Luxe Bidet Neo 120/110: How to Install Step by Step (Perfect!)
HTML-код
- Опубликовано: 18 окт 2024
- Here a step by step tutorial on how to install / setup a Luxe Bidet Neo 120 (Neo 110 same install). Hope this helps.
Luxe Bidet Neo 120 - Self Cleaning Nozzle - Fresh Water Non-Electric Mechanical Bidet Toilet Attachment: amzn.to/3gQHQw6
Amazon Daily Deals: amzn.to/2QVcoRC
----My Gear for RUclips videos----
Main Camera 99% (smartphone): amzn.to/2utQFGH
Tripod: amzn.to/2xxpKcw
Cell Phone Tripod Adapter: amzn.to/2iM4Kw5
Selfie Stick/Tripod: amzn.to/2iK2Agu
Microphone: amzn.to/2xTAw13
Lights: amzn.to/2xVa5Ic
Electric Desk: amzn.to/2LLyzqU
Dual Device Tripod Setup w/ Hand Grip : amzn.to/2sOXuC2
Cheap Video Editor: bit.ly/2HdAMb7
Business inquires: WorldofTech11@gmail.com
Twitter- / worldoftech11
Disclaimer: The above links are affiliate links meaning if you buy products using those links i will receive a small commission.
Also i am not responsible should anything go wrong so do at your own risk!
Why did I burst out laughing when that water bit you 😂😂 I died. Thanks for the tutorial
You got one for Christmas too?🤣
caught us off-guard i guess. i haven't laughed harder in a while
Just installed mine and the same sh$t happened to me..lol. Gotta watch out for the spray of water!! Thanks for the Tutorial.
Cause it was a genuine reaction 😂
That test spray was essential for me to know it works 😂
Thank you! It's been sitting here for weeks. Waiting for my husband to install it...... I'm going to do it myself now.
Do it Nikki 👍💪🏻
Just be patient to Not cross thread when you turn the nuts.
Do Not put Too much force on the wrench either, kinda turn by hand til snug then about a 1/2 to 3/4 turn more.
(If it leaks you can always tighten it a bit more)
Keep checking for leaks daily for a week, then once a week.
*also periodically, cause sometimes the water company might accidentally bump the water pressure up & that might (might, rare) cause a leak.
Good luck.
You Can do it.
Lol same I’m not waiting any longer
Same here 😂
Get his ass girl
Thank you for this excellent tutorial. Unlike everyone else I needed to know how to UNinstall one of these things. From my experience I want to caution folks to make sure there are no slow leaks, your point about using the plumbers tape is good. My tenant vacated my rental house and left one of these bidet attachments , immediately I noticed that the toilet was not level. Looking closer I saw that water had been dripping and rotted the floor ! What a mess, and expense ! She was there for five years , unfortunately I don’t think she cleaned the bathroom very often so she probably didn’t notice. I would say, even after you have installed the bidet that it’s a good idea to check periodically for leaks.
Thanks for this! I'm a visual learner and have to see someone actually doing it. Pictures are ok but seeing it in action helps a lot. And that was funny when you turned it on 🤣 I figured that would happen!!
It was funny at the end. I tested mine with the seat down but I had to wipe up water from the floor
Test run and it hits the spot… What we’re all looking for in a bidet tutorial.
my mans got attacked at the end!!! LOL
4:27 LOL. That made this video. Was not expecting a fact-finding mission to turn into a ha-ha. Thank you! You should put this under comedy for that one! Made my day
Lol
Thank you for this video. I am a 60+ woman and just installed the Neo 120 by myself in 15 minutes. Yay!
Haha good job!!
Great toot!
……The paper instructions weren’t terrible, but a quick vid to play as I installed was way faster. Super easy to install & the wrenches that came with didn’t even fit. Total process took 10min. This lil’ guide + $30 is quite honestly something everyone should invest in!
Thanks for the accuracy & simplicity! Happy poopin’!!
Thanks for sharing. The Teflon tape is for metal to metal threads, also the metal and plastic three way fittings are for 2 different size provisions of your toilet.
Thanks for the tutorial. Although I would suggest dealing with the pipes first before attaching the bidet to the toilet due to the space between the wall and the pipes. An issue I ran into was that my pipe was leaking even though it was closed all the way, and by the time I was able to attach all the pipes together the floor was nearly flooded.
I learned the hard way to install the pipes first but I got mine installed with no issues
Thank you for this! Perfect tutorial. Straight to the point and clear.
