Okay just got my mags,speedloader and mag sleeves, all in one go from the mail lady, what timing :) everything is a snug fit so it wont come off if you toss the mag around like that. Couldnt be any happier with how well everything fits and feels
Just bought one. Supposed to be in the mail in a couple hours. Now just gotta wait on the 15 round mag, supposed to be here tomorrow. Can wait to try it out
Just went to your link, and ordered one....just what I needed for my 15rd CPX mag. I've have inner-tube strips wrapped around it. This is so much better. Thanks for offering these 👍😆
Inner-tubes wrapped around your grips is an old-school econo-fix! You're right....ya gotta do what ya gotta do! The bare magazine was very uncomfortable 😂
Works well. Fits my DVG-1 just great. Also, the extra power wolffgunsprings for the S&W 5906/4006 mags works perfectly in the promag 15 round SCCY mags. Runs like a champ.
Nice! Thats pretty cool. I didn't know they even had other mags for the sccy!! I learned something new!! Thanks amigo. Now i gotta buy myself a sccy pistol!!
I bought a sleeve and a loader and they works great...the sleeve is so snug it actually fits on the 32rd without moving down...i will be ordering another sleeve for my 15rd 🙌🏾
Permit just came in. Buying a sccy this week and i definitely would love to purchase one of these in the next few weeks! Killer price. Thanks for filling this niche!
Makes my 32 Rd mags look alot less awkward , had to wrap a little tape below them to prevent recoil sliding but it still looks alot better and it feels more comfortable to hold than the stock 10rd mags with the finger grip base I'm definitely going to buy a couple of 15 Rd mags and buy 2 more of these sleeves ... Thank you @bloodywheels for designing these with comfort in mind and im sure people with bigger hands also appreciates you
cem40 thank you! I wish I could design a sleeve specifically for the 32 round mags. But there is nothing on the mag to keep the sleeve from sliding down. Some mags have nubs on the side. This 32 round mag has none
Westcoast Livinlife thanks west coast! The 32 rounder is more difficult to design. Due to there being no baseplate to stop the sleeve from sliding down when the mag is inserted in the firearm. I’m trying to think of an idea to remedy this issue so I can offer some sleeves for those.
@@bloodywheels ok just a thought. I guess epoxy if the owner doesn't mind making it permanent or silicone that can be broken easily. Again just more thinking.
arnold scwarznegger thanks Arnold! My favorite actor too! Yes. It works on the 32 round, although when you insert the magazine, it will move the sleeve down. I am trying to come up with a solution to remedy this issue so I can offer a 32 round sleeve. I appreciate your business!!!
@@bloodywheels lol awsome. It does push it down a bit but still fits great in the hand. When the 32 round mag sleeve comes out i will buy that one too!
I've bought, struggled thru the add on (I'm a doof) , as there are NO written instructions, but am placing an order for more, as I love them ! There IS VERBAGE INSIDE the sleeve, keep to top... notch to rear of grip.... I approached from the bottom, removing the mag beavertail, and tapping on to fit. Had issues of bad / no feeds (spring reseated wrong initially ?) , but went thru several manual recycles of cartridges... they feed fine now... Am thinking of installing the sleeve from the top of mag, to not disturb the mag feed spring... we'll see...
Hi Rick! I’m afraid I do not understand your issues. You are installing the sleeve from the bottom? Just like the video shows, sleeves slide down the top of your promag 15 round magazine, and the mag goes into the firearm. There are no written instructions, because it’s just that simple. I’m just wondering why you are removing the baseplate to install the sleeve from the bottom. Unless I am missing something in your message.
MrScottJ87 hi mr Scott!! That would be cool! Unfortunately I couldn’t make a sleeve for it. I don’t own the .380 and I do not have access to one for design work.
Yo I ordered a mag sleeve off eBay from you... I never had an EBay account I ordered it as a guest.. now I can't track my package and I'm nervous ASF... Really looking forward to getting this mag sleeve
@@trapboiii843 I would need a name or order number to look up your information. eBay still should have emailed you the tracking information to the email used when checking out as a guest.
Hello i am ordering multiple colors online for my 15 round mag. you plan on making a longer one that fits the 32 mag? Or can you custom make them for your customers?
Picking up my CPX2 in couple days, bummed they didn't have other mag options besides the 10, but I knew I'd find one sooner or later, and that 32 mag looks ridiculous!! I'm going to buy a 32 anyways. Could you make a sleeve for that and taper the ends off to match the finger endcap?
xBloodxHoundx hi there! I make a sleeve for the 15 rounder, which will technically fit on the 32 as well. But...there is nothing to keep the sleeve from sliding down the 32 round mag. So I am currently trying to figure out a sleeve design for it.
xBloodxHoundx I tried. The mag can be inserted pretty far. Even screws in the front and rear of the sleeve will not hold the sleeve when inserted. So no matter how snug, the sleeve will move. Hard to explain unless I show it. I still have my thinking cap on though.
