Anycubic LCD Screen Replacement
HTML-код
- Опубликовано: 25 авг 2024
- Quickly replace the LCD screen for the UV light on the Anycubic on first gen and second gen circuit boards.
Double Sided Tape
amzn.to/3hw2Lr3
Replacement LCD Screen
amzn.to/3KcVUzd
Screen Protector
amzn.to/3CdJRPc
Anycubic Photon (Current Version)
amzn.to/3Khj3jL
How do you get the tweesers in there to remove the screen? mine won't budge
is your screen worked well after the replacement? after i replaced my photon’s screen, it doesn’t show anything with the test, like yours, and i think it is not working
you printed with your printer after the replacement?
Each time I have replaced the screen it worked except for once where the screen was defective and I had to send it back to Amazon for a replacement.
You will also want to make sure all the ribbon cable connections are tight
Holes in the print confirms that the LCD needs replacing? The rest of the print is perfect.
That is what I have experienced. You can run the print file without the resin or plate in place and confirm if there are spots that are not lighting up or not. Sometimes it will flicker and sometimes it will just not light up in a section.
did you use 3mm double sided tape for the screen?
No I used a generic brand off Amazon. The link is in the video description
@@TheOhayoDev to expand on that question, the link you provided is for a tape that has multiple width options. Which width do you buy? The link is for the 3mm option, but just wanted to double check that. Thanks!
@@DrumAtMeBro ah sorry about that. Yeah I use the 3mm tape. There is a little extra width on the short ends of the screens but it doesn't cause any issues or benefits. You could probably be safe to go with the 2mm as well but I'm not sure how hard that would be to apply.