Such a well made to the point instructional video. Good job.
I had to rewatch the end. Very funny. Thanks for the video. I think I'm going to get one.
I brought mine in 2020 and have yet to install it because of fear, however, you made it look so easy that I intend on installing mine tomorrow. Thank you.
well how is it? :)
Did you install ?
I tried to install it and there’s a stuck screw and I cannot get it off. I was able to drain the tank, disconnect the water line, and removed one screw and now I’m stuck. I tried to use some tool my daughter let me borrow but it didn’t work. I put everything back together and gave up and now I have a loose toilet seat.😜
Started my install trying be to confident with the direction and my water was leaking a bit, I believe it was due to water in my tank leftover (I emptied it as much as I could) but wasn't sure. Thank you for confirming this in the video! I now feel confident to finish the install!
Me too.
😊 2:33
perfect tutorial! didn't even need the sound lol
great job filming this
Thank you!
I followed you step by step and even screamed when I turned on the water 😂 it was still unexpected
thanks for the video. package came with two t adapters, one metal one plastic, instructions only mentioned metal one, didn't know which one to use so came to your video and found out i could use either one. thanks!
The ending made my morning, thank you for the laugh hahaha
I just want to see the way you’re doing your video is perfect. You cut to the Chase you should turn this into a full-time job doing videos the way you do you don’t beat around the bush. You get straight to the fact keep it up. You’re doing a great job.
Thank you World of Tech - video still works in 2020! This little lady go the bidet installed in 30 minutes thanks to you!
You’re awesome
The water to the face was hilarious 😅
Thanks for this tutorial. Super easy instructions.
Thanks for this video! I just finished installing my bidet with your help :D
Fantastic!
Low setting seems strong. What's the high setting for? Enemas?
Lol
Lmaooo!!!!
To pop hemorrhoids 😆
Thank you for making this! It made my installation so easy.
Thank you for doing this! I was wondering about this product. The one I had before needed an outlet and in my development they don’t put them close to the toilet unfortunately
Hey man great video to the point no lag nothing that's the way videos should be done. And your voice sounds like a young Clint Eastwood. 👍🏻
Thanks a lot. It really helped. I had to shut of the main because the tap wasn't shutting off. But I did. Yaay..
This was actually a very informative review. Nice explaining 💯
Thanks! You made installation much easier!
Thank you so much! This was just perfect for me; very easy to follow!
I have a Luxe bidet Neo 320, but I kept putting off installing it. I almost did it last Saturday, but I decided to wait until the maintenance guy was here so that if anything went wrong I could call him up. Unfortunately I would not be allowed to drill a hole to get to the warm water too, but it's nice to know that the cold water can still work and be tolerable.
Short and sweet. Thanks! I also did the stupid thing and didn't turn it on slowly. Got myself wet lol. You'd think that after seeing you do it I'd keep this in mind. Nope lol. Thanks again!
Lol
Thank you! Got it installed in less than 15 minutes!😁
Got it all hooked up with no issues! Thanks so much for the video!
This video helped me out alot ihstalled mines without a problem,thank you
Great tutorial! (I'm commenting to remind myself to watch this video later.)
Thanks for taking the time to help a brother out!👍
Ha! Loved the happy ending. 😂
I have to get used to the cold water but it does an excellent job.
Easy to install, ruclips.net/user/postUgkxjA-hDN2m8_mi0Dg0JD8U6QiArozIAc4I and comfortable. No idea what other people were talking about when they said it was difficult to install or uncomfortable.
Is this a toilet accessory and how much is it?
Dang, that last five seconds was hilarious! Nonetheless, I appreciate tutorial.
thank you 🙏 just installed mine
best investment ever
Thanks for the install video, going to install one in the apartment soon
Thank you & you showed is in less than 5mins 🙌🏼🙌🏼
Ok, I'm going in! I can't wait.
Thanks! Just put mine on and you helped.
Bought a place to live and one of the bathrooms had a bidet. I tried it and I never went back. The amount of toilet paper you will never use again is insane.
Great Tutorial! Could not have done it without this video! Thanks a Million!
The end of this video is so good lmao thank you for this “….anyway” lmao
This was amazing 👏🏾 you made this process easier, Thank you 😊 💓.
Thanks for the video and saving my sanity. I came here because I had a leak and only when watching your video did I see that the rubber washer you have in you T piece is missing from mine!
Toilet seat is now 1" in the air. And when one sits on it, toilet seat goes down and puts pressure on the cover and sprayer no longer works, doesn't extend.