Is your Sleeve made Solid PLA? or does it have hollow areas/ channels? I got one of these ,from a competitor of yours, and I was sanding it to match up the grip ,and found it has hollow areas in it.why wouldn't it be Solid Plastic,PLA?
Which pro mag (15 round) magazine is it for this pistol? I found some pro mag 15 and 18 round mags but I’m not sure which one will work, if any. Can you tell me specifically which mag will work for it? Thanks
BT ennis hi there! There is only one that I know of for this firearm. Made specifically for the cpx1/cpx2. When you search, search sccy cpx promag 15 round magazine.
Jaelen Carrethers hi there! Many online retailers sell them more than likely. Google search may bring up a few places, if they are not already sold out.
I Like this CPX-2 9mm. I don't shoot it much it was a Gift but it's little bit to little for me I do like that 15rd and 32rd mag I never seen that before for this tool. Thanks for sharing the info.
I4gotGaming x2 hi there! You do not need the sleeve for your magazine to function. The sleeves just makes it more comfortable and fills the gap to look a lot better.
Anthony The Rapper hi Anthony! Not yet. I’m trying to come up with one. There is nothing on the 32 round mag to keep the sleeve from falling down when inserted in the pistol. I’ve tried a few different methods without success. But I’m still in thinking mode. I hope to come up with something.
Devin Holland pla is way too brittle and will warp if you leave it in the heat like the sun. PETG is too expensive but good option. Abs is durable and relatively inexpensive.
Jaelen Carrethers hi there! After purchase, there is a one day handling time. Then your package will be shipped out usps first class. First class typically takes 3-5 business days. May be longer is usps delays, which is happening across the US right now. Purchase late made this weekend will be shipped out Tuesday, as Monday is a holiday and usps is closed.
My dvg has the same grip like for like will it fit?
We cannot confirm fitment on the DVG1. Hopefully someone else can chime in who has tried them on a DVG1
@@bloodywheelsDoes shipping usually take as long as 2 weeks? I ordered a sleeve for my 15 round mag and have yet to receive it.
I got my 15 rd promag and the sleeve I love this set up . Makes the gun fit so much better in my hand..
From were can u tell me
These sleeves are awesome. Makes the grip feel much better. They work perfectly and shipped super fast. Highly recommended.
I have been waiting for someone to offer these sleeves.
Nathaniel Tenney hi Nathaniel! I wondered why no one didn’t too. I took the opportunity.
Okay just got my mags,speedloader and mag sleeves, all in one go from the mail lady, what timing :) everything is a snug fit so it wont come off if you toss the mag around like that. Couldnt be any happier with how well everything fits and feels
I got the sleeve in the mail before the magazine, very fast shipping. I’m excited to put them together and send a few rounds. Thank you
Daryl Hayden that’s great to hear Daryl!
Just bought one. Supposed to be in the mail in a couple hours. Now just gotta wait on the 15 round mag, supposed to be here tomorrow. Can wait to try it out
Just got my 15rd sleeve for my pink sccy, gave me more control and comfort, thanks!
That’s great to hear!
Thank you so much.
We truly appreciate your business.
Just went to your link, and ordered one....just what I needed for my 15rd CPX mag. I've have inner-tube strips wrapped around it. This is so much better. Thanks for offering these 👍😆
mark shippoli inner tube huh? You are devout lol. Gotta do what ya gotta do right?
Thanks mark!!
Inner-tubes wrapped around your grips is an old-school econo-fix! You're right....ya gotta do what ya gotta do! The bare magazine was very uncomfortable 😂
Works well. Fits my DVG-1 just great. Also, the extra power wolffgunsprings for the S&W 5906/4006 mags works perfectly in the promag 15 round SCCY mags. Runs like a champ.
Just ordered a black sleeve for my pro mag 15 rd . From bloody wheels Can’t wait to get it it looks way better with a sleeve
Thank you! I appreciate your business
Nice! Thats pretty cool. I didn't know they even had other mags for the sccy!! I learned something new!! Thanks amigo. Now i gotta buy myself a sccy pistol!!
UxSx ONLY hahaha. Sorry to make you spend more money on guns.
@The Commentator Named OREH i gotta get myself a sccy then!! Appreciate the heads up!!
The Commentator Named OREH yep! Got that one too! Thanks commentators.
