GOLDEN RULE WHEN CUTTING FORMED BASIN WORKTOPS | REAL WORLD PLUMBING Tips & Tricks
HTML-код
- Опубликовано: 2 дек 2023
- Plumbing tips and tricks....this one is a golden rule when cutting anything "Measure twice Cut once"
Real world plumbing as always on this channel and this video is the end of the cloakroom renovation hopefully...as long as the 4th worktop isnt broken.
#plumbing #tips #diy
Massive Thankyou to my channel sponsor UNILITE….
To save 25% on all Unilite orders type “MJTIFF” at checkout
unilite.co.uk/
Also check out the Trade Legends RUclips channel-
/ tradelegends
And head to the Trade Legends site for some massive discounts
tradelegends.uk/ - Хобби
Is the basin finally in 1 piece and fitted????
Dave’s a massive asset to plum base, a top bloke
Completely agree mate
Great job Mark. I have to say I am impressed with Dave from Plumbase, what a great guy! I wish our local plumbase was that helpful. Lovely looking job mate 👍👍😊😊
He’s spot on mate… really is, credit to the company.
Always goes that extra mile for us as customers👍🏼
Hi Mark, Yes the basin is finally in place, well done with the 60mm cut, some pressure on you there to get it right.
Nice to see Dave from plumbase looking after the customer, well done to all of you, another good looking install coming to an end.
Like you say, problems will occur, it’s how you deal with them that always makes the difference. Have a great week and as always take care, regards Chris. 👍👍👍
Exactly that mate….. it’s all about keeping the customer upto date 👍🏼👌🏼
Gawd Mark I was shitting myself when you were cutting that sink top, I was expecting to crack. Brilliant job done 👍. That was a nice touch from Dave with the bottle of bubbly and chocolates the customer was over the moon with the gesture 🙂👍
Yer he’s a good egg bless him…. It’s all about keeping people in the loop and telling them when things happen. Then make it right
Loving your vids mate, lots of inspiration, same approach to customers as myself...heart was in my mouth when you put the basin onto your Mac bench, noticed it wasn't locked lol had my bench for a few years now best bit of kit on my van
Thankyou buddy 👍🏼👍🏼
Good job, it was worth the pain and heartache.
Yer customer is over the moon with it now👍🏼
Well mark it turned out all right in the end ..you don't really want that sort of problem on jobs but out of your hands and makes the job drag on .
Nice of Dave to give them the presents. .
You need a good relationship with your supplier.
Yep it’s all done and sorted, Dave is a credit to the Plumbase team
Hi Mark. Finally got there. Just one of those things mate. Looks very nice. Have a good week 👍
Thanks buddy 👍🏼👍🏼
Congratulations 🎉 Mark on your final instalment of the cloak room Bathroom,
I’d say you’re delighted it’s finally done 😂
👍👍🤜
I bloody well am….. should of been done ages ago🤣🤦🏻♂️
Top man Dave, good man to have on your team. I bet you are over the moon Mark now this job is complete. Keep the good videos coming.
Indeed I am mate….🙌🏼
You can use a circular saw for resin…used one myself but need a fine blade. The grinder tends to create a lot of heat. Never ceases to amaze me how bloody heavy resin tops are😂
Yep I think I’ve done it that way before…. 👍🏼👍🏼
Got there very nice little utility room 👍👍👍👍
Thanks pal
What a performance but nice to have a laugh at the end of it all tidy job again Mark
Honestly mate…. Even the lady of the house is saying “You won’t want to work here again Mark”
i have been watching your videos for the last couple of years ,but recently i have stopped , the reason i have got sick of the annoying advertising during the vids
and the lenth of time they take. this was perfect no advertising and not to long . cheers
Thanks how RUclips works I’m afraid mate….
The ads are part of how RUclips makes money and in turn us as content creators earn money…. You can skip them….. and at the end of the day it’s all free to watch buddy
Funny looking van 😅
Rapid response unit…. VIP carriage
Thanks for that, Mark. It's one of those ones where logically, rationally you know it should be fine this time but, after all the luck you've had so far, you can't help wondering whether it might be an idea to get the local priest to perform a quick exorcism before you open the box!
So so true that 🤣👍🏼👍🏼
Diy temp door stop. 15mm metal insert. Long screw and a washer 👍
Door stop is now in place👍🏼👍🏼
Always need to check the centre of the sink as sometimes if there’s an overhang, you need to cut both ends
Was ok on this one👍🏼👍🏼
Great vid on a side note Silicious read up about it. Need wear mask n ear phones for Ur hearing. Concerned for you viewer
Where do you get the veto hoodies from ?
I would with Veto so I have some sent out… I will see if they are available anywhere…👍🏼👍🏼
They are very nice
I'm delivering a skip for mj tiff plumbing tomorrow hope might get to see you tomorrow get your autograph lol 😆
Change that sorry I'm collecting one from Kenilworth 😅
Hahahaa……. Collecting it from the job that’s been a right nightmare…. I nearly put my sled in that skip at one point mate 🤣🤣
However…. I do need a skip at my house for some bits…. I’m sure you can do me a deal mate😉😉… drop me a message
Like every job when finished its hard to see why it has taken so long! A worktop nightmare! Cutting it freehand was very brave but at least you didn't drop it carrying it into the house!!
Glad to get it done and dusted👍🏼👍🏼
Real world plumbing at its finest my friend 😂
Thanks buddy👍🏼👍🏼
No worries mate
Just stopped a van from being broken into out side my local hardware shop got the side door open but didn’t take anything?
Well done mate 👍🏼👍🏼
Don’t usually comment…nice watch this vid!
Thanks buddy…. Appriciate the comment mate👍🏼👍🏼….
You know what… I enjoyed putting this video together aswell….
You could of saved yourself a whole lot of hassle by telling the customer last week, "it's from IKEA, you have to assemble it yourself." 😂😂😂
🤣🤣🤣…… very true
🤘😎🤘
Evening mate 🙌🏼🙌🏼
@@MJTiffPlumbing Evening Buddy 🤘😎🤘
Link .... please
To what????
Should have a mask on, even if your mouth is closed it goes up your nose, looks really good
Yep I know what you mean 👍🏼👍🏼
I'd cut the wall. Things jinxed
🤣🤣👍🏼
That dust will not do your health any good
This job hasn’t done my health any good mate 🤣🤣
Out of interest has Velocity had the exposure they need so sacked you guys off? Appreciate PB hasn't had anything on for a while but seen you rocking the Veto jumpers on last few vids 🤔 Shame 😕
Ive never had anything to do with Velocity….🤷🏼♂️🤷🏼♂️…… I bought a couple of there bags a few years ago but that’s it…
I work with Veto… have done for a few months and they have sent me out some clothing…
@@MJTiffPlumbing ah fair play - seen you'd got a couple of bags a year or 2 back and made the wrong assumption 👍🏻
A lot of people do with people who make social media content….. people think we get given everything and promote it… it’s not always the case.
I know Pete works with Velocity but I don’t and never have.👍🏼👍🏼
Another real world plumbing. Told you not to throw away your trainers 😂😂😂😂😂😂😂😂
🤣🤣🤣🤣🤣🤣
Please wear a face mask next time you cut one of those!!!!!
👍🏼👍🏼
Hey messaging here for a chance to get a reply, saw your macerator pump vid, do you think it's a good option for a basement with only basin added to it and out of every 10 how many do you cone across for replacement.
Perfect for a basement buddy…. Just what they are for👍🏼👍🏼
Talk about milking a job.😅
Do you really think I wanted them to be broken mate 🙄🙄………