Hangkai Outboard Motor Review after 3 Months

Поделиться
HTML-код
  • Опубликовано: 22 сен 2021
  • Hangkai four-stroke air-cooled 4hp motor. Not a long time review since I had it for only 3 months but I think if it hasn't broken down after this time it probably won't after 6 months or a year either. Watch this video if you plan to buy one of these chinese manufactured outboard motors.
    I think its a great little 4-stroke motor at the price I paid only $250!
    If you like what I do here and want to support the channel click that subscribe button.

Комментарии • 133

  • @bobbycampos6576
    @bobbycampos6576 2 года назад +3

    I’ve got one myself and it’s also been great. 👍🏻

  • @vonvoyage14
    @vonvoyage14 2 года назад +11

    Its a cute little motor that will give you less problems and drive you home slowly but safely. Totally worth it

  • @JRMSweeps
    @JRMSweeps 2 года назад +1

    great vid thanks for the info and gps info

  • @moneyshot7775
    @moneyshot7775 2 года назад +5

    Ive got one. Handy lightweight little motors! I upgraded spark plugs then re-plumbed/modified my exhaust to go underwater which not only protects it from rainwater being exposed and wide open how it came from the factory but more importantly.....it's now as quiet as a mouse pissing on cotton!😂

    • @GurrasGarage
      @GurrasGarage  2 года назад

      👍

    • @richcurtis813
      @richcurtis813 2 года назад +1

      Hi, how did you modify the exhaust / what with?
      Quieter sounds a better idea. Thanks

    • @moneyshot7775
      @moneyshot7775 2 года назад +1

      @@richcurtis813 I removed the "muffler" (which is nothing but a hollow container basically) and I cut the threaded end from a 1/2" pipe nipple roughly 1" long....welded it over the existing exhaust pipe using a wire welder....then screwed on a 90° ell, a 1/2"x5-ish" pipe nipple, a 1/2"x3/4" bushing, and then added a 24" copper flex connector made for water heaters. I aimed my 90° ell and nipple at an angle barely missing my spark plug then bent/plumbed my copper to where it's tucked up tight running down the back side of my shaft. I can still turn roughly 190ish degrees which is fine seeing as I never use "reverse" mode with this engine anyway.

    • @HOBFMS
      @HOBFMS 2 месяца назад

      @@moneyshot7775um, seems easy to do…. Yeah…

    • @tdok
      @tdok 2 месяца назад

      @@moneyshot7775 dude, you need a video showing this!!

  • @miztatone918
    @miztatone918 Год назад +2

    I think I'm going to pull the trigger on this one. It's sole purpose will be as a back up motor on my 20 foot center console. I really don't like trolling motors I tend to drift or anchor while fishing but if I have mechanical issues I'd still like a backup motor that I can limp back to the dock with if I needed to. I'd rather invest 250 on this then drift into the rocks without power or control. That or pay for a tow in . This is small enough and light enough that I can mount it on the bow where the trolling motor was . And then I don't have to worry about maintenance or replacing two batteries and honestly probably end up saving some weight. 2 marine deep cycle batteries and my Minnkota trolling motor all together vs that little outboard I'm more than sure will be a weight savings 😂. Thanks for testing it out for people like me . I think it will do exactly what I need it for.

    • @GurrasGarage
      @GurrasGarage  Год назад

      Good luck, mine still works perfectly after 2 seasons 👍

  • @brncrvr
    @brncrvr 2 года назад +4

    I have one of these outboards as well. I’ve used it 5 or 6 times without issue. It was sputtering the first ride, had to enriched the fuel mix and I put in an Ngk plug, seemed to solve that. It hauls 2 people and a 17’ aluminum canoe no problem. Definitely not a 3.6hp though as advertised, seems more like 2.5 to me.

    • @turbod15
      @turbod15 2 года назад

      What fuel mix

    • @brncrvr
      @brncrvr 2 года назад +1

      @@turbod15 air/fuel “ratio”

    • @Wingnut353
      @Wingnut353 Год назад +1

      @@turbod15 It's a 4 stroke it has oil in the crankcase so you dont' mix oil in the fuel.

    • @germanborgesxrt
      @germanborgesxrt Месяц назад

      yes, you do not need to mix, this is because you have that problems

    • @brncrvr
      @brncrvr Месяц назад

      @@germanborgesxrt I meant I had to adjust the air/fuel screw to solve the sputtering.
      Do not mix oil into the gas!
      My motor is still going strong, used it the other day.

