@@henriquepardinihurtig i know they speak spanish and yall speak portugese 🤣 but to us its basicly the same things . Sadly media/movie does not paint brazil ( or colombia ) in a really good way . Cheers my friend !
@@dateg18 there's not much info on these I can find on RUclips. I see a few videos only made power to 8100. I just got my hand on these too and had doubt. Doing hpde so I want a little more low-end without the maintenance.
There are tons of info on the tsx cams the 06-08 tsx cams are the ones you will benefit frm some ppl have used the tsx intake cams and itr exhaust cams for better results. The tsx cams will run out of steam around 8700rpms as oppose to any k20 cams which will run out around 8krpms there are ppl making well over 800hp with stock k20 cams but the bang for your buck drag cartel 2.2 and prayoonto stage 2 cams will benefit more with stock compression
Asaa racing did the tune and the mid range power and tq is so much better with tsx cams then the stock z3 cams for me I time attack the car and I need all the tq I can get to pull the car out of the corners
@@stickboyfpv4742 lol my set up is with oem stuff nothing crazy i do have skunk 2 vale spring kit I auto cross the car Im still using a stock flywheel with stage 2 clutch so 😅I don't have the crazy rev bang like must ppl do with build motor
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Don't rev past 8400 if your still on the stock oil pump the engine will seize or will rodknock eventually
I'm running a ported type s pump by drag cartel
@@dateg18 do they come already foxed to fit ?
@@jaym6187 also interested in this
Wish my car sound like that💪🙈
Rad
what tsx cams fits the z3 head ?
04-05 and 06-08 tsx cams work great I have a set of 05 tsx cams for sale just hit me up
@@dateg18 so the fit without changing anything else?
@@Nikko-zi3ti they drop right in all u need to do is put ur 50°vtc gear on and that's all
@@dateg18 do i need a tune?
@@Nikko-zi3ti for the tsx cams I would say yes just to get a lil more power from them but you can run them with a tune just fine
Wow👌
I have a Civic Si Black fa5 in Brazil for 3 years. 🇧🇷✌🏼
bom eu tenho família lá
Damn y'all have honda civic in brazil ? Genuine question cause we have alot of colombian here and they dont have these kinds of cars
@@pcostyle11 we're not colobians bro , theres a lot of cool cars in brazil
@@henriquepardinihurtig i know they speak spanish and yall speak portugese 🤣 but to us its basicly the same things . Sadly media/movie does not paint brazil ( or colombia ) in a really good way . Cheers my friend !
@@pcostyle11 hahhah understood , cheers my friend , i'm moving to usa next year 😁😁it's much better than here
Hp/tq?
Car made 246whp 176tq on oe tsx cams
@@dateg18 very nice 176 tq is really good I made 235 165 I may have to get a set of TSX cams should put me at or over 250
@@dateg1806-08 cams? 93 octane?
Do you have a catalytic converter?
Did you make power all the way pass 8k?
The car made power all the way to 8500rpm the cams are ok for what they are just oem cams and the vtc gear helps alot at 40° timing
@@dateg18 there's not much info on these I can find on RUclips. I see a few videos only made power to 8100. I just got my hand on these too and had doubt. Doing hpde so I want a little more low-end without the maintenance.
There are tons of info on the tsx cams the 06-08 tsx cams are the ones you will benefit frm some ppl have used the tsx intake cams and itr exhaust cams for better results. The tsx cams will run out of steam around 8700rpms as oppose to any k20 cams which will run out around 8krpms there are ppl making well over 800hp with stock k20 cams but the bang for your buck drag cartel 2.2 and prayoonto stage 2 cams will benefit more with stock compression
is this running on a tune ?
Yes I'm running ktuner v1
Thanks for the Video Tony. I picked up some TSX cams also. Did you do the install?
Yes I did the install myself it was not to bad
@@dateg18 Did you notice any gains, or personality change after the cam install?
@@jesselee4405 there a big difference in mid range power
@@dateg18 I've been looking at cams on ebay. Thinking about TSX just for something to do. Thanks for the feedback.
@@jesselee4405 np
Who did your tune? How does it fill compared to stocks z3 tru all power band?
Asaa racing did the tune and the mid range power and tq is so much better with tsx cams then the stock z3 cams for me I time attack the car and I need all the tq I can get to pull the car out of the corners
Mine must be cammed🤣 cus she sounds and looks dead nutts 100% the same! 06!
@@stickboyfpv4742 lol my set up is with oem stuff nothing crazy i do have skunk 2 vale spring kit I auto cross the car Im still using a stock flywheel with stage 2 clutch so 😅I don't have the crazy rev bang like must ppl do with build motor