How Did This Happen?! DISASTER STRIKES One Of Fab Rat's Own!
HTML-код
- Опубликовано: 16 окт 2024
- #fabrats #disaster
If it wasn't for bad luck we'd have no luck at all, seems to be the saying of the day in Fab Rat's shop. Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
Buy a Limited Edition Coronet Shirt and Receive a FREE Sticker!
Go to www.thefabrats...
We LOVE Onx Off-Road! Get 20% by using code FABRATS-20 or click on this link:
webmap.onxmaps...
More Videos You'll Love:
You All Have Been Asking What This Car Is For. Wait No Longer!
• We Barely Made It! We...
Michelle Got Into A Nasty HEAD ON Collision!
• Michelle Got Into A Na...
THIS might be the FUNNIEST Oil Change on the Internet!!!
• THIS might be the FUNN...
We're Definitely Not In UTAH Anymore! What Did We Get Ourselves INTO?!
• We're Definitely Not I...
We Found A Nasty Surprise In The Seats Of The Firebird Barn Find.
• We Found A Nasty Surpr...
We love Barnes 4x4. Check them out!
www.barnes4wd....
Check out Yankum Ropes!!
bit.ly/yankumF...
Use coupon code FABRATS at checkout to save 5% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729
Says something big, that a ‘rat comes home from a wreck, and immediately gets a hug from Mom…. THIS is the love upon which the family is built…. And why I keep watching… You guys rock ❤
That's his mom!
I agree wholeheartedly!
Ben - I’m glad that you survived that incident. The look on Grandma Lollie’s face… she sure loves her kids so much & she was very upset. It was a sweet moment; and I appreciate that you included it in this episode.
Jeeps can be rebuilt, but friends and family can't. Thankful everyone is okay and looking forward to watching Ben make a rig of his own!
Everyone needs to keep fact in mind when on the American highways. More than 100 people are killed on the American highways each and every day of the year...more than 100!!!
💯 I agree, 💩 happens everyday. People don't realize we're all dying. The question is how when and where..
Ben can drive
@@archieletsyouknow5508 I have seen a few tailgates like that but they did not have the safety pin in the latch and another one I think they used the 2 inch ball and not the 2 5/16 ball ,, maybe Ben's ball hitch could be worn down under size or out of round ??
@@randytravis3998 💯🤔 I say worn hitch. Happened to me on my little trailer and I don't even haul as much as they do. Cheap material nowadays everything's a disposable lighter👊🏼
Ben, I'm sorry that happened but there's nobody I have more confidence in than Fab Rats to make it right.
F
The love mom has for her favorite son comes through as sh is standing next to Ben’s truck as he drives it into the yard really shows. Glad no one got hurt.
Well that and the, "Darn, I thought I was done with that kind of thing with the sons." look
I am in the twin cities, MN and was out grocery shopping yesterday and saw someone with a fab rats hat and thought it was pretty cool to see more fans out in the world.
Sorry for your loss Ben. But as far as the beeper goes if you can get close to Matt and drop it off in the back of his car I think that would absolutely drive Matt crazy
he would go on vacation 🤣until Trevor found it
Brilliant!
“Sorry for your loss”😂😂😂 What do you plan to say when one of his family members dies?
The FJ40's came with a heater in the back from the factory. Yours looks like it will be better than they were. Glad that Ben is OK.
Man that sucks Ben, I’m glad you’re okay. But your attitude is genuinely inspiring! Thanks for being such a great guy and addition to this channel. Cheers!
Lucky it didn't swerve into oncoming traffic
Their poor mum was having trouble keeping it together, bless her heart. She's tough as they come, but when of your boys and your favourite grandson (was he in the truck?) come that close to serious injury, any mum is going be damp around her eyes. So glad it was just stuff and not people that were all chewed up, but you did a pretty good job of it Ben. Can you really rebuild that Jeep?
5:50 VERY good point!! ... And so awesome everyone can be lighthearted about the bent up, wrecked trailer, and jeep, and truck tailgate! "Stuff" can always be replaced!
