Just came from the gun store and it followed me home. He had a great selection of CZ’s, but said the PCR that I purchased was only the second one he’d received this year. Couldn’t be happier. Great review, appreciate the effort.
I chose this for my everyday carry gun (Vedder Holster Kydex...rocks). Built like a tank. Spot on accurate because of weight and low bore axis. Balaced and accurate...wow. I replaced the control rod (OEM is polymer) with a steel one from Cajun Gunworks. Also replaced the firing pin with an extended pin from CZ Custom, the pin block spring which cleans up the trigger even further and the firing pin retaining pin with a rolled pin also from CZ Custom (DON’T do the solid pin option...voids your firing pin warranty). There is talk of problems with fractures in the firing pin retaining pin, but so far so good and they cost $2 to replace. Keep a couple handy...don’t dry fire without snap caps.. Per the video, it is one tight gun. Prefer a lobster claw to rack as overhand can be hit or miss. Requires a modicum of violence...lol. My wife can barely rack it at all, but it cycles fast and furious under fire. And did I mention it was accurate (last trip to the range 30 rounds centert (ish...my wife fit her fist through the hole) out of 30 rounds at 7 yards w/ tactical reload). Double tap center mass to head drills...30 rounds at 5 yards...3 shot bursts from low ready w tactical reloads with PAR times set at 3 seconds...no misses, no malfunctions. It’s heavy for a carry, especially if you like those guns made out of the stuff they make tic tac boxes out of...but man does it help with recoil control. That low bore axis...brilliant...damn. Get you some. You’ll totally freak out the spray and pray Glock kids with their Nathan’s hot dog length extended magazines.
Easiest way to pull back the slide on a CZ 75 Series pistol. Instead of pulling straight back on the serrations put downward pressure on the serrations and pull back. If you use overhand rack that same downward pressure makes it easier.
That trigger for hammer back single action is 5 1/2 pound pull and very smooth! It is a great carry handgun I find it’s perfect in my Nate N8 IWB holster! 👌🤠👌
I have a few CZ handguns and this is my favorite. I have the Tiffany blue aluminum handgrips on mine and love it. My favorite EDC by far! I love CZ guns. The slide rides into the frame for a lower bore center of gravity.
I have the LCP Max which is a great pocket pistol but not great at the range because of its trigger pinch. I have a Kel Tec P11 which is a very good gun but again not much fun at the range. I just bought the PCR and in addition to being EDC in the winter, I wanted a great range shooting pistol. I will take it to the range this week. So far I love its feel and fit in my hand. Smooth trigger pull and just really good looking.
I love this pistol. I would suggest making a change in how you manipulate the slide. Turn your left hand over and grab the slide between your palm and four fingers. Not only do you have much more strength doing this, but the motion is much more fluid as well
The first pistol of what I've taken to calling "my modern era" is a CZ P10F. It was a great re-introduction to pistol shooting, as I didn't feel ready to tackle the "DA mode vs SA mode" thought process at the time. My P10F was followed in short order by a P10S and a SigSauer P365XL, following some recommendations from a trusted acquaintance on carry handguns, then the first N+1 handgun, then the second N+1 handgun (both M&P products), then a P10C, then a P07 (because I was ready to try the DA/SA "thing"), then a great deal on a P09 with a RDS. But there was still an itch. Trying to figure out the reason for that itch took time, but part of it was that, while I found I really liked the DA/SA trigger for carrying with "one in the pipe," I felt that something wasn't quite right for me with the P07 as an EDC piece. Oddly enough, I was also prompted to look at the 75-series by a holster that appeared in my inventory, as the P-07 didn't want to go into the holster, and I was wondering about the different trigger guard of the 75 series. I looked at the P-01, the P-01 Omega, and a couple other pistols from other manufacturers, but found I liked the combination of the sights and the decocker of the PCR enough better than what I was seeing on the P-01 and P-01 Omega to not worry about the lack of rail on the dust cover. I have found my EDC of choice! Because most of my pistols are CZ products, and (I guess) because I have relatively strong hands, I have no trouble racking the slides on any of the CZ pistols I've encountered. I also recognize that my experience doesn't "scale." I'm not one to do a lot of customization of handguns, for a variety of reasons. My P10C has a non-stock mag release, just because the Apex Tactical mag release button works better *for me* than the "old-style" ambidextrous one. My P10-variants have the large back straps installed because they fit my hands better that way, but it's the back straps that came with the pistols. The bedside P-09 has a RDS and a light because, well, it's a bedside piece. But, should I "lose" my carry piece over needing to use that piece to defend myself, I can buy another that will work as well without having to spend even more money with CGW or another provider of aftermarket parts.