Checkout the new red dot sccys. I have the base model cpx-2 and it's nice but now I want the red dot version.
Allen McKinney I saw that! I love all these company’s coming out with new products that are still very affordable.
I bought a sleeve and a loader and they works great...the sleeve is so snug it actually fits on the 32rd without moving down...i will be ordering another sleeve for my 15rd 🙌🏾
Very cool Daryl! I appreciate your business!
Received mine today it looks amazing ordered Monday received today couldn’t be happier 🤪
Permit just came in. Buying a sccy this week and i definitely would love to purchase one of these in the next few weeks! Killer price. Thanks for filling this niche!
xxmisunderstandingxx thanks for the comment! Definitely a great price these pistols are selling for.
How's the sccy treating u
Just bought one from you and love it. Thanks bloody wheels..
Makes my 32 Rd mags look alot less awkward , had to wrap a little tape below them to prevent recoil sliding but it still looks alot better and it feels more comfortable to hold than the stock 10rd mags with the finger grip base I'm definitely going to buy a couple of 15 Rd mags and buy 2 more of these sleeves ... Thank you @bloodywheels for designing these with comfort in mind and im sure people with bigger hands also appreciates you
cem40 thank you! I wish I could design a sleeve specifically for the 32 round mags. But there is nothing on the mag to keep the sleeve from sliding down.
Some mags have nubs on the side. This 32 round mag has none
I just ordered 2 of these sleeves from you yesterday on ebay awesome!
Thank you! I appreciate your business
Just recently bought the sccy cpx-2 and was thinking of getting a 15 rd mag once I seen this im definitely going to be getting one.
where do you find the 15 rd mags?
Just ordered one, I look forward to it and appreciate your services sir
Just what I needed I’ll be buying two tonight. Now we just need a sleeve for the 32 round mag
Westcoast Livinlife thanks west coast! The 32 rounder is more difficult to design. Due to there being no baseplate to stop the sleeve from sliding down when the mag is inserted in the firearm. I’m trying to think of an idea to remedy this issue so I can offer some sleeves for those.
@@bloodywheels try a grub screw through the sleeve with the screw tip going into a slightly smaller hole in the side of the mag.
Allen McKinney thank you. yep. I’ve tried that. It still will not hold.
@@bloodywheels ok just a thought. I guess epoxy if the owner doesn't mind making it permanent or silicone that can be broken easily. Again just more thinking.
Allen McKinney yea I appreciate that.
Electrical tape below the sleeve works great. And gives it some cushion.
But most wont be happy with using tape.
Thank you so much i just ordered from you and got it in the other day and i am very pleased. Thank you so much i ordered two g3c and my cpx2
Very Nice job on the sleeve!
Thank you so much!
Just got one, sits perfectly fine on the 32 round mag aswell, good purchase
arnold scwarznegger thanks Arnold! My favorite actor too!
Yes. It works on the 32 round, although when you insert the magazine, it will move the sleeve down.
I am trying to come up with a solution to remedy this issue so I can offer a 32 round sleeve.
I appreciate your business!!!
@@bloodywheels lol awsome. It does push it down a bit but still fits great in the hand. When the 32 round mag sleeve comes out i will buy that one too!
Where did you find the 32 round mag?
bloodywheels where can I find a 32 round mag?
@@austinhaworth418 online sites but mine turmed out to be no good
Just ordered waiting until 21st for shipping to open back up
I'll be ordering soon, I just got my 3rd Sccy.
I've bought, struggled thru the add on (I'm a doof) , as there are NO written instructions, but am placing an order for more, as I love them !
There IS VERBAGE INSIDE the sleeve, keep to top... notch to rear of grip....
I approached from the bottom, removing the mag beavertail, and tapping on to fit.
Had issues of bad / no feeds (spring reseated wrong initially ?) , but went thru several manual recycles of cartridges... they feed fine now...
Am thinking of installing the sleeve from the top of mag, to not disturb the mag feed spring... we'll see...
Hi Rick! I’m afraid I do not understand your issues. You are installing the sleeve from the bottom? Just like the video shows, sleeves slide down the top of your promag 15 round magazine, and the mag goes into the firearm. There are no written instructions, because it’s just that simple.
I’m just wondering why you are removing the baseplate to install the sleeve from the bottom. Unless I am missing something in your message.
I just received my sleeve now just waiting for the magazine to come in.
Thank you! I appreciate your business
Thanks man I just received my sleeve it was so fit it’s awesome 😎 we thank you so much 😊
i have a cpx 3 - 380acp cant wait till they make an extended mag, hopefully you can make some for when they do.