PLUS it makes it a bit easier knowing you have the tools and knowhow to fix literally anything on a vehicle or trailer :) ... Sorry to see the stuff wrecked but happy no one got hurt! :)
Sorry Ben, that sucks. Glad you’re ok and have the ability to fix things.
That's the way to deal with personal disaster. Make the best of it. No freaking out, yelling, screaming. Just being thankful no one was hurt or killed. Things can be repaired or replaced.
If you guys need anything we are here for y’all! Just shoot us a message and we will help! Glad everyone is okay and safe! Love you all and let us know! Always wanna help rebuild!
Sorry about Ben's misfortune and I'm glad he survived it. When the dust settles, the boys need to determine what failed and share it with us so we all can avoid catastrophes. Thank you.
Happy to see you alright brother! We love our rides but at the end you can always replace it, can't replace a family member
Ben has such a good attitude. I’m not sure I would be so positive after wrecking my rig like that. Ben is the man!!
Seriously. Dude's just like "oopsies"
If you pulled on the ball and said, “It ain’t going nowhere,” you wouldn’t have had this problem. Really, though, glad you’re okay!
Thankful that Ben is ok. He’s the best part of the channel! Material things can always be rebuilt and replaced. You guys will have Ben an updated rebuilt jeep in no time. America🇺🇸
Glad to see Ben is OK. Having a strong and loving family and friends close makes all the difference. Can’t wait to see what y’all do with that rig.
Hats off to guys for being good guys.and playing out side the box
Oh Ben! I'm so glad you're safe. I know Grandma Lollie was scared just looking at that. You boys are the reason her hair is gray, lol I am thankful, that could have been so much worse. We just couldn't have replaced Ben. I mean it when I say stay safe and GOD bless!
So glad Ben wasn’t injured. Sorry for the jeep. I’ve heard of several people who’s hitch came loose and still hitched. I’ve never had it happen to me but that’s one reason I went to a gooseneck. I did change to bulldog hitches before gooseneck’s. Again thanks Michelle for the great video.
Ben has a great attitude!! Even in the midst of trials and disappointment, he has a smile!!! Keep it up you guys!!
LOL he had plenty of time for crying before the cameras got turned on
Just a thought on the heating problem. I had a small block Chevy 302 that just would not stay cool. I finally pulled it out and disassembled it. After measuring cylinder wall thickness with an echo device I found what we called, "Core Shift". When the block was originally machined it was not set in the machine correctly leaving two cylinders with thin walls. Boring it oversize had just made the problem worse. Back in the day it was common knowledge that only 1 out of 3 283 ci blocks could be bored .125 over. Good luck and stay safe.
Damn , Ben is very lucky that it did not take your pickup with it when it went over!
So glad Ben's disaster wasn't injury involved. Trailer towing can be real scary sometimes. Sorry about your jeep. But on the flip side I see a new Ben build coming up.
Ben sorry for your loss. TYJ you were not hurt. Bigger better jeep is in your future!
Scary!😦 it could have been way worse. Glad you are okay Ben!
Thank goodness you are good Ben. So sorry your wheelin trip was screwed. Like others have said, the jeep can be rebuilt YOU cannot. Prayers to keep you safe.
I am very happy that nobody got hurt during that highway mishap. I love the chirpy thingy . You all be safe and have fun fun fun !
Glad you are alight!
On a side thought, I want to say Grandma is awesome. I love when she just shows up. I’m also pretty sure I recently saw her give Hunter the bird and say he’s #1 LOL. I love it
glad to see hes moving around after a wreck like that sending prayers and good vibes
He was in the tow rig. He says so in the video. The jeep was on the trailer which disconnected and rolled. Thats why he is fine.
I think what they mean, is in that situation, the trailer could have easily pulled the pickup right off the road and flipped it also. Which is why I prefer to always have a rollbar in the pickup, also.
Not saying this was the case here, but sometimes guys put a 2" ball into a 2-5/16" coupler which will separate. I don't think he did that here, but possibly the coupler was bent internally or out of adjustment or something that just let it be just loose enough to slide up and off?
@@scubasteve7946 All valid points for sure.