Great firearm. Mine sports grips from Cajun gun works, and a new front sight. Found a leather holster on eBay. The dang thing shoots straight and has little muzzle flip and reduced recoil due to the lowed bore axis. Extra mags are spendy, but worth it.
I got mine about a month ago. Love it! I was surprised to see my frame not completely done too... but great gun. It was my first cz too. Now I’m a cz fan lol. Vedder holsters make great kydex for the pcr. I highly recommend them
@Dave there's a spot inside the lower half of the pistol that doesn't have that black coating on it. Not really necessary to have it there. Just thought it was weird that they do that on all their pcr series. Might be a way to tell them apart at the factory. Idk
edc my pcr in an iwb holster from Tommy Theis. Hybrid holster with adjustable height and cant --- great workmanship. I also changed out my grips for thinner G10's even though I loved the feel of the stock rubber grips. Just that my cover garment would hang up on those rubber grips in light clothing (summer) weather. Tru-glo sights on too and now I don't think I can find a better carry gun. Spoiled by CZ.
Just bought one yesterday got a new carry gun. Can’t wait to shoot it. Love the grips , the sights are pretty lame. The slide pin is super tight but that will loosen up with use. Can’t believe I waited so long to get a CZ. My wife has carried a CZ 82 for years but just switched to a Canik TP9 sub compact. Nice little gun about the same size as the PCR.
I got one and best pistol I got this one is going to the grave with me. When you want to remove the slide just half decock to line up your lines. I put a set of Tru-Glo sights and new grips that's all, I have over 1500 rounds with one hiccup. I had a leather holster made for mine. Good Job on the review
The PCR is fantastic. Excellent choice! Remember to keep the dry firing to a minimum (or use a snap cap when you do), because the firing pin's retaining pin broke on mine after a few thousand dry fires (bummer &= my fault). Same goes for any hammer fired gun actually. Up until that though, zero malfunctions and often hit the bullseye (I'm average at best). Cajun Gun Works's defensive carry package supposedly makes this gun even better. Thanks for the video.
put the #83 rubber o rings over the firing pin, dry fire all you want with no damage to roll pin. just squeeze them together between the space and the firing pin. I got mine at home depot.
I bought this exact gun 1 week ago its also my first cz . Every review i see the gun came with 14 rd mags mine came with 15rd mags. I love the grips that came with it but if i change them im in between wood grips and g10.
Not sure why everyone thinks CZ’s are difficult to take down, pull the slide back so slide and frame markers match up and use the mag to push the take down pin through. Easy as pie....🙄
My PCR was purchased from CGW 3 years ago with the PRO PACKAGE installed. I INSTALLED THE CGW 10X bushing and night sights from CZ CUSTOM that were designed for the PCR (no gap). Since then I have purchased and installed CGW PRO PACKAGE and 10X bushings in my two PO1s that I purchased. I recommend that anyone buying a CZ DECOCKER to get the Armorers manual from CZ its a great help....
The single action is not a 6lb pull. Mine is 3lbs on single action. The double for mine is 11 lbs but you never use the double. After racking you use the decocker which drops the hammer to half-cock. The half-cock is what has the 6-7 lb pull. There is really never a scenario where you would fire this pistol from the full double. You would have to rack a round into the chamber then, being unsafe, would need to ignore the decocker and thumb down the hammer while pulling the trigger. The pistol is meant to be carried in half-cock which give you a 6 half double 1st pull then a wonderful 3lb single follow up. After a few years my PCR has really broken in nice. Very smooth action. Single action trigger is 2.7 lbs and the slide is much easier to manipulate. CZ really benefit from breaking in. Of all my pistols my CZ’s change the most with break-in.
