MY NEW MOTORCYCLE LIFT - Harbor Freight First Impression
HTML-код
- Опубликовано: 11 сен 2024
- MY NEW MOTORCYCLE LIFT... My wife surprised me on a tool I’ve wanted for a very long time a motorcycle lift! To some the Harbor Freight lift is a cheap lift that shouldn't be taken seriously. I on the other hand can tell you otherwise that this lift has everything to offer and more. In this video, I go over on my first impressions on the lift and highlight the features! Hopefully this helps anyone looking to pull the trigger on getting one in their garage!
Leave a comment below, and as always stay FREE my friends!
Follow me on social media:
Instagram: / jayfreeebird
Want a discount on motorcycle parts??
Use my code: FREEBIRD and get 10% off your order
tuckerspeed.com?sca_ref=553506.jsj7DKHqrU
at www.Tuckerspeed.com
00:00
01:01 Lift Ramp
01:50 Support screws
03:36 Wheel Chock
05:48 Operations of lift
06:46 Securing the lift
08:21 Trap Door
09:22 Final impressions
I brought one. The other day works fine just like you said I use it the same way you do. Thank you very much.
Great to hear!
Harbor Freight now makes an updated L shaped vise for a price of 79.99 . Its a must have i agree the vise that comes with it i wouldn't trust with a Harley-Davidson touring bike .
I've seen it, definitely a much needed upgrade. I ended up putting a K & L wheel Chuck on mine! ruclips.net/video/FTRgV7ke6DI/видео.html
Have the same table but had to make an extended wheel stop up front. Work on nothing but big tour bikes, and the standard stop puts the center stand on the drop-out panel. I don't use the clamp at all, it's just in the way. Roll on, sidestand, then ratchet straps.
Table itself is awesome & has taken a beating w/o a problem for years. One fallacy is the stop bar for locking it, unless they've changed it. Comes with a cheap tubing rod, I replaced that with solid steel. Recommend you do the same because when the cheap one bends you'll probably have to cut it to get it out.
Also, you mentioned using a scissor jack under the bike. Don't use the automotive style. get one for bikes like the BlackJack. I destroyed two auto style jacks that way & almost dropped a bike the 2nd time -and the rear wheel was off, would have been a huge mess. .
I appreciate the feedback and advice! Harbor Freight upgraded the pipe to hold the stand to solid steal and I got a motorcycle scissor lift from Black Widow, I love the setup now. Thanks for watching and commenting!
Your American flag is oriented the wrong way the stars should be on the left when hung vertically.
You are correct, I’ll be switching it today I appreciate the heads up! Thanks for watching!
@@freebirdsgarage no worries
Depends from which direction the wind blows!
Nice! I’ll be getting one of these pretty soon. Your vids are high quality, keep it up!
Definitely worth it! Makes wrenching 10x better 👊🏼. Thank you watching!
I've been using the harbor freight table for years with no issues. The one thing I did do on day one though, was change out that silly wheel vice for a Condor style locking wheel chock. Makes loading a bike on the table a one man operation. Most times don't even need to strap the bike down ...
I did the same on a follow up video and went with a K&L wheel chuck 👊
@@freebirdsgarage I used the harbor freight version lol .. figured it was going on a harbor freight table
Excellent review. I just put one of these in my shop.
Right on! Thank you!!
Great video man I’m picking one up myself tomorrow. But you gotta flip that flag around the right way
Thank you! I was informed right when I posted this video and got it flipped the right way after.
Nice ride. Dig the 2 into 1 pipe. I have had a Harbor Freight for many years. Still working like a charm. Yes, the front wheel vice is a pain. Subscribed, liked.
Thank you!! I appreciate the support!
A couple of modifications I've made is to weld the removable rear plate into place. I needed it to be solid to mount my frame jig to the platform. Also mounted better wheels in a wider stance to roll it around my garage without fear of it tipping over.
From another of your videos. I'll take your advice on mounting a 'roll-into' front wheel vise. Harbor Freight has them for $69 last time I checked.
Shiny side up, bro.
rocket
I have the Central Pneumatics motorcycle lift table from Harbor Freight, (the predecessor to the Pittsburgh) that came with the air/ hydraulic jack. After about 12 years of frequent use, the pneumatic pump gave out and I manually pumped it up for about a year. I eventually converted it to a hydraulic cylinder powered by an electric pump. It was a good lift. Now it's a great lift. I'm in the process of converting my other HF lift.
Here's the link to the video on the mods I did.
ruclips.net/video/T6eHjhZNkXw/видео.html
Good video Jay. I have the same lift. I added the drive up wheel chock that locks in place without having to adjust it. Simple mod. Keep on kicking ass man!
I’m thinking that’s the way to go on this one, better for storage in the long run too. Thanks for support my friend!
I guess if you had a center stand, like on my honda, as long as I tied the front down, I could use the trap door with no additional scissors lift. thanks for the video.