@@Bobbywolf64 oh man, our neighbor literally did this same thing by our driveway about a month ago. Luckily the trailer didn't flip, but he was sure embarrassed 😳
ben im glad you are ok this remind me one time i was pulling a car with a dolly and it came off the ball it was so scarry but my car and the truck and my self came out of that with out a scratch so i cant imagine what it felt to see your jeep and trailer all over the road. im gladd no one got hurt in the accident take care and thank the lord because he was on your side the hole time
Glad Ben is ok. Trailer wrecks are so scary. A while back, I had a 16ft flatbed start swaying on the interstate, it put me into a concrete wall and flipped my truck.
Yikes! Did you have trailer brakes?
@@randallsmerna384 I did, but at the time I didn't know about trailer braking or tongue weight. Got a hard fast lesson.
Glad Ben's okay.
The ol' "Annoying PCB", one of the great classic gag props. You can literally drive someone crazy with one of those.
Happy to see your smiling face Ben , the ride can be fixed , brothers can't be replaced !
Glad you didn't get hurt Ben. I've got a '79 Datsun 620 4x4 king cab project I'll give you a good deal on if you need a platform for your next trail rig, though it is in Arizona.
The best part is nobody got hurt and that’s what really matters blessed you are!
Wow! Glad that it's only vehicles that got damaged! Crazy bad things happen when trailers come loose. A few years ago, someone was killed by a large BBQ pit coming loose.
Dangit man! Y'all need to make a series building Ben's keep. That way he can be back wheeling in no time. That is a huge bummer but Ben has a great attitude about it. He has made this channel even better! So help the guy get back on the road!
Ben has definitely made this channel even better!
Hi Ben am so glad you are ok & are safe and sound. You can fix your Jeep .
Your family & friends are happy that you ok 👍
I am glad that Ben is ok. I miss rock crawling I sort of live crawling vicariously through you You and the rest of the various crews. Matt's Off Road, Bleepin Jeep, R.A.D etc. I hope to come and visit your store and shop this coming summer. Thanks for your quality content and work to make entertainment and education for us all
Really enjoy your brotherly pranks... & Hats off tho Michelle, who cranks out this FabRats channel! 👨🔧😎🎉🌮
😮 Glad everyone is safe. A friends new trailer had a cast piece in the trailer’s hitch. The manufacturer had bought all or made all couplers to 2 5/16 hitche standard and had installed a simple (permanent) cast insert to make their lighter car haulers 2” ball compatible (trailer stamped 2"). Luckily this one that failed fractured - broke and fell out as I was hooking up. It looks like Ben’s triple ball hitch is in 2” mode.
Great point !
nice custom job, ben, good to see ur still with us, had very similar action packed adventure , only trailer stayed hitched, 180* on two lane interstate bridge, '70 el camino w/ skyhawk on towbar. took 6in. off front bumper b4 rear bumper gave towbar access to complete the 180. skyhawk received worst impact from center bridge rail, had to bolt spare on inside-out ,zero offset, tools, spares, scattered across both lanes, thankfully we only took up inside lane as semi right behind us had room to slither by flinging wrenches his tires picked up on way by. I'm sure ben can attest to quickness of the adventure and no time to get excited until its over n damage is done. always thankful for days we get to share the miraculous adventures n never ask how or why, just that we get to....
It's nice of Ben to provide future content for your channel with his Jeep.
Nice! All the thoughts and prayers comments are killing me. Drama gets views!
Thankful that you are unscathed Ben. You know we all drive down the road, pulling trailers and not - sometimes bad stuff happens. Glad that it was just mechanical damages.
Glad you're OK, Ben, and that nobody else was hurt.
Ben, we’re just happy you’re ok. And now we get to see the new build.
Glad to see Ben is alive and well. Take care and thanks for sharing.
I've rolled two trucks. You get to see if the roll cage works as designed. Good thing you guys know how to fix stuff. BFG's were the best tires I ever had, and that was 30 years ago.