Unfortunately the pin will become damaged a little over time with regular use anyways. Luckily it's a relatively easy part to replace, and you can get a pack of 100 roll pins on Amazon for dirt cheap if I remember correctly (or you can spend the $15 with shipping on the Cajun one)
PrepperJunkie do you have a problem with the stock grips grabbing the magazine? My mags only drop a little; they will not fall out because of the rubber grips grabbing them from the inside.
PrepperJunkie Ive taken the grips off and don’t see a fix without messing up the grips. I may drive by Cajun Gun Works today and see what they have to say about repair or replacement. I need new sights anyways...
Just wanted to point out you mentioned the P-01 is a steel frame. The P-01 is actually aluminum frame as well and very similar in weight. The difference being the P01 has a full length dust cover and rail. You may be thinking of the '75 compact' which is a full steel pistol and noticeably heavier, it looking pretty much the same as the PCR but with a safety and some other minor differences.
Yeah it's not finished because of the tight tolerances manufactured between the slide and the frame. This is purposely done to get the functionality of the 2 mating pieces. Lol. 😀😀😀
@@TheArmedScotsman I was thinking Scotland! Sounds like a mix of Scottish, Canadian and American haha Thanks for the review. Would you recommend this as a first handgun? I'm looking for a good range gun but also something I may want to carry occasionally.
@@enceladus2263 I love this gun, it's def one of my favorites! Of course being Scottish I'm vertically challenged at at 5'7 so I personally carry the P365. However I def recommend this pistol!
Great review. Do yourself a favor and spend $25 on the MCARBO spring kit. It will completely transform the pistol for the better. Do it yourself and save a ton of money.
I did the same thing for my CZ 75B, the best $25 I've ever spent. I would also recommend getting the stainless steel guide rod & extra power recoil spring. I will be doing this with my PCR as well and want to get better sights too.
Sorry to hear that. My PCR is super accurate. If you want to sell it I'm sure you won't have any issues seems to be harder pistol to come by. Best of luck.
Lol its a trend seeing stupid republicans get their panties in a bunch over Cali. Don't sweat them . their indoctrinated & brainwashed by Fox News propaganda.
Just came from the gun store and it followed me home. He had a great selection of CZ’s, but said the PCR that I purchased was only the second one he’d received this year. Couldn’t be happier. Great review, appreciate the effort.
I chose this for my everyday carry gun (Vedder Holster Kydex...rocks). Built like a tank. Spot on accurate because of weight and low bore axis. Balaced and accurate...wow. I replaced the control rod (OEM is polymer) with a steel one from Cajun Gunworks. Also replaced the firing pin with an extended pin from CZ Custom, the pin block spring which cleans up the trigger even further and the firing pin retaining pin with a rolled pin also from CZ Custom (DON’T do the solid pin option...voids your firing pin warranty). There is talk of problems with fractures in the firing pin retaining pin, but so far so good and they cost $2 to replace. Keep a couple handy...don’t dry fire without snap caps.. Per the video, it is one tight gun. Prefer a lobster claw to rack as overhand can be hit or miss. Requires a modicum of violence...lol. My wife can barely rack it at all, but it cycles fast and furious under fire. And did I mention it was accurate (last trip to the range 30 rounds centert (ish...my wife fit her fist through the hole) out of 30 rounds at 7 yards w/ tactical reload). Double tap center mass to head drills...30 rounds at 5 yards...3 shot bursts from low ready w tactical reloads with PAR times set at 3 seconds...no misses, no malfunctions. It’s heavy for a carry, especially if you like those guns made out of the stuff they make tic tac boxes out of...but man does it help with recoil control. That low bore axis...brilliant...damn. Get you some. You’ll totally freak out the spray and pray Glock kids with their Nathan’s hot dog length extended magazines.
Easiest way to pull back the slide on a CZ 75 Series pistol. Instead of pulling straight back on the serrations put downward pressure on the serrations and pull back. If you use overhand rack that same downward pressure makes it easier.
I just got a IWB holster from Hawg Holster made specifically for this gun. Great product.