  • @davedubins7767
    @davedubins7767 2 года назад

    You routed the throttle cable in front of the motor. It's actually supposed to be routed behind. I did the same as you and found that it got in the way when I was turning. So if you take the tiller arm off, you can just route the cable in the crease behind the engine and it works out a bit better there (unless you aren't annoyed by the cable slack when you turn).

    • @GurrasGarage
      @GurrasGarage  2 года назад

      I havent routed the cable, it come like this from the shop.

  • @blackwoei7486
    @blackwoei7486 Год назад

    How to drain the engine oil?

  • @yuwang9496
    @yuwang9496 2 года назад +2

    (I can help to translate) The label shown at 1:56 says that "Use high-quality oil. During the run-in period, change the oil every 8~10 hours. After that, you can change the oil every 20 hours."

  • @jbreefer148
    @jbreefer148 2 года назад +6

    I got one of these motors too and I'm taking it out for the first time on my Saturn 13' inflatable boat. I can't believe that it's only 2hp instead of the 4 as they advertised. Will let you know how it goes.

    • @GurrasGarage
      @GurrasGarage  2 года назад +1

      👍

    • @gosttunter
      @gosttunter Год назад +1

      You mean you got ripped off ? False advertising to get your money? I would send it right back and does it say what size it is on motor.

    • @Wingnut353
      @Wingnut353 Год назад

      @@gosttunter LOL... its a $250 motor, so no nobody got ripped off, false advertising yes but you get what you pay for (a 2hp china clone of a honda engine.... they run well enough)

    • @MrBertWayne
      @MrBertWayne 15 дней назад +1

      ​@gosttunter it tells you the # of CCs in the description, all you have to do it google the hp output. Alot of folks don't read the details before buying them.

  • @unlimitedj06
    @unlimitedj06 2 года назад +3

    If it makes a boat that size go that fast, I should be able to fly in a native kayak then.

  • @Viper6-MotoVlogger
    @Viper6-MotoVlogger 2 года назад +3

    Hmmm, I wonder why they pointed the exhaust upwards where rain can get in. I guess you can always replace the washers with stainless ones. I would buy a spare propeller just in case. All in all, not bad for the price. Be safe.

    • @GurrasGarage
      @GurrasGarage  2 года назад

      Really bad enginering ? But for the price you cant expect much 😁 Yes I will get a spare propeller in aluminium 👍

    • @dgthrg
      @dgthrg 2 года назад

      @@GurrasGarage where can you get a propeller that will fit? I am thinking of buying this motor. where should I buy the motor?

    • @GurrasGarage
      @GurrasGarage  2 года назад

      @@dgthrg Have you tried to google it? for example Hangkai four-stroke air-cooled 4hp motor. You are welcome.

  • @HANHAN-lg8ip
    @HANHAN-lg8ip Год назад

    Yes. But you can choose CUKUSIN too.

  • @davidnovak8929
    @davidnovak8929 2 года назад

    May i ask why are there 2 tubes coming from the fuel reservoir?

    • @brncrvr
      @brncrvr 2 года назад +2

      It’s got a “pumper” diaphragm carb- one is a return line.

  • @davidjoeseph2646
    @davidjoeseph2646 Год назад

    Random idea or question... do you think the exhaust from the harbor freight ghost engine would fit this engine?

  • @stephengalvan7722
    @stephengalvan7722 2 года назад +1

    That's great 5 mph against the current

    • @GurrasGarage
      @GurrasGarage  2 года назад +2

      Actually its 5 knots so 5.75 mph

  • @lizmorris7156
    @lizmorris7156 6 месяцев назад +1

    Hi Gurra, thanks for sharing. Can this motor function properly in heavy rain?

    • @GurrasGarage
      @GurrasGarage  6 месяцев назад +1

      It probably can but I haven't tried, normal rain sure no problem. Check out my other videos on this motor, the best way to avoid water into the motor is to fix the exhaust pipe.

  • @ebutuoyebutouy
    @ebutuoyebutouy 2 года назад +1

    Awesome. Thanks for sharing. How many hours?

