Veken Bidet Toilet Attachment: How to Install Step by Step (Perfect!)
HTML-код
- Опубликовано: 1 авг 2024
- Here is a step by step tutorial on how to install / setup the Veken Ultra-Slim Bidet: (amzn.to/3qQ8hYb). Hope this helps.
Veken Ultra-Slim Bidet, Non-Electric Dual Nozzle (Posterior/Feminine Wash) Fresh Water Sprayer Bidet for Toilet, Adjustable Water Pressure Bidet Seat Attachment with Brass Inlet: amzn.to/2ZkUbT3
Amazon Daily Deals: amzn.to/2QVcoRC
----My Gear for RUclips videos----
Main Camera 99% (smartphone): amzn.to/2utQFGH
Tripod: amzn.to/2xxpKcw
Cell Phone Tripod Adapter: amzn.to/2iM4Kw5
Selfie Stick/Tripod: amzn.to/2iK2Agu
Microphone: amzn.to/2xTAw13
Lights: amzn.to/2xVa5Ic
Electric Desk: amzn.to/2LLyzqU
Dual Device Tripod Setup w/ Hand Grip : amzn.to/2sOXuC2
Cheap Video Editor: bit.ly/2HdAMb7
Business inquires: WorldofTech11@gmail.com
Twitter- / worldoftech11
Disclaimer: The above links are affiliate links meaning if you buy products using those links i will receive a small commission.
Also i am not responsible should anything go wrong so do at your own risk! - Хобби
This is how you do instructional videos! Straight to the point, no flashy nonsense. Perfect! 10/10 kudos!!
Just tried a second time to install mine, this time with the suggested teflon tape. It absolutely made the difference, no leaks anymore!
Straight to the point. No mumbo jumbo or annoying background music.
Very helpful video. Thanks so much! 👍👍👍👍
I hate when RUclips videos do that.
Omg you made it all so clear! I’ve been stuck for two days, I’m not a handyman or handywoman. I’m dyslexic to boot so I’m always having issues tightening bolts, screws etc. My bottom thanks you for this awesome tutorial. God bless. I subscribed!
Great addition to the factory instructions. I am only a DYI handyman but a pro plumber told me not to add teflon tape to a juncture that has other rubber seals. It only interferes with proper thread seating.
Damnit. I should have read the comments first 😂
Yep, I had to remove the teflon tape.
Can't thank you enough. I installed it by myself by looking at your video, and it's working well. Jumped out of joy like I achieved something big in life 😂 Thank you!
The tape helps. On my own I was gushing water everywhere. This video helped tremendously. I'd been down to 1 toilet for a week until I thought to youtube!😅
A great addition to my bathroom. I love the freshness you feel with the cool water. I didn't have to use the tabs
Absolutely clear instructions. This took me a little over ten minutes (based on a rewatch) and i didn't have to hassle my handyman dad even ONCE.
Had a moment where I despaired that the holes in the toilet were too close together. Worries in the land!! ...until I slowly rotated one bracket to reveal a hole 😂😂
can't wait til my father sees my handiwork! Thank you!
And tbis attachment js awesome. With my current water pressure, the lowest setting is just fine.
Omg thank you SO MUCH!! We kept on thinking of needing to removal the main pipe hose and your video here literally helped us install it.
*Wow! A toilet seat I actually feel enthusiastic about and it **Looks.Luxury** , So quiet! So sleek! So durable! I love her.*
Wow! Short, sweet, and to the point! I feel more confident getting a bidet now. Now if I can figure out where the water turns off, I'd be set!
This was a simple to the point fast easy to follow along tutorial. Thanks so much! Worked great for me!
Thank you so much for posting this video, it made my job installing the one we bought so much easier.
Excellent instructional vid. Clear, short and to the point.
Excellent!!!! I just installed one like this today and your vid helped me see what I did right and wrong. Thanks!!!
Thank you very much for taking the time and doing the demo. Much appreciated! Looks like plenty of water pressure.
This was an awesome video. So clear! Thanks!
Incredibly helpful. Thanks!
Very detailed presentation
Thank you!
Man do I wish I had stumbled across your video before attempting this install myself. Would have made my life much easier!!! 😂 You at least helped me fix what I had messed up, so kudos!
😂same!
this helped a bunch thank you!!
Thank you; you made this tutorial so easy to grasp, and to replicate; thank you kindly.
Thank you for this post. You answered all my questions
This helped me so much while installing our own Biget
You’re a life saver. Thank you
Thank you! I appreciate this video so much!
Thank you!
Fantastic, thankyou so much. I may have been able to do it alone but it definitely woulda taken me a lot of trial and error
Thank you so much! This is so clear and step by step! Will install it now
Thankyou this was very helpfull
My black cone shaped seal was a bit bigger than yours in the video. I was having leaks so I crammed it in farther down and that solved my leaks.
Awesome demonstration!! Perfect!!! Thank you
A great instruction very easy to understand and follow.
Thank you 🙏🏻
You did a wonderful job. Thank you so much and it was easy to follow instructions. I really needed this tutorial. I have one. Thanks again God bless.
Why does my toilet run continuously now, after installing the bidet? It's a new toilet and I had no issues before installing. I did everything according to instructions. Thank you!
Thanks YOU SO MUCH
Thanks
Tha j you for making this super clear and helpful!
Thank you very much!
best RUclips video on the planet!
Awesome job!!! It worked out easy as you installed I did the same!!! Thanks. The instructions were explained Nothing like you explained. Thanks again!