Just picked one of these up, LOVE IT!! Great review! And isn't funny how Cali thinks criminals will obey their stupid mag laws smh
That trigger for hammer back single action is 5 1/2 pound pull and very smooth! It is a great carry handgun I find it’s perfect in my Nate N8 IWB holster! 👌🤠👌
I have a few CZ handguns and this is my favorite. I have the Tiffany blue aluminum handgrips on mine and love it. My favorite EDC by far! I love CZ guns. The slide rides into the frame for a lower bore center of gravity.
Really love this cz pcr- saw one in a shop a few days ago
I have the LCP Max which is a great pocket pistol but not great at the range because of its trigger pinch. I have a Kel Tec P11 which is a very good gun but again not much fun at the range. I just bought the PCR and in addition to being EDC in the winter, I wanted a great range shooting pistol. I will take it to the range this week. So far I love its feel and fit in my hand. Smooth trigger pull and just really good looking.
I have a High Noon leather owb holster,and Hanks iwb holster for my P-01 , and the PCR fits really nice in both.
Great video.
I love this pistol. I would suggest making a change in how you manipulate the slide. Turn your left hand over and grab the slide between your palm and four fingers. Not only do you have much more strength doing this, but the motion is much more fluid as well
The first pistol of what I've taken to calling "my modern era" is a CZ P10F. It was a great re-introduction to pistol shooting, as I didn't feel ready to tackle the "DA mode vs SA mode" thought process at the time. My P10F was followed in short order by a P10S and a SigSauer P365XL, following some recommendations from a trusted acquaintance on carry handguns, then the first N+1 handgun, then the second N+1 handgun (both M&P products), then a P10C, then a P07 (because I was ready to try the DA/SA "thing"), then a great deal on a P09 with a RDS.
But there was still an itch. Trying to figure out the reason for that itch took time, but part of it was that, while I found I really liked the DA/SA trigger for carrying with "one in the pipe," I felt that something wasn't quite right for me with the P07 as an EDC piece.
Oddly enough, I was also prompted to look at the 75-series by a holster that appeared in my inventory, as the P-07 didn't want to go into the holster, and I was wondering about the different trigger guard of the 75 series.
I looked at the P-01, the P-01 Omega, and a couple other pistols from other manufacturers, but found I liked the combination of the sights and the decocker of the PCR enough better than what I was seeing on the P-01 and P-01 Omega to not worry about the lack of rail on the dust cover. I have found my EDC of choice!
Because most of my pistols are CZ products, and (I guess) because I have relatively strong hands, I have no trouble racking the slides on any of the CZ pistols I've encountered. I also recognize that my experience doesn't "scale."
I'm not one to do a lot of customization of handguns, for a variety of reasons. My P10C has a non-stock mag release, just because the Apex Tactical mag release button works better *for me* than the "old-style" ambidextrous one. My P10-variants have the large back straps installed because they fit my hands better that way, but it's the back straps that came with the pistols. The bedside P-09 has a RDS and a light because, well, it's a bedside piece.
But, should I "lose" my carry piece over needing to use that piece to defend myself, I can buy another that will work as well without having to spend even more money with CGW or another provider of aftermarket parts.
Great firearm. Mine sports grips from Cajun gun works, and a new front sight. Found a leather holster on eBay. The dang thing shoots straight and has little muzzle flip and reduced recoil due to the lowed bore axis. Extra mags are spendy, but worth it.
I got mine about a month ago. Love it! I was surprised to see my frame not completely done too... but great gun. It was my first cz too. Now I’m a cz fan lol. Vedder holsters make great kydex for the pcr. I highly recommend them
Thanks man, I've been looking for a holster!
I love mine its fully cajunized and i got 2 26rd mags lol crazy fun
Got the same set up. PCR in a Vedder holster. When I'm not caring my p365, my PCR is on my hip.
@Dave there's a spot inside the lower half of the pistol that doesn't have that black coating on it. Not really necessary to have it there. Just thought it was weird that they do that on all their pcr series. Might be a way to tell them apart at the factory. Idk
edc my pcr in an iwb holster from Tommy Theis. Hybrid holster with adjustable height and cant --- great workmanship. I also changed out my grips for thinner G10's even though I loved the feel of the stock rubber grips. Just that my cover garment would hang up on those rubber grips in light clothing (summer) weather. Tru-glo sights on too and now I don't think I can find a better carry gun. Spoiled by CZ.