Did you have to add bumpers to this? And if yes, do bumpers stay put or fall off?
Great step by step process. I just wish the bottom lid closed evenly.
Thank you just installed my net 110 using your tutorial. P.S . That first squirt splashed me so bad 🤣
😂😂
Did your toilet sit close properly did you have to add bumpers to underneath of the toilet sit?
Put it on and the seat and top don’t lay flat on the porcelain bowl,the thickness of the cleaner makes it so it doesn’t lay flat any suggestions
Hey! I just found this video along with other videos I missed Didn’t receive it on my notification. This is an interesting review on this gadget for the toilet. So what’s your thought on it since you had it installed.
Let’s put it this is way... I wish I had this years ago. U won’t understand until u actually have one.
That ending "O Shit" made me laugh too hard.
Awesome video. You made it look easy and do able . Thank you
Followed this process exactly. But my problem is our toilet seat is now lifted up and does not sit flush with the toilet. I can’t see where I could make any adjustments for this problem to prevent eventually cracking/breaking the toilet seat. Any help?
Buy toliet bumpers.. they sell them on Amazon.
You made it so easy and quick.
Best video love the end test there 😂
On the whole, this was helpful 🤪
Perfect instructions, thanks!
Nice and easy. Very good video. What is the purpose of the teflon tape?
it creates a tighter seal to prevent water leakage. it helps alot
3:40 did you turn off the valve after the water tank is filled?
Thanks for the video, everything else was very clear!
Just installed it. Got sprayed in the face like dum dum lol. Thank you
This video was very helpful! Thanks
The ending: "OH! Sh... Perfect." LOL Well, which is it? A surprised, "Oh shit!" or, "Perfect!" It sure looked like it was spraying off to the side rather than being centered. This is a very helpful vid. I'm just wondering if you needed to make any adjustments?
What about your toilet seat. Is it really high up off the toilet bowl?
Thanks for the help. Just mounted one on. Its amazing how cold water hurts the culo. Lol
Been wanting to install but like most here we are scared of minor plumbing jobs... Not anymore...clean booty here i come 😅 (water attack at the end is priceless 😂)
Thank you for the video. It’s easy and helpful.
Thanks 😊
Thank you so much for the tutorial! Excellent 👍
My toilet has a static pipe, not the flexible kind attached to your toilet. Should I just replace the existing pipe? Any reason for that type of plumbing being done on a toilet?
I just installed this AFTER back surgery ouch! I did not realize I would have problems in that "area" I wish they would have warned me!
I agree, why don't they warn us about this! I'm about to have back surgery, and happened to see where someone mentioned this on a facebook group page. I'm trying to install one right now. I hope yours is helping, and that you're healing up well!
@@skyaker8241 I had lumbar decompression surgery 1 month ago I installed the bidet 3 days after surgery, I'm healing nicely and the surgery has become a much needed vacation LOL I hope you're healing nicely as well! BTW the wife and I like the bidet and installed a second one in the guest bathroom.
Mine doesn't have water pressure like that at all. Also, the nozzle clean doesn't work. Any idea why?
Thank you for this video. I was able to install the bidet because of this
Great! Thanks for the video
Thanks for the video.
I just used one of these at house I'm doing work at. I'm sold, take my money
Def worth it hands down. U won’t wanna go back to smearing and wasting toliet paper. lol
Tudorial was great. Quaility of the plumbers tape included in the box was poor at best. I was surprised at the quality of the toilet seat you used. I have a very good toilet seat and it was a challenge to remove it. I had to stand on my head to remove my seat. All in all it was a good tutorial on installation, however I had to break out the real tools to get the job done.
Thank you for the tutorial!
Huge help!!! Thanks!
Thanks for the upload. This helped a lot
This whole video was great
Thank you! Setting it up today.
How long were the bolts for the seat? I couldn't get my toilet bolts to reach-- they were too short with the bidet thingy raising things up.
It was really helpful thanks a lot
Install was easy but there’s a huge gap at the front of the toilet seat on mine. I’m confused because my toilet looks exactly like the toilet in the video. There’s a solid 2-2.5 inch gap at the front after install . How do I correct this?
You might want to pin this comment: I’ve noticed after installing the bidet the tank continues to fill. This is because when we tighten the tee it moved the fill Value. To fix this slightly turn the full value until you here it stops! Your welcome:)
"It hits the spot!"
Works Great !
What brand toilet seat do you have with this bidet…
what did you do with the bolts that were attached to the screws. were those not needed anymore?