  • @GeorgiaRidgerunner
    @GeorgiaRidgerunner 2 года назад +1

    Hey man great video
    Hope all is well with that motor
    Im thinking of getting one of these for my 10 FT. Jon boat
    My boat weighs about 150 Lbs. with anchors anchor mates seats
    And gear i weigh 143 lbs
    Do you think this out board would be sufficient to haul my boat upriver

    • @GurrasGarage
      @GurrasGarage  2 года назад +1

      Absolutely, no problem

    • @GeorgiaRidgerunner
      @GeorgiaRidgerunner 2 года назад +1

      @@GurrasGarage ok then ill be ordering on within the month
      If you have the time i hope that you could check out my channel ive got d.i.y. videos projects restorations and many more things planned

  • @zest431
    @zest431 2 года назад +9

    So I finally dove in and bought one. And i've been testing it in my lake. After about 30 mins of running it starts to sputter and skip and almost sounds like it is misfiring. Ive been playing with the carburetor air and fuel screws. I also replaced the factory spark with a nicer brand. So any advice? Is this just the motor getting hot and saying hey... 30 mins man time for a break because im air cooled? Have you ever encountered this??? Any advice helps. Love your videos!!!

    • @GurrasGarage
      @GurrasGarage  2 года назад

      In the beginning when it wasn't broken in I had it misfiring a little at full throttle but never after my new NGK spark plug. Is your motor broken in? if not dont use full throttle. I didnt use full throttle until after 3 hours, except for some short bursts. Or if its really hot where you are I think since its air-cooled and not fast enough to cool it maybe thats the cause?

    • @xdrm24
      @xdrm24 2 года назад +2

      Take apart your carb. Sometimes there is debris and small pieces of junk. Clean the bowl and carb nicely. Make sure all the gaskets and O Rings seal well and are in good shape. Next, spark plug as he mentioned, gap appropriately. As well to make sure you're not over filling the engine with to much oil. Also check the gap on the coil to flywheel. To large of a gap will reduce the spark the engine can produce.

    • @xdrm24
      @xdrm24 2 года назад +4

      You can also take a rough wire wheel and scratch up and put small grooves in the cooling fins around the cylinder and head. This will help with cooling. I've done this trick with a few briggs I built up.

    • @RODNEYSGARDENINGADVENTURES
      @RODNEYSGARDENINGADVENTURES 2 года назад

      Do yourself a favor and get a water cooled motor it has better longevity

    • @Yelladog78
      @Yelladog78 Месяц назад

      Use Vtwin engine oil only & run a ngk spark plug

  • @hokiedokie
    @hokiedokie Год назад

    Does it come with a serial number or id number so i can register it with the state of texas here?

  • @stumbler669
    @stumbler669 2 года назад

    Hi this outboard need Marine 4t oil or can use normal 4t oil ?

    • @GurrasGarage
      @GurrasGarage  2 года назад +2

      Use normal 4t 5W-30 synthetic oil. 240ml

  • @dannyrusso8279
    @dannyrusso8279 2 года назад

    Just got this motor today. What NGK plug will work on this motor? Also, have you had any gear oil leak out? I noticed there isn't a gasket when I removed the gearbox cover to add oil.

    • @GurrasGarage
      @GurrasGarage  2 года назад

      NGK CR5HSB. There should be a rubber o-ring in the gearbox cover.

    • @dannyrusso8279
      @dannyrusso8279 2 года назад

      @@GurrasGarage Thanks for the info. I guess I didn't see the O-ring. Leaving it overnight it didn't leak, so I guess it's ok. Changing the sparkplugs on my 12hp Hangkai to NGK improved performance, so I'll definitely do it on the 4hp.

  • @alwayslearningsomethingnew7115
    @alwayslearningsomethingnew7115 2 года назад

    How much oil do you put in? 240ML?... Manual is fuzzy, vague... Or the 2 markings on the bottom of the dipstick?

    • @GurrasGarage
      @GurrasGarage  2 года назад +2

      Yes between the markings, do not overfill! The motor is a Honda GXV50 clone, google it and download the manual for free.

    • @alwayslearningsomethingnew7115
      @alwayslearningsomethingnew7115 2 года назад

      @@GurrasGarage Cool thanks.. Hard to get a good reading.. lol and if it is the bottom markings.... seems like it's not enough oil for some reason lol.... Have you ever filled it to the markings and then drained it to see.. the approximate ML? or is that it.. .240ML. That way, I can just pour the exact/close amount of oil without having to play with the dipstick.

  • @riolaflare7180
    @riolaflare7180 2 года назад

    Great video!! Do you think an elbow with a go kart muffler will quiet it down?

    • @GurrasGarage
      @GurrasGarage  2 года назад

      Thanks, that could work 👍

    • @tommak6516
      @tommak6516 Месяц назад

      Be careful of creating too much backpressure with your 'rube goldberg' modifications.