Thanks for the great video.... well done!
Great review. Thanks!
Just bought one yesterday got a new carry gun. Can’t wait to shoot it. Love the grips , the sights are pretty lame. The slide pin is super tight but that will loosen up with use. Can’t believe I waited so long to get a CZ. My wife has carried a CZ 82 for years but just switched to a Canik TP9 sub compact. Nice little gun about the same size as the PCR.
Yeah the PCR is an amazing pistol!
I got one and best pistol I got this one is going to the grave with me. When you want to remove the slide just half decock to line up your lines. I put a set of Tru-Glo sights and new grips that's all, I have over 1500 rounds with one hiccup. I had a leather holster made for mine. Good Job on the review
Darren Landis did you go with the TFX pros? If so, how are they still working out for ya?
@@palumbo78 yes and they are very bright even in bright daylight.
The PCR is fantastic. Excellent choice! Remember to keep the dry firing to a minimum (or use a snap cap when you do), because the firing pin's retaining pin broke on mine after a few thousand dry fires (bummer &= my fault). Same goes for any hammer fired gun actually. Up until that though, zero malfunctions and often hit the bullseye (I'm average at best). Cajun Gun Works's defensive carry package supposedly makes this gun even better. Thanks for the video.
Ty Caramba I ordered the Cajun Firing pin Retaining pin, and a few extra, also the Reduced power Trigger return spring for better reliability
put the #83 rubber o rings over the firing pin, dry fire all you want with no damage to roll pin. just squeeze them together between the space and the firing pin. I got mine at home depot.
It's an internal slide. The slide rails are on the inside instead of the outside.
Purchased one yesterday! I already own P01 and simply love the CZs! My budget will expand to many more of these simply outstanding firearms they are!!
Aye, very nice video laddie!
I bought this exact gun 1 week ago its also my first cz . Every review i see the gun came with 14 rd mags mine came with 15rd mags. I love the grips that came with it but if i change them im in between wood grips and g10.
I am Indian but this gun to buy
Not sure why everyone thinks CZ’s are difficult to take down, pull the slide back so slide and frame markers match up and use the mag to push the take down pin through. Easy as pie....🙄
My PCR was purchased from CGW 3 years ago with the PRO PACKAGE installed. I INSTALLED THE CGW 10X bushing and night sights from CZ CUSTOM that were designed for the PCR (no gap). Since then I have purchased and installed CGW PRO PACKAGE and 10X bushings in my two PO1s that I purchased. I recommend that anyone buying a CZ DECOCKER to get the Armorers manual from CZ its a great help....
Whats the perks of the 10x bushing. I got a pcr and im doing a bunch of upgrades to it ? Is it a noticeable difference
They do not finish any of the insides there, but only there” same on my PCR
If you put the hammer at half cock the take down marks will meet. Alot easier taking it appart.
The single action is not a 6lb pull. Mine is 3lbs on single action. The double for mine is 11 lbs but you never use the double. After racking you use the decocker which drops the hammer to half-cock. The half-cock is what has the 6-7 lb pull. There is really never a scenario where you would fire this pistol from the full double. You would have to rack a round into the chamber then, being unsafe, would need to ignore the decocker and thumb down the hammer while pulling the trigger. The pistol is meant to be carried in half-cock which give you a 6 half double 1st pull then a wonderful 3lb single follow up. After a few years my PCR has really broken in nice. Very smooth action. Single action trigger is 2.7 lbs and the slide is much easier to manipulate. CZ really benefit from breaking in. Of all my pistols my CZ’s change the most with break-in.
are you from scotland
😂I got the PCR SP-01 and 75B I think I’m sick 🤣 I need help with another one 🤷🏽♂️
Always makes me feel good inside when people come to America and enjoy our god given right to bear arms. We need more immigrants like you brother
You're an immigrant as well.
@@zarinkai2927 what the fuck are you on about
I agree but god isn't real
@@cia7832 Your opinion.
This comment thread is 2021 in a nutshell
My cz po1 has not coating in the frame either alot of the alloy frame come from cz
Ill buy the 10 round mags from u. I live in the republic of Massachusetts. Let me me know. Great Vidio. I love mine.
