i bought my vcds around 2015 from gendan in the uk when i had a mk4 golf gti....loved the car and thought id stay with the vag group....then bought two fords lol..but back to my vws again......today is actually the first time ive used it proper.....got a mk7 golf now and fitted new rear pads...it updated newer firmware when i plugged it in the car....i used youtube vids as a how too....worked great....took it for a test drive and all good,well happy....
oh one thing with mine.....i think it said not running.....i looked online and it said click stop....i did...and exited vcds..did the brakes then re did the vcds and think it said running then it said finished correctly...basically it was a bit different to this guide but not much
For anyone having ‘No response from controller’ problem. Try Select 03 ABS brakes Basic settings - 04 Start lining change mode Go! You’ll hear the calipers doing their thing Same process after work carried out. Select End lining change mode instead of Start lining change mode. Remember to wait 30 seconds after you hear electric motors stop
1:09 ... VCDS Fans - does anyone know if I can use my Schumacher 9275A-PE "Trickle Charger" (which I have), in place of a "Battery Charger" (which I don't have) ? The charger shown here in this vid costs ~$400! ---TIA
Thanks for the video! I got one question; you are already taking the key out and closing the vcds, no key in the ignition. So why would we need to have a battery charger connected to the battery? as there is no component needing some voltage...Thanks for the reply in advance!
Hi Great video but i have a question can you tell me why after performing function test the left motor shows a current draw of .133 amps mine does the same but i would have thought that this value should be zero regards
If change EPB control unit electric parking brake? Can code after having replaced EPB control unit electric parking brake. I want to change the EPB on my vw passat 2006 B6 1.9 TDI
I had this problem too. Try Select 03 ABS brakes Basic settings - 04 Start lining change mode Go! You’ll hear the calipers doing their thing Same process after work carried out. Select End lining change mode instead of Start lining change mode. Remember to wait 30 seconds after you hear electric motors stop
Some of the newest generation of vehicles are locked down with "SFD". While VCDS can be used to submit the tokens to unlock SFD, Ross-Tech has no means to get the tokens. We are working to have an official solution so that our customers can get the SFD tokens, but no release date at this time.
I DO NOT appreciate the FOWL language in this video....there is NO NEED of such VULGARITY to get your point across. That being said, I certainly appreciate this channel and the clear explanations of certain procedures. Thank you.
i bought my vcds around 2015 from gendan in the uk when i had a mk4 golf gti....loved the car and thought id stay with the vag group....then bought two fords lol..but back to my vws again......today is actually the first time ive used it proper.....got a mk7 golf now and fitted new rear pads...it updated newer firmware when i plugged it in the car....i used youtube vids as a how too....worked great....took it for a test drive and all good,well happy....
oh one thing with mine.....i think it said not running.....i looked online and it said click stop....i did...and exited vcds..did the brakes then re did the vcds and think it said running then it said finished correctly...basically it was a bit different to this guide but not much
For anyone having ‘No response from controller’ problem. Try
Select
03 ABS brakes
Basic settings - 04
Start lining change mode
Go!
You’ll hear the calipers doing their thing
Same process after work carried out.
Select End lining change mode instead of Start lining change mode.
Remember to wait 30 seconds after you hear electric motors stop
Excellent and clear video how to...
Very appreciated.
All this shit for something that worked fine for decades. A SIMPLE HANDLE AND CABLE APPLYING REAR BRAKES ,,,,FOR FUCK SAKE!!!!
I welcome the change to EPB. No more replacing rear calipers because the E brake mechanism seal has failed and its stuck on.
but did you connect the battery charger?????
1:09 ... VCDS Fans - does anyone know if I can use my Schumacher 9275A-PE "Trickle Charger" (which I have), in place of a "Battery Charger" (which I don't have) ? The charger shown here in this vid costs ~$400! ---TIA
Thanks for the video! I got one question; you are already taking the key out and closing the vcds, no key in the ignition. So why would we need to have a battery charger connected to the battery? as there is no component needing some voltage...Thanks for the reply in advance!
same
You may got a weak battery,and since retracting the pistons with electric motors it may discharge the battery a bit.
It may not be 100% mandatory on some cars,but they highly suggest this,so you don't run over problems with the epb module.
Hi
Great video but i have a question
can you tell me why after performing function test the left motor shows a current draw of .133 amps
mine does the same but i would have thought that this value should be zero
regards
Ideal thankyou - about to do this for my 2010 Tiguan now
Very well explained. Love this channel.
Can you test open and close EPB without doing actual job just to make sure everything works before taking it apart. Thanks
If change EPB control unit electric parking brake? Can code after having replaced EPB control unit electric parking brake. I want to change the EPB on my vw passat 2006 B6 1.9 TDI
Guys is it possible to enable the US Parking light in a VW Polo 9n3 (2008)?
I have a 2018 Audi s4 and when I click on 53 parking brake it says “no response from controller” not sure why need help?
Thank you sir, got it!!!
How did you get it to respond? Thanks
What was the answer to this please as mine is doing the same ?
Does it work on 2018 S4 or not ?
I had this problem too. Try
Select
03 ABS brakes
Basic settings - 04
Start lining change mode
Go!
You’ll hear the calipers doing their thing
Same process after work carried out.
Select End lining change mode instead of Start lining change mode.
Remember to wait 30 seconds after you hear electric motors stop
thank you
Is this the same procedure for a MK7 GTI?
So what exactly gets damaged if one doesn't follow the recommendations? The VAGCOM or the EPB Module?
The EPB mechs on the calipers or the EPB control module. These items do not take kindly to low voltage operation.
what about 2020- vag vehicles it seems only the dealer tool can rewind the calipers...
Some of the newest generation of vehicles are locked down with "SFD". While VCDS can be used to submit the tokens to unlock SFD, Ross-Tech has no means to get the tokens. We are working to have an official solution so that our customers can get the SFD tokens, but no release date at this time.
Top video
Good battery charger?
ctek mxs 5.0
I DO NOT appreciate the FOWL language in this video....there is NO NEED of such VULGARITY to get your point across.
That being said, I certainly appreciate this channel and the clear explanations of certain procedures. Thank you.
lol
Weird, i just used a 12v supply to the motor 😂
You are wasting your time if you have late model VW.
Useless
Saludos estoy buscando opinion sobre compra d HEX NET PRO DE ROSS TECH