  • @volkersgym3766
    @volkersgym3766 Год назад

    So you put in gas and oil separate? Where? Thank you!

    • @GurrasGarage
      @GurrasGarage  Год назад

      Watch the playlist on my channel, lots of info there

  • @DrSteveCallender
    @DrSteveCallender Год назад

    Very helpful videos! I just got a 3.5 hp and as I am breaking it in in a trash can with water, at idle, it gets smoky. It's not quite level - does this matter, will it harm the new motor?

    • @GurrasGarage
      @GurrasGarage  Год назад

      I assume its a 4-stroke. If it smoke a lot it is probably too much oil in the motor, check oil level.

  • @craigbuchan316
    @craigbuchan316 2 года назад

    Interested in getting one of these. My only question is. Does it have a reverse? Great reviews

    • @GurrasGarage
      @GurrasGarage  2 года назад +2

      Cheers 👍 No reverse but you just rotate the motor with the handle, very easy to do.

    • @crestlinerflyingcrest8694
      @crestlinerflyingcrest8694 2 года назад +4

      Mine just arrived - Someone message me in 8 months for feedback =). Thanks for the video!
      Update: 02/28/22 - Received the motor, it blew oil out of the exhaust and every crevice imaginable. Ran terribly.. I added premium fuel, oil and prop oil. Had to pump it out before shipping. Amazon seller is being an ass, I do not recommend this engine.

    • @corvettelifejones8625
      @corvettelifejones8625 2 года назад +4

      @@crestlinerflyingcrest8694 i have same engine on a motorized bicycle, runs great and very reliable. Sounds like you put too much oil in it.

    • @killercam4114
      @killercam4114 2 года назад

      @@crestlinerflyingcrest8694 how’s it doing?

  • @kidgamer8758
    @kidgamer8758 2 года назад +1

    Do you run it in fresh or salt?

  • @michteve222
    @michteve222 Год назад +1

    You should rust spray your nuts and bolts so they don't rust fully 🤟

  • @curtbennett8402
    @curtbennett8402 Год назад

    So you like the motor still? I am looking at the 6.5hp four stroke.

    • @GurrasGarage
      @GurrasGarage  Год назад

      I love it, and I might also upgrade to a 6,5 4-stroke next year

  • @user-bh4gb3pi4w
    @user-bh4gb3pi4w Год назад

    Full gasoline 4 people, silent water, how long can it ride?

  • @user-xj1jk4me8o
    @user-xj1jk4me8o Год назад

    هل تضيف زيت مع البنزيم

  • @kylebarcomb6192
    @kylebarcomb6192 Год назад

    Loud too

  • @pilaritomallillin4718
    @pilaritomallillin4718 Год назад

    Where can i procure or sold or buy? I like it.

  • @kittyztigerz
    @kittyztigerz 2 года назад +1

    get hose from auto part 8ft n plug into exhaust port run into water or zip tie it im sure it be quite once u done that

    • @GurrasGarage
      @GurrasGarage  2 года назад +1

      Might worth a try I guess

    • @kittyztigerz
      @kittyztigerz 2 года назад

      @@GurrasGarage auto hose dont melt i have try them on other stuff n vehicles have them for egr valve sensor

    • @GurrasGarage
      @GurrasGarage  2 года назад +1

      @@kittyztigerz Ok tested it but its not good. Motor will bog down and loose performance when you are blocking the exhaust, possible damage the motor also.

    • @kittyztigerz
      @kittyztigerz 2 года назад

      @@GurrasGarage sound like two stroke cant push it out of exhaust i see and thank information
      it will not damage engine but it will bog it out like it cant build compression
      i was looking around at other outboard engine it have small vent attach to big pipe that run down to propeller outflow and that small vent exhaust was make for idles or start engine when it come to full revving it go down out of the propeller outflow exhaust
      i will come around make one and show you what it would look like (cant this weeks because of strom is in my nerves too dangerous)

    • @GurrasGarage
      @GurrasGarage  2 года назад +1

      @@kittyztigerz this motor is 4-stroke

  • @RIVARDLAWNMAINTENANCE
    @RIVARDLAWNMAINTENANCE 20 дней назад

    I know it says 92 octane Gas in the specs but is that china conversion to where 92 octane is 87 octane in America