Awh! His mama sure loves him. Glad you’re okay Ben, like everyone has said vehicles and trailers are replaceable, you aren’t brotha! Can’t wait to see the build
Ben, I am so glad that you are ok. So sorry about your Jeep and Trailer but I know you and Paul well enough to know that you will fix better then before. So glad that you are ok!!!!!
Good to see Ben 's sense of humor intact.... as well as the rest of him. It just give you guys another project we all get to watch
Ben is so chill, he wads his Jeep and trailer up on the way to Trail Hero and it’s just like no biggie.
He still has a smile on his face, so glad he is ok👍😎
He was on his way to Paul's to prep the jeep for trail hero
Wowzer Ben! You are your own demolition derby! Just glad you were not injured. Stay safe there man.
Morning all from Siesta Key Florida
Quartz sand with a beautiful location I'm not mad I'm jealous 😄
Oh my! Ben, I'm so glad you're OK! The Jeep will be better than ever when you're done with it!
Wow, Ben, glad everyone is okay. As bad as it seems, that could have been a lot worse!
Glad you're okay, Ben! Sorry about the trailer and jeep. Need a t-shirt to help fund that re-build! Let's go, @Fab Rats!!!
I glad Ben's ok, it's funny when Moms playing around on camera Ben does it 3 seconds later. Ben should build a Yota also. Because Pauls is so bad ass. How's Randall? Please stay safe!
Off-road people are about the only ones that look at a bad break or bad wreck as a chance to build something better. I sure am glad Ben is okay. That must have been a wicked wreck.
Don't bitch about bad luck, you guys are living an amazing life and have great family around you to do it.
I'm so glad that Ben is okay and that no one was hurt. I also really like watching brothers get along and working together! You guys rock! Thanks for the great intertainment!
Brother,I'm so glad to see you're alright after seeing the pictures... before I got my spine hurt, for yrs I was a firefighter at lake of the Ozarks & I've cleaned up a many people who were not so lucky... the Lord was with you on that one brother...I know from experience, your mom's going to be needing extra hugs from you for a while... take care everyone
Glad Ben is OK. Excited to see the rig you guys build for him
WOW!! That's Crazy. Remember the movie "Fast Times at Ridgemont High." When Jeff Spicoli said during the Z-28 joy ride. "My Old Man is television repairman got this ultimate set of tools, I can fix it." Least your doing good. Can be back on the trails again.
That quote becomes pretty dang silly once you grow up and actually be acquainted with tools 😂😂 Like yeah dude I'm sure he's got some incredible screwdrivers - his soldering iron is really gonna help!
Man I'm so happy you're ok Ben. This could have been so much worse. I hope your rebuild is a great experience and a great result
Ben, I've been there! Glad you are safe! In mine, I ruled the Excursion i was towing with also!
Glad Ben is okay and no one got hurt. Really enjoy your channel,keep up the good work. Just ordered a t shirt and a hat.Can't wait to get them and keeping my fingers crossed I win the car.
Sorry about your Jeep Ben. My daughter rolled mine about a month ago! She's okay and I'm glad you are too! You also have the skills to rebuild yours, I do not however....
Glad everyone is okay.
Thank you for showing me how is like in part of the world and all the fun to be had. Do it while you're young I say. Gosh landscape is real nice. Enjoy
Goes to show that accidents can truly happen to anyone, even the most experienced people aren't immune.
Omg Ben I am so happy that you are okay and nobody else got hurt. Years ago a friends wife was killed by a trailer that came loose, crossed the median and hit them head on. It's a scary thing and you must have had a guardian angel watching over you. Can't wait to watch you rebuild the Jeep. God bless yinz all
Glad you are ok Ben very crazy situation can’t wait to see what you build
Poor Ben, it broke my heart seeing his Jeep all twisted up like that, but it’ll give us another build to watch. Bigger, better, badder!
Glad Ben is okay! Sucks too see this kind of thing happening, but it could've been much worse!
Glad to see that no one died in that accident. I saw this happen to a Jeep Wrangler on the interstate in a rain storm. It seems to be Jeeps with good articulation of the suspension. There is a God that takes care of fools and small children. He is still taking care of me today at age 72. Carry On.