MrScottJ87 hi mr Scott!!
That would be cool!
Unfortunately I couldn’t make a sleeve for it. I don’t own the .380 and I do not have access to one for design work.
Just ordered mine soon as i got a quarter of the way through the video. The promag is on the way as well 👌🏾
Just got my order for the CPX 2 fits great feels great Thanks, ( 6-26-22) 😀
Looks amazing bro good job 👍
Imyourpapi thanks papi!!
Como puedo comprar uno
I have the same exact gun beck yeah and was looking for a bigger mag around where I live could not find hardly any stuff for the sccy 9mm
Just ordered the sleeve‼️
this is so fire! def grabbing one soon
The link to my website is in the video description
Yo I ordered a mag sleeve off eBay from you... I never had an EBay account I ordered it as a guest.. now I can't track my package and I'm nervous ASF... Really looking forward to getting this mag sleeve
@@trapboiii843 I would need a name or order number to look up your information. eBay still should have emailed you the tracking information to the email used when checking out as a guest.
Hello i am ordering multiple colors online for my 15 round mag. you plan on making a longer one that fits the 32 mag? Or can you custom make them for your customers?
@@bloodywheels I just saw your other video Nevermind mate. Lol I would’ve paid top dollar. The 32 would be cooler if there was a grip for it
We’re can I get the 15 round from
Picking up my CPX2 in couple days, bummed they didn't have other mag options besides the 10, but I knew I'd find one sooner or later, and that 32 mag looks ridiculous!! I'm going to buy a 32 anyways. Could you make a sleeve for that and taper the ends off to match the finger endcap?
xBloodxHoundx hi there! I make a sleeve for the 15 rounder, which will technically fit on the 32 as well. But...there is nothing to keep the sleeve from sliding down the 32 round mag.
So I am currently trying to figure out a sleeve design for it.
Some sort of light application of adhesive should do the trick. Or make it more of a snug fit. A few ideas for you.
xBloodxHoundx I tried. The mag can be inserted pretty far. Even screws in the front and rear of the sleeve will not hold the sleeve when inserted. So no matter how snug, the sleeve will move.
Hard to explain unless I show it.
I still have my thinking cap on though.
Will be ordering 2 of these
Joe Brown thanks joe!!
So you can put a 32 round magazine on a CPX-2 ? First time buying one !
This is why I’m gonna by a sccy now.
one can use a S&W 59 series mag to make a 15 rd mag for a Sccy. I hear.
Like your products!
I'm concerned that the factory mag spring will not be able to handle the extra 5 rounds for very long and could cause failure to feed.
Did you start making any other colors yet???
Yes check his site i bought a red one. It's the first comment
Hey I was on your website I couldn’t find the 15 round mag
Hi there! I do not sell any magazines at all. Only the sleeves.
I have a SCCY but I need one for my Bersa 380
Extended mag
Hi there!
We do not offer any products for the Bersa firearms. So sorry.
Also I didn’t even know they offered 15rnd magazines bth the way lol.
Rogue Video Productions hi there! Sure do! Too bad only promag is offering them.
Also do you think you can make something for 7 round cw380 magazine???
Is your Sleeve made Solid PLA? or does it have hollow areas/ channels? I got one of these ,from a competitor of yours, and I was sanding it to match up the grip ,and found it has hollow areas in it.why wouldn't it be Solid Plastic,PLA?
Do you still make them I just ordered one through your website
Which pro mag (15 round) magazine is it for this pistol? I found some pro mag 15 and 18 round mags but I’m not sure which one will work, if any. Can you tell me specifically which mag will work for it? Thanks
BT ennis hi there! There is only one that I know of for this firearm. Made specifically for the cpx1/cpx2.
When you search, search sccy cpx promag 15 round magazine.
@@bloodywheels thank you I am going to order two 15 round magazines & will order 2 sleeves from you.
The SCCY CPX-1 Gen 3 doesn't have grooves/finger hooks anymore.
Do you happen to make extensions for the mc1sc?
Christopher Whiting hi Christopher! No. I had plans to at one time. But I do not have access to that firearm yet.
How much is the blueprint I have a friend that 3d prints and was wanting a color she has?
Will a 15 round magazine, fit the DVG1?
Looks dam good
BEAUTIFUL
I would like to order one for a cpx.Whats the process
Keith Blake hi Keith!
The sleeves I sell in my website. The link to the website is in the video description.
They make a drum for it now
I want it rn 😭😭❤️
Where can I get a 15 round mag from?
Jaelen Carrethers hi there! Many online retailers sell them more than likely.
Google search may bring up a few places, if they are not already sold out.