    • @GurrasGarage
      @GurrasGarage  20 дней назад +1

      @@RIVARDLAWNMAINTENANCE I use 95 octane, we dont have 92 or 87 in Sweden

    • @RIVARDLAWNMAINTENANCE
      @RIVARDLAWNMAINTENANCE 20 дней назад

      @@GurrasGarage would 91 work

    • @GurrasGarage
      @GurrasGarage  20 дней назад +1

      @@RIVARDLAWNMAINTENANCE probably

    • @RIVARDLAWNMAINTENANCE
      @RIVARDLAWNMAINTENANCE 20 дней назад +1

      @@GurrasGarage thank you bro I’m looking at getting the hangkai 4 stroke 7 hp appreciate your videos have a great day

  • @02bigkev
    @02bigkev 2 года назад

    If it's reliable then all good. did you catch any fish?

  • @paulwilkinson1738
    @paulwilkinson1738 2 года назад +1

    How long does a tank of fuel last

    • @GurrasGarage
      @GurrasGarage  2 года назад

      That is impossible to answer, depends on the size of your boat, how much it weigh, if you are alone in the boat, how fast you go etc.

    • @paulwilkinson1738
      @paulwilkinson1738 2 года назад +1

      @@GurrasGarage normal fuel review is flat out with you on your own just to get an idea.... not really impossible tbf, my apologies for asking just this video is only 1 i can find on this motor so will just have to find out for myself

    • @Francois_Dupont
      @Francois_Dupont 2 года назад +1

      @@paulwilkinson1738 normally they are calculated to last around 1hour at full throttle. just like motorcycle have a tank to last around 300kms.

    • @shelbyseelbach9568
      @shelbyseelbach9568 2 года назад +3

      @@GurrasGarage That is NOT impossible to answer! A tank of fuel lasts until it is all used. Easy and accurate answer.

    • @billslack1879
      @billslack1879 11 месяцев назад

      good one mate!@@shelbyseelbach9568

  • @FishinOnaMission
    @FishinOnaMission Год назад

    How is it now?

    • @GurrasGarage
      @GurrasGarage  Год назад

      Works fine, you can watch my playlist for updates

  • @strokerstang1
    @strokerstang1 2 года назад +1

    What state has 95 octane?

    • @GurrasGarage
      @GurrasGarage  2 года назад

      Sweden 😉

    • @THe9-3MAnIaC
      @THe9-3MAnIaC 2 года назад

      It's in USA close to 89-91 octane fuel. And nowadays, our 95 RON petrol contains 10% ethanol

    • @turbod15
      @turbod15 2 года назад +1

      @@THe9-3MAnIaC
      97 has e5

    • @THe9-3MAnIaC
      @THe9-3MAnIaC 2 года назад

      @@turbod15 Yes, because people are afraid of ethanol because they think that it destroy engines so they have to have something to choose between

  • @user-xj1jk4me8o
    @user-xj1jk4me8o Год назад

    هل هو جيد للاستخدام المياة المالحة

  • @markbrown7449
    @markbrown7449 2 года назад +2

    Some say these hangkai motors are pure crap, but I like taking chances on cheap stuff, just to see for myself. I know there are duds out there, but I haven't landed one yet. I need this motor like I need a hole in my head, but thats another matter

    • @GurrasGarage
      @GurrasGarage  2 года назад

      Mine works fine, so far so good 👌

  • @rainerneumeister5239
    @rainerneumeister5239 2 месяца назад

    Top speed 5 knots ?

  • @terryjoe323la
    @terryjoe323la Год назад

    Can a little motor go in the ocean

  • @banditnev
    @banditnev 2 года назад +1

    My chonda generator is noisy too. Chorda = Chinese Honda !

  • @thornyturtleranch6152
    @thornyturtleranch6152 2 года назад

    Why would anyone change oil every 10 hours. Sure okay, the first time but oil lasts way more than 10 hours. Especially with a little portion of an ounce of lucas oil stabilizer original. That thing will run hundreds of hours. Especially on low throttle.

    • @GurrasGarage
      @GurrasGarage  2 года назад +1

      I think you should because it holds only 240ml of oil and with no oil filter.

  • @kylebarcomb6192
    @kylebarcomb6192 Год назад

    Smelling the fumes all the way haha

    • @GurrasGarage
      @GurrasGarage  Год назад

      Thats impressive since you dont even live in the same country as I do 🤣

  • @MrjackieG
    @MrjackieG 2 года назад

    Good motor but noisy.

  • @TK-ec5bv
    @TK-ec5bv Год назад

    Torch spark plug, the very definition of poor quality. Their plugs are rubbish.