**HOW TO SERVICE** YOUR **NEW SUZUKI OUTBOARD** PART NUMBERS INCLUDED
HTML-код
- Опубликовано: 16 июл 2024
- In this video we will cover everything you need to know to service your Suzuki outboard including part numbers!
#suzuki
#outboardmotor
#boatmaintenance
**CHARTER TRIPS**
Call Captain Jody at 251-465-1598 for your next Alabama or Mississippi Flounder gigging/Saltwater Bow Fishing Charter!
Visit my website at bayoubanditcharters.godaddysi....
Join my Facebook group--- / 284925919867754
**BIG THANKS TO MY SPONSORS**
FISHBITES---fishbites.com/
5 Star LEDs---5starledllc.com/
HOBO CUSTOM RODS--- / hobo-custom-rods-llc-1...
Performance Fishing Electronics--- / performancefishing .
Fish 419 Performance Gear discount link--fish419.com/discount/BAYOUBANDIT
Hawk soap company-SKEET-R-HAWK all natural bug repellent-- use discount code 15BAYOUBANDIT---hawksoapco.com/
**BAYOU BANDIT'S TOOLS OF THE TRADE! **
Bubba Blade battery filet knife---amzn.to/3xoOKob
Mr. Twister replacement blade for Bubba knife---amzn.to/3v84MjD
Dexter Russell skinner knife--- amzn.to/3vDpc5C
Knife sharpener---amzn.to/3O3eHQ7
Fishbites Dirty Boxers---amzn.to/3E3HO16
Fishbites Butt Kickers--amzn.to/3JyvQhd
Catfish skinners---amzn.to/362eifx
Deluxe tackle bag---amzn.to/3KOgqqF
Runcle watertight box---amzn.to/3uyFtIy
GoPro Hero 10---amzn.to/3jwGTNj
Saltwater fishing scissors---amzn.to/361M84i
Onboard 3 bank battery charger---amzn.to/37EOF4N
Washdown pump kit---amzn.to/3rk05Sy
12v aeration system---amzn.to/3JKpSdj
Compact pump sprayer for boat clean-up---amzn.to/3KwQijG
Salt-away---amzn.to/3LTk96c
Mixer for Salt-Away---amzn.to/3uwOyl6
As an Amazon Associate, I earn from qualifying purchases Кино
Good video. As a Suzuki mechanic from sweden i miss The diagnostic and The service reset. Next time let the gearoil rest turn the propeller and top up. I spend 2,5 h on the first service to check that the engine is ok.
I could be wrong, but I believe the Suzuki service manual has you wait a few minutes after you see oil come out the oil level whole, then spin the prop a few times, then push some more oil in until it comes out the oil level hole again. The extra few ounces I’m sure is insignificant but take it for what it’s worth.
Good video. Contrary to what everyone seems to think, Amazon is expensive, and is notorious for counterfeit. My boat dealer put on a big aftermarket Yamaha spin water separator fuel filter and told me to religiously change it every season. I have since learned that most of the boat dealers here put them on every boat they sell.
Great video. I have a pair of 2015 DF200As and this was very helpful. Thank you!
Glad it helped, thanks for your comment!
Getting ready for my 20 hour! Great video brother!
Thanks brother!
Love those new Suzuki outboards. Also, saw you headed west on I-10 in mobile pay weekend I believe it was. Headed to the bayou I assumed. Tight lines!
A good possibility brother!
Thank you for the video.
Great video !! I've got a Yamaha 150 and I tilt the motor up and down 3x after I drain the oil. I would say another pint comes out.
Thanks for sharing this detailed video.
Yes sir! Happy to help!
Awesome job on showing the service
Thanks brother, happy to help!
My Suzuki is much older than yours...I usually do my maintenance around February. I'm looking forward to the water pump video, I usually have my maintenance guy do it so that I don't screw it up
Lol ,me as well. If I want it done right, have someone else do it.
Great Video 👍
Thanks brother!
Great video Captain.
Thank you brother!
Cool 😎
Hi. Great video, part number for lower gear oil dispenser please.
I always drain lower unit in a see though jar an inspect for water even on a new engine.I didn't see the spill proof piece suzki is dragging about in there brochures, under oil filter will continue to use suzuki oil for the life of the engine?also is there an alarm for next oil change? are both always changed at same time?what type of grease are using?
I might be wrong but I think on the AP model there's a grease fitting by the electric shift solenoid
You may be right, I’ll have to check that out. Thanks
Ty
Yes sir!
Awesome job buddy great video are the 200 the same as the 250 SS outboard
Should be very similar
Great video ! I’m looking to buy a Suzuki or a Honda I’m leaning toward the Suzuki
Thanks brother! Im very impressed with this motor! It’s been flawless, tons of torque, and more fuel efficient than my Honda 150!
@@bayoubanditcharters thats great info for me . I have been wanting to repower my boat for the last year ive heard great things about the suzuki . Your videos are great !!
Thanks, definitely appreciate it.
Also, when you bolted that fin on your lower unit, it didn’t mess with your warranty through Suzuki? I had just heard back in the day if you bolted something on like that on a Yamaha, and had to drill holes in it to instal, it would void your warranty. You know anything about that?