Michelle, this comment is for you specifically. I really love the channel, the content, the family and the cleanliness of it. You keep the videos under 30 minutes which is very important to me. I have no idea the amount of time you spend editing but THANK-YOU! I'm not looking for anything free, lol. One more thing, how about a way to send pictures in to show everywhere the FabRats shirt is worn, vacations, restaurants, church?
Again, thanks
They have an Instagram account, so it wouldn't be hard for them to showcase pics there.
I did that for a bit with my business. I gave out shirts and told people to show me where it got worn. One guy went on a trip to Germany and snapped a pic wearing a shirt. It was fun doing it.
That FJ is one heck of a rig. I hope you guys can build Ben something almost as good. Can't be out doing Paul...lol.
Suggestion: Put something in the shop and allot the proceeds to Ben's new ride. Love to help him get a new rig goin.
I would think mounting it to the roll bar in back would offer better heat exchange I mounted one in that area and it worked out great
Agreed underneath on the frame is a waste
I see some Miller welders in the background now. I remember you used to have the Hobart. How about an updated tool and shop tour 🙏. What do you have, like, want.
Keep up the great work. Thanks for sharing and teaching!!
You guys have the best out look on things 👍. Love the content 👍
Awe Ben, I am so sorry about your Jeep. Glad your okay. Time to build the Jeep of your dreams!
Glad you're okay Ben. Just gives you something else to play with and make bigger and better.
Oh no! Just glad no one was hurt. Glad you are ok Ben.
this is why properly load balancing a trailer is so important
I'm sure it had trailer brakes but I'm wondering if it would be beneficial to have a big panic button that a driver can hit that would immediately lock up the trailer brakes and if that would make a difference???
In my head, it would seem that if the trailer breaks got locked up everything went straighten up in a jiffy.
Also, this is a great reason to put much heavier duty safety chains on trailers.
Those chains are often so small and so weak that they always break. Make sure you get some hardened, heavy duty, large link chains and replace those cheap ones.
Glad Ben is OK. Really lucky the truck didn’t flip. I hid a bell under my brother’s truck. Drove him nuts for about 2 months. 🤣
Hey guys about your gas line in the tank. You have to get the kind of gas line that is submersible. Regular gas line is only treated on the inside not on the outside. I hope this helps.
Glad your safe Ben! ….paul, I wouldn’t be surprised if your overheating is coming from your intake placement. Heat gets trapped against the firewall, and your sucking hot air off the firewall you could cut and plumb the intake through a hole in the firewall so the intake is in the cab… if you got the room for the maf you can flip the intake manifold even so you have more room and less piping. Just a thought. Now that the intake tube is metal, after wheeling, pop the hood and touch the intake tube to see how heat soaked it is.
2:00 - I get it ... I built one of these froma Jaycar (Australia) kit. it chirped until you said "Cricket!!" and it shut up! Left it running in the shop... fun!
Also about your heat problems with your vehicle, mount the extra radiator where you have clear air to cool down with. Somewhere in the bed if possible.
Ben, I’m glad you’re ok. The wrecked jeep looks terrible. Stay Safe.
Ben has got a great out look on everything!!,good job Ben!!
So So Glad you live in the sticks. Sorry about your Jeep. Happy beyond words you have a smile.
Build that old Dodge Pickup cab into a crawler
Id call it a hell of a lot of good luck and Gods Grace, you didn't hurt or kill anyone else on that highway!
I know the feeling had my old cj5 on my bosses trailer. Just a worn out hitch and I watched it go into the fence row. Glad you are ok can’t imagine losing a trailer at highway speed.
Ben, i’m really happy you’re OK you’re an excellent mechanic and Paul is happy to have you I know you guys are good friends that’s why we think God that everything was OK with you and you survive the crash thank God you were in another vehicle keep up the great work you guys make a great team I love you guys and I love watching you guys
Ben, sorry for your loss. That's a shame. Glad you're okay.
That would be awesome to be there in person to watch and experience in first hand..... I thought ditch banging in a 4-wheeler was off-roading until I started watching y'all with Jeeps...LOL!