I ended up getting a scissor jack right after this. Thanks for watching!
I've had mine for years, i keep my kz 1000 on it 24,7 but it handles my road king just fine, the biggest problem it's got is when I drive my bikes on it you don't have a platform to step down from it or wide enough for your kickstand until you can strap it but its alright
You are spot on about that! Upgrading to a wheel chock instead of a vise will hopefully help with that. Thanks for watching!
Put a cinderblock next to the table where your sidestand comes down. The height works, it's strong enough, also gives you a place to put your foot while dismounting. Once strapped, move the block.
@@edsiler3260 That's a good idea for dismounting on your own!
@@edsiler3260 I use a piece of 4 x 4 timber, lighter and kinder than a cinder block.
Bought one 15 years ago. Still working just fine. My Guzzi has a center stand which I use on the lift.
I didn't realize they had them 15 years ago! Thanks for commenting!
The center stand is one of the many reasons I bought a Guzzi. I now have 3. 2 Cals and a Quota for playing in the dirt. I also have the Central Pneumatics motorcycle lift table from Harbor Freight, (the predecessor to the Pittsburgh) that came with the air/ hydraulic jack. After about 12 years of frequent use, the pneumatic pump gave out and I manually pumped it up for about a year. I eventually converted it to a hydraulic cylinder powered by an electric pump. It was a good lift. Now it's a great lift. I'm in the process of converting my other HF lift.
Here's the link to the video on the mods I did.
ruclips.net/video/T6eHjhZNkXw/видео.html
Very cool. I have been looking at these for a while now. Even more so after doing my first oil change. Not a fan of having to get that low on the ground anymore. haha Good to see it is a decent lift. 🤘
Hahaha right! Better then being bent over trying to wrench and for the price point. It’s a great fit for a garage, thanks for watching sir!
Could we get a up to date review on this lift fam?
Soon!
@@freebirdsgarage have you made one yet?
just subscribed. Would be nice if you did a follow up video. Did you swap out the front wheel lock for the better vice accessory. I have a BIG bike 870 pounds wet. I'd have to put a platform or rail system on both sides of the lift on the floor.
Yes! I actually did another video on replacing the chuck with an K&L. Check it out and see what you think. I appreciate the support 🙏 and thank for you the sub!
Just a mention that the flag should have the stars on the left if you hang it like that. Thanks for the vid.
I flipped the flag after being told by many after this video was posted. I appreciate the feed back and thanks for watching!
Flying a flg the wrong way is a distress signal.
@@therealrobertbirchall Flying a flag upside down is a distress signal.
@@tklykun9858 so can you tell if the butchers apron is upside down?
@@therealrobertbirchall en.wikipedia.org/wiki/Flag_protocol
I didnt catch the how much and any and every review would include that. I must have missed it.
I didn't mention it, because in the start of video I said it was a gift from my wife. But it was a father's day special which I believe goes for $299.00
Did you add the black rubber pads on the pump handle and lowering arm?
No those came from the factory. I believe earlier models did not have them
Do you normally ride it on, or push it on ? How do you manage to secure the bike by yourself ?
I push it on all time when I use it
@@freebirdsgarage I wish I could make this lift work for me. There’s No way I could push the Road King up that ramp.
@@wb4514 you definitely can ride it up I’ve seen done and with RK. Just make sure the jack stands up front are secured down
@@freebirdsgarage OK, thanks. Do you mean the leveling bolts in the front?
@@wb4514 yes sir those ones
nice FXR
Thank you!!
How to order and how much...thanks
Harbor Freight and check your local one for pricing
......and you said it cost how much?
Check my response from your other comment
How do you do any front end work with the wheel chuck in the way?
You have to have a scissor lift in order to lift it up! Thanks for watching!
I tie the bike in the back with 6 tie downs. 2 to keep the bike upright, 2 pulling the bike forward, and 2 pulling the bike backward. That way the bike can't roll in either direction. Then I jack the front of the bike up to service the front end.
How much?
This one was on sale for $450ish
The foot pads are upside down
Interesting, I checked and that's how the new ones come. They've made little changes over the year's that could be one of them. Thank you for watching!
Hey man, your American flag is hanging wrong, stars are supposed to be on top left.🍻
I know, right after this video I flipped the flag after being told by many. I appreciate the feed back and thanks for watching!
Great video
Your American Flag is displayed incorrectly
Correct, it was flipped after this video was posted. I appreciate the feedback and thanks for watching!
Sorry pal, that lift is poops.
😎
Dude… if you’re gonna display the American flag, learn how to do it properly!!!
It was changed right after the video was made, look at my other videos. Thanks for watching!
Great video How wide is the deck? Most importantly with the bike centred is the deck wide enough to allow the kickstand to be used? I can see it's down in the video but the bike is straight up
Thank you! You use the kick stand, but it really depends on the bike weather or not it's going to fit.