Thanks sir. Also I want to add that new faucets without that steel decoration in middle.. the washer is getting stuck in jet after separating from spray. So ur video made me understand the problem. I thought washer is supposed to be at jet part but now corected that it should be at spray part with holes when i changed that all problem solved...
Can u we use 1)acid instead of thinnar. 2) u are telling, three places we have near tap where we are screwing ,2. Washer inside what u explained 3 That pressing knop. Well told how clear dust of washer s what about leakage near pressing knob. Pl. Explain.sir
Hi, Close the valve that supplies water to the faucet, clean it dry, open the valve half, if the water drips from the pipe joint then gasket at pipe joint need to be checked and replaced or softened as shown in the video if necessary and if the water drips from the jet on/off lever or the outlet of the jet then need to check jet. Thank you, have a GOODTIME....
Your pronounciation of Washer as Waiser is very funny. This is really tricky and after every use, you need to close the supply valve on wall and drain the water remaining in the hose by shaking the faucet vigorously while keeping the operating lever pressed. Stainless steel body faucets are less prone to leakage compared to their plastic counterparts. Hard water is the real culprit behind malfunction/leakage of most health faucets. What NC stands for in NC Thinner?🤔
Thank You..I fixed my faucet by following you instructions 💕
Great, many thank you. Hope it will through the night without any leak
Dear sir, i did in the way u told and it worked fine.. The spray is not leaking now.. Thanks for the very nice diy..
Thank you sir...I fixed the leakage after seeing your video..
Soo many thanks sir... It helped me alooot..... ❤❤thank you so much sir....
You are most welcome, thank you for watching the video, have a GOODTIME....
Thank you it's so useful to fix
Keep it up
Thank you it helped me to fix my problem
Thanks sir. Also I want to add that new faucets without that steel decoration in middle.. the washer is getting stuck in jet after separating from spray. So ur video made me understand the problem. I thought washer is supposed to be at jet part but now corected that it should be at spray part with holes when i changed that all problem solved...
You are most welcome sir,
thank you for watching the video, have a GOODTIME...
Thank you sir just saw your video and did the repair.
What thinner?? Mine is leaking from the push lever handle. How to repair
Great sir
THANKYOU VERY MUCH JI
thank you so much
Very good. Can you show the leakage and repeated separation of the hand held shower from the
good videos
That was some great info thank you for taking the time to share your knowledge. Can you tell what to do when leakage is due to fault of lever?
Oh very nice
Thank you, Have a GOODTIME.
Thanks
Thank you
You are most welcome,
Thank you, have a GOODTIME...
Thank you so much
U have saved my ₹ 500, I was supposed to change my faucet for leakage.
Dear Sir,
Happy to read that video was useful.
Thank you, Have a GOODTIME.
What is the price of that faucet? And which brand?
What is the use of the thinners? how it can repair the rubber washers?just asking
I think it cleand it deeply n thats y it get fix back nicely
Just wondering how thinners can fix leaking washers????🤔🤔🤔🤔
Can u we use
1)acid instead of thinnar.
2) u are telling, three places we have near tap where we are screwing ,2. Washer inside what u explained 3 That pressing knop.
Well told how clear dust of washer s what about leakage near pressing knob. Pl. Explain.sir
Hello Sir, mine is leaking from the lever. Can you please guide me?
Change the faucet
Same here, bought it 1 week ago from second itself leak started from lever. Older model of water tech faucet never had such issues.
Can we put 4WD instead of Thinner ?
I have not tried 4WD but paint thinner (NC Thinner) worked.
Thank you.
Have a GOODTIME.
What if the tube is leaking? Is there any tape for it or need to replace the tube?
Same problem 😕. Pls reply. Thanks in advance
I don't have what I have to use, please guide me for these
🎉❤
Thank you, have a GOODTIME...
What thinner does to rubber, that's my doubt now
What is the name of the soaking solution you used for the washers. What can it be called in The USA?
Hi, sorry for late reply, the solution is "paint thinner", i am sorry i do not know what it's called in USA.
Thank you, have a GOODTIME.
@@GOODTIMEStech Thank u for answering. U do a great job.
Its called Terpentaine
What thinner?
Thinner is like sprit which can make paint thin, used in polishing of woods, easily available in market... Hardware shops.
Hi how do we know if leak is from pipe or jet?
Hi,
Close the valve that supplies water to the faucet, clean it dry, open the valve half, if the water drips from the pipe joint then gasket at pipe joint need to be checked and replaced or softened as shown in the video if necessary and if the water drips from the jet on/off lever or the outlet of the jet then need to check jet.
Thank you, have a GOODTIME....
What liquid is neaded to clean washer name it
I have used NC Thinner, it is available in paint shops.
Thank you, have a GOODTIME.
बोतल में क्या है
Everything u watched.
We can't find properly.
रेट बताओ
Thinner h, Paint Shop m milta h ₹20 m 200ml
Your pronounciation of Washer as Waiser is very funny. This is really tricky and after every use, you need to close the supply valve on wall and drain the water remaining in the hose by shaking the faucet vigorously while keeping the operating lever pressed. Stainless steel body faucets are less prone to leakage compared to their plastic counterparts. Hard water is the real culprit behind malfunction/leakage of most health faucets.
What NC stands for in NC Thinner?🤔
You were rude. He was not teaching you English pronunciation.
Nitro Cellulose Thinner
,🤣🤣🤣🤣😁😁😀😀😀🤣🤣😂😂 The person demonstrating has no clue on how to stop the leakage from the lever.
Thank you sir, have a GOODTIME.
Hindi me bol