No holes were drilled in the motor, the top and bottom are bolted together on the outside of the factory cavitation fin
Captain Jody where did you find that pump you filled the lower end with?
My local Suzuki dealer, but I’m sure you can get them on Amazon
I live in Michigan and I have a Suzuki 200 HP also mine is a 2021. Do you think I can use all the same parts that you used? I also wanted to know it you ever had to winterize your motor? have you ever had to flush it with blue antifreeze thanks.
It should be the same. I run charter trips year 12 months out of the year, so no winterizing for me!
Thorough, very clear instructional video - thank you! Did you perhaps discuss doing your own service with your dealer? I'm wondering whether it might put the warranty at risk at the (U.S.) distributor level where major warranty coverage has to be reviewed. Good luck on the charters this year!
Yes, no issues with warranty as long as you use Suzuki parts and keep your receipts!
@@bayoubanditcharters Thanks for the quick answer, Jody. Watching your 100 hr. service now, once again very well done.
Daybreak marine in Pensacola, Florida wanted $800 to do my 20 hour service on my 200 Suzuki I’m being generous by saying the oil and parts cost them 150 bucks
650 in labor for one hour
Lol, yep!
@@bayoubanditcharters I’ll do it myself for 150 bucks. They’ll never get any work out of me not at that rate. I wonder how much they were gonna charge me to install my Laurent with the 12 inch screen probably more than the unit itself.
Your voice sounds just like the dude from Dan O’s seasoning
Lol!
What oil did you use for break in. Just put a df40 on my runabout and am conflicted. I am a factory recommendation type guy, but thought a conventional should be used for breaking in motors. It may be an older way of doing it, I am new to modern 4 stroke fuel injected outboards. I'm an electrician not a mechanic.
Same Suzuki oil. I show putting the oil in on my install video!
@@bayoubanditcharters ya, that's what I figured. From all their literature I've seen they don't say anything about using conventional for break in, and I like to stick to factory recommendations. Awesome Suzuki vids, though your motor is a bit different than mine they are similar enough to show me what I need to do for basic service. I'm gonna check out your fishing stuff. We love fishing up here, pike, trout, smallies, walleye, etc. You know Northern fish. We used to catch flounder and sea trout (i think they called them speckled trout) down in NC when I was a Marine, so I am a bit familiar with what your after. Thanks.
How did you change bottles of gear case oil? Did you just pinch a hose?
It actually has a built-in check valve on the hand pump! So no need to pinch the hose.
What are your thoughts on the zuki so far? What kind of speeds are you seeing and do you ever feel like the 4cyl isn’t enough motor? I’ve got a 21’ flats boat and my dealer swears it will do just fine. I’m just nervous to spend that much money and then kick myself over it 😂
I absolutely love it! Plenty of torque and power! My boat is heavy built and flat bottom, loaded with a full crew and all the gear it will run 42 at 5800 and with just me it will run 46 at 6200. Power tec. 15 1/4 x 20 pitch heavy cup 4 blade
@@bayoubanditcharters That makes me feel better! I’m probably 1650 lbs loaded. Praying to at least be mid 50’s mph wise. Thank you man!
Great video.! My lower unit flooded me when I dropped the drain plug. Does that mean my seals are bad? I have about 400 hrs on it.
Was the oil milky?
Nope. Looked clean. It came out in a hurry and soaked me! Lol
@@gobraphil I’ve never seen that happen if the top plugs are in? If the oil was clean, you should be good.
Do you have to reset you motor alarm or will it automatically do that ?
Check out my new 100 hour service video. I show in detail how to reset the alarm!
Thanks
Kisiera la explicación en español porfavor
How many hours are you expecting to get out of this motor before a major issue?
5,000-6,000 hours hopefully more.
does it use the same grade oil on a suzuki 70 outboard
I believe so, but not 100% sure
@@bayoubanditcharters ok thank you.
Which Suzuki Dealer do you use?
L & M
@@bayoubanditcharters Gotcha. So you mut live across the bay then?
George's Watersports
How to reset the alarm?
Turn the ignition switch on, remove the emergency lanyard, pull out the stop switch button 3 times within 10 seconds until you hear a beep, turn the ignition switch on and reinstall the lanyard!
Where is the emergency lanyard ? I have 150hp
When you do the 20-hour & 100-hour service yourself, how do you document this service so Suzuki knows? This is pretty simple and it's nice not to save some $$ and not pay a Suzuki dealer to do such a simple service.
Buy all OEM parts from your local dealer and keep your receipts.
I hate to tell ya, but somebody done scrapped the paint off of the skeg 😮
Lol, it happens in that skinny water I’m always in!
noticed that too..
That's what the dealer charges you $200 for?!?!?!!
Where in the hell do you get that for $200!!?? I paid $480!!
@chestypuller1300 I was just guessing! I just dropped mine off for the 20hr. Now I'm scared
@@CRNFLK77 hopefully you’ll come out better than me 🤣🤣
@@chestypuller1300 I'll let you know!
@@CRNFLK77 sounds good
Can you overfill the lower unit? I let the oil come out the top hole 😳
If you have 3 holes, you want it to came out of the second hole. If you have 2 holes, you want it to come out of the top hole.