A whole lot of dry firing going on. Not recommended without snap caps because you can damage the firing pin retaining pin.
Unfortunately the pin will become damaged a little over time with regular use anyways. Luckily it's a relatively easy part to replace, and you can get a pack of 100 roll pins on Amazon for dirt cheap if I remember correctly (or you can spend the $15 with shipping on the Cajun one)
Do the rubber grips interfere with EDC...will a shirt get hung up on them....thanx, and great info!!
People have mentioned issues with it "sticking" on clothing. The grips are easy and cheap to replace though.
PrepperJunkie do you have a problem with the stock grips grabbing the magazine? My mags only drop a little; they will not fall out because of the rubber grips grabbing them from the inside.
@@JustPlainCommonSense I haven't had that issue.
PrepperJunkie Ive taken the grips off and don’t see a fix without messing up the grips. I may drive by Cajun Gun Works today and see what they have to say about repair or replacement. I need new sights anyways...
Cz world class
👍
What's your thoughts about this PCR vs your Rami?
Just wanted to point out you mentioned the P-01 is a steel frame. The P-01 is actually aluminum frame as well and very similar in weight. The difference being the P01 has a full length dust cover and rail. You may be thinking of the '75 compact' which is a full steel pistol and noticeably heavier, it looking pretty much the same as the PCR but with a safety and some other minor differences.
Correct the SP 01 is a steel frame
@@ckim6400 SP-01 is full size. This review is speaking of the compact version. The '75 Compact' has a steel frame. The P-01 has aluminum frame.
@@blairtaylor9552 I know and the 2075 Rami has an aluminum frame.
I want to buy this gun in india
does it feel any different than a cz 75 compact steel frame
I haven't had my hands on one unfortunately.
Thank u for saying 14rd STANDARD mag too many gun videos keep saying high cap mags that only helps to legitimize the gun control bans like commifornia
Yeah it's not finished because of the tight tolerances manufactured between the slide and the frame. This is purposely done to get the functionality of the 2 mating pieces. Lol. 😀😀😀
I've heard The CZ DOESN'T RUN hollow point ammo good...being a EUROPEAN design and hollow point ammo is outlawed...can someone comment please. Thx
I had a few problems in mine but polished the feed ramp and it's been trouble free ever since with many different brands of hollow point ammo.
“Cause I’m not in a commie state” 😂 I’m from California and find that amusing
Where's your accent from?
Originally from Scotland but been in the U.S a long time now. My accent is a mess lol
@@TheArmedScotsman I was thinking Scotland! Sounds like a mix of Scottish, Canadian and American haha Thanks for the review. Would you recommend this as a first handgun? I'm looking for a good range gun but also something I may want to carry occasionally.
@@enceladus2263 I love this gun, it's def one of my favorites! Of course being Scottish I'm vertically challenged at at 5'7 so I personally carry the P365. However I def recommend this pistol!
@@TheArmedScotsman : Great You reminded me of Scotland Yard , Great Explanation video Man.
Great review.
Do yourself a favor and spend $25 on the MCARBO spring kit. It will completely transform the pistol for the better. Do it yourself and save a ton of money.
I did the same thing for my CZ 75B, the best $25 I've ever spent. I would also recommend getting the stainless steel guide rod & extra power recoil spring. I will be doing this with my PCR as well and want to get better sights too.
What's with everyone liking the PCR? I just bought one and it's the most inaccurate gun I've ever shot! It's terrible! I am so sorry I bought it!
Sorry to hear that. My PCR is super accurate. If you want to sell it I'm sure you won't have any issues seems to be harder pistol to come by. Best of luck.
its probably your trigger control. Long double action takes getting used to but CZ 75 is alot more forgiving then say an HK p30.
Good review on pcr, btw - California is not a communist state, on the contrary if you look up what communism is you would agree
I beg to disagree, Commiefornia is a disgusting place when it comes to anything worth a damn...
No California is definitely a commie state
Lol its a trend seeing stupid republicans get their panties in a bunch over Cali. Don't sweat them . their indoctrinated & brainwashed by Fox News propaganda.
California a communist state? Can you explain please? Thank you