So is this a 2017 crv or a 2001 avalon
Oops, sorry about that title mess up...Good catch.