Thanks for the clear directions
Thank you it was super easy with your video
It's because of this video that I will be purchasing this unit.
Well done
The water shoots out the gap between the bowl and the seat due to the spacers to level the bidet after its installed (those 3 little gray feet). What do I do? I don’t want to towel dry my floor every time I use the bidet.
Thank you!!!
Nice info.👍
Thank You!! Saving this
Perfect.
Very thorough instructions thank you
Great video
Thank you so much!
Merci super explication 💯🔥
Nice instructions but to make it level with my toilet, which it seemed to not fit at all even with the little props, I put 4 washers underneath each bolt between the lid and the toilet when putting the lid back on
Thank you I wish more videos were like yours
Thank u so much
Thank you! I successfully installed mine😊
you are the best
Awesome tutorial, thanks!
This helped so much, thank you!
Good video but. Only use Teflon tape where there is no rubber seal. And never on a plastic fitting, the plastic can crack. Never over-tighten ("your just in case") a compression fitting with a rubber insert as you will bind the rubber and create a leak.
Great instructional video!!!
Glad it was helpful!
Good job 👍🏻 awesome
Thank you for the vedeo
Thanks was easy
Very well explained. Thank you for doing this video. I feel like I can do this now 😆
I’m gonna give it a try without my husbands help. Surprise him! 🤣😂 oh boy! I’ll come back to tell you how I did 😂😂
Oh great i copied you and finished it in 25-30 mins !! Great video with full clarity .. Really thanks appreciable !!Definitely SUBSCRIBE your channel right now !
Great video, I have a bidet and switching it out to this one. I'm leaving the hoses on, this might be a silly question but do I still need to turn water off? The last time I broke the handle to the shut off. Now I'm scared to shut it off.
Yes u will still need turn the water off… for older houses turn slowly… I’ve had issues in older homes before where I would turn the valve off but water would still drip so I just had to quickly make the install before it got too wet.
@@WorldofTech Okay Thank you.
When I installed it at my water inlet valve main line I have water a little coming back up from there do I need to tighten or tape?
So, do you use soap or a tool that will help you clean? Like I really don't know how to use it. You put your hands in there or it cleans you without having to touch yourself? - Does it make the water go all around your cheeks with feces? So many questions
Thank you! I was nervous if I could install this but you made it easy.
Well your last name is plummer...
Thank you for putting together such a detailed video on installing this! You saved me time and potentially a water leak in bathroom! How can I tip you?
No worries thx for the comment 😀👍🙏
@@WorldofTech Well then what is your favorite charity/cause? I'll donate to them.
@@michaelrehberger3219 st.Jude.org thank you. God Bless and Happy New Year🙏🤗
The instructions say not to use Teflon tape since the lines are stainless steel. Is this corrects?
Teflon tape is totally unnecessary. The rubber washers supplied make the seal. Make sure the cone shaped rubber washer faces up. Mine did not leak.
Teflon tape is not needed since all hoses have gaskets.
The washer should be pointy side down not up. T will leak with pointy side up. Also the black washer will not fit if its pointing up.
The valve coming out of my wall doesn’t have the knob, it’s a push-pull compression valve, will I still be able to install?
We moved our bidet and lost the black washer. Does anyone know the size so we can go get a new one?
Brass T connector is leaking, any suggestions?
Same :/
He put on the washer incorrectly. Remove the black washer it should be the pointy side down. Also, if its still leaking this may mean your threading is not threading straight. When you are screwing the T to the connector make sure it goes in straight as your screwing it in.
No need for Teflon tape on compression fittings. The hose spins when tight (by design), the rubber seal keeps water from leaking.
My t-connector isn’t tight how do I tighten it?
Question: I did this exactly and when I restarted the water down the line there is no leakage; however, the toilet will not stop running. The bowl is full, the tank is full, but it still keeps running. Has anyone had this problem before? I have to turn off water to the line to get it to stop once it's full. Not sure what I did wrong
Toilet won't drain all the way, would take like 30 sponges to sop it all up. Tank leaves like half a gal of water and bowl has like 1 cup of water. What do?
i installed mine. the bidet works fine, but the toilet won’t fill back up when I turn the water supply back on....
What is this product?
I had the same problem you did with my seat not being flush. Rather than using those ugly bumpers, I found that replacing with a nicer wooden seat did the trick. It cost a bit more to do this, but the advantage is that I now have a slow closing lid. Two birds with one stone.
My brass t connector doesn't fit. I live in the states so it should. Wonder if I got a bad one.
Me too! Only fits without the rubber washer. I don’t know what to do
@@amymaliff1451 I went to home depot and got a t connector for the main valve instead of connecting under the toilet. It works.
Where would I get a new washer?
How has it been since you installed it. Any leaking from the bidet unit itself?
It still works perfectly no leaking issues whatsoever.
Me and my butt would like to say thanks. 🙋♂️
2:08 the water supply valve on my toilet is too tight, how can I loosen it?
I have lost the rubber washer that connects to the T connector. Does anyone know the size of this washer to get a replacement part?
You can get an assortment pack for a couple dollars at Lowe's / Home Depot. Bring the T connector with you
So the water spray is coming from the tank water?
No the water comes directly from the water line.
I can definitely do this. I am tired of buying so much toilet paper. These are on sale.
Once u get a bidet u don’t wanna go back.
Where i can get those ruber thing that you put on the seat cover
Got it from Amazon. Called toilet bumpers.
What’s it used for 🤔
My question is are u still using this now?
Ni ce