Thank you I appreciate that
I Like this CPX-2 9mm. I don't shoot it much it was a Gift but it's little bit to little for me I do like that 15rd and 32rd mag I never seen that before for this tool. Thanks for sharing the info.
corey taylor thanks Corey! Being a gift makes it even cooler.
Are you making anymore of these now? I bought one off of Ebay but, don't see them on there anymore. Are you selling someplace else now?
Hi David! They are still on eBay. I do sell them also on my own site. The link to the website is in the video description.
Ok just found your website. I had a serious brain fart moment here. Sorry.
Nice n how would I be abel to get 1
Is there a extended mag for a SCCY CPX 3 .380? Any information would be appreciated thank you
I’m not sure about the .380. I wish I knew. So sorry.
Where can i get a 32-round for my cpx-2.
Nayshawn Watson hi Nayshawn!
Many online retailers should sell the 32 round mags, unless they are sold out. I think mine came from grabagun website.
Have you thought about updating the design to flow a little better with the bottom of the magazine?
Rest of it looks great.
Do you have any 15 round mags still Available? Would definitely like to purchased that along with the sleeve
Omar Robbins hi Omar! I do not sell magazines. Only the sleeves for them.
Oh ok, would you know where I can find one by any chance?
Omar Robbins I think I found mine either at midwayusa or grabagun website.
Thanks I’ll check it out
Anyone know the length of the gun now when adding the 15 round mag? Trying to compare it to like a Glock 43x size?
Nice bro
i love it bro i will need some o yes bro think
Is the cpx2 magazine compatible with the dvg1?
That I do not know Kenny.
Are you willing to sell the 32 round man I can’t find one. The wee side been out of stock for about 3 months
Hi Shawn. No, so sorry. This one I have I am keeping.
So what if I don't use the sleev like. Do I need it
I4gotGaming x2 hi there! You do not need the sleeve for your magazine to function. The sleeves just makes it more comfortable and fills the gap to look a lot better.
What printer do you use to print these pieces?
What website can I order the magazine from
Do you make a magazine sleeve for the 32 round magazine? Asking for a friend.
Anthony The Rapper hi Anthony! Not yet. I’m trying to come up with one. There is nothing on the 32 round mag to keep the sleeve from falling down when inserted in the pistol. I’ve tried a few different methods without success. But I’m still in thinking mode. I hope to come up with something.
Why ABS instead of PLA or PETG?
Any way to just get the Stl?
Devin Holland pla is way too brittle and will warp if you leave it in the heat like the sun. PETG is too expensive but good option. Abs is durable and relatively inexpensive.
@@bloodywheels any way to just buy the STL?
Devin Holland no sir. I keep all my designs to myself.
Quick question I’m about to order the 15 round mag sleeve how long does it take to come in ?
Jaelen Carrethers hi there! After purchase, there is a one day handling time. Then your package will be shipped out usps first class. First class typically takes 3-5 business days. May be longer is usps delays, which is happening across the US right now.
Purchase late made this weekend will be shipped out Tuesday, as Monday is a holiday and usps is closed.
Where you get the 32 round
Ttg Dukio hi there! If I remember correctly, mine came from grabagun website.
Bro how can I get a mag sleeve?
Where can I find a 32 round at?
How do I buy one please
Hi Chris!
The link to my website is in the video description.
Can a sccy cpx1 extend clip fit a sccy cpx2?
ilovegames1994 it should. The only differences between the two are a safety on the cpx1 and no safety on the cpx2.
How much for a sleeve?
Do the 32 round jam?
Tysaiah Witcher hi Tysaiah! Some do, some don’t. With promag you never know what you are going to get. They are not known for their reliability.
Video on 15 round mag review at range??
Thomas Rebmann hi Thomas!
I haven’t done any range reviews. Good idea for a future video though.
Absolutely! Would love to know how it functions, will be following.
I just bought this gun.
NICE!! Thanks :)
James K. Thanks James!!
How can I order the sleeve
Hi Jeremiah!
The link is in the video description.
What's the brand
You sir will be receiving my business very soon sir.
15 rounds please
Can I order that
Promise Stroud hi there! Yes. The sleeves are available on my website. The link to the website is in the video description.
How can I get one
Tru blue Kennels hi there! The sleeves can be found at my eBay store. The link is in the video description.
Ok thanks do u have the 15 round mag also
Tru blue Kennels no magazines. I only sell the sleeves.
how do i order it
ja bixl the link to the sleeve is in the video description.
I'll take two please.
That’s great!
The link to my website is in the video description
Can you make a mag dump video
Havent shot in a while. Been super busy with business. There are no plans for a shooting video.
Nice