How to remove John Deere Quick Change oil filter for ever.
HTML-код
- Опубликовано: 8 сен 2024
- How to remove the $50.00 quick change oil filter and put on a regular oil filter. Plus you will now be able to drain all of the engine oil!! *NOTE* John Deere quick change conversion kit is the way to go!! Here is my newest video showing how to install the John Deere Kit. • How to Remove the John...
John Deere Conversion Kit. amzn.to/42Qx2rk
Briggs Oil Filter amzn.to/3j6FNaM
Parts in the John Deere Easy Change Conversion Kit. AM131611= drain tube, MIU13767= Adapter Fitting With Hex, AM125424=Oil Filter, and MIU13767B is the entire kit
What are your thoughts on - if I keep the oil filter easy change - but use a siphon to remove the old oil from oil check port each time I do oil change ? And then add equivalent 1.2 qrts with a new .8 qrt easy oil filter
My opinion, you will not get all of the oil out and you are still paying $50 plus for the easy change oil filter plus extra oil. I made another video using the John Deere parts and it should be easier to change over. Check this video out. ruclips.net/video/IzgsX3IHbEg/видео.html.
Can't believe J. D. Pull a piece crapp like that on these mowers. I guess it's their way of generating engine trouble down the road for customers thus increasing engine and parts sells. Think I will look at different brand of mowers. Great video a true craftsman.
A very well done and well presented instructional video! I just ordered the parts which basically came out to the cost of one of the 30 second oil change filters. (Oil not included). I have an E120 JD and I’ve always been a bit skeptical of their fast and easy oil change system. Once you see how much old oil that is left in the crankcase, this change-out is a no brainer! Thank you!
Thank you and thank you for the kind words . I’m sure your engine will thank you in the long run!!
Excellent video, direct, informative, precise. Don't think you could have made a better video my man, keep up the good work, and thank you for this video!
Thanks Dan, and thank you for watching:)
Very nice job. I add a small extension pipe to the quick oil change device to get it further out just past the frame. Makes it easier on some engines, especially the Kohler's. Thanks
Thank you. Yes, you could do that.
Yup, stick extractor hose down dipstick tube!
I'm going to change mine as well, the threaded "nipple" from John Deere parts actually has an "allen" head to tighten it with. I also cheat on the oil changes, spent the $30 for a oil extractor from Agri-Supply .. no oil messes, pulls the oil out of the dip stick hole.
Performed the conversion a couple weeks ago based on this video. Goodbye to the $50 filters! Thanks for taking the time to provide this information.
Hi Bruce, and your engine will last longer too!! Thank you for watching my video and the kind comment. Please give this a like and tell your friends about my channel to help it grow! It would be great appreciated.
Very informative, I played back several times to install my kit. By the way that plastic cover on the new drain plug can pull right off, there is an oring in there. Then use a tall 15/16 socket . I purchased the whole kit from Amazon which also included a filter. Thanks for great info.
I’m glad it was helpful! Thank you for watching.
Nice video. It is nice to also add a short pipe nipple to the new drain plug and let it stick out of a hole in the side shield. The square headed pipe plug hole is just NPT standard pipe threads. Then you don't have to remove the shield any longer to change the oil and it will run easily into a drain pan.
Thanks but the new video I put up has everything from John Deere. Check this one out. It has the longer tube with a quick end on it. ruclips.net/video/IzgsX3IHbEg/видео.html.
I like the quick change filter. No problem and oil looks clean. You might have to add an oz or two after every other oil change but other than that I'm happy with it. Been using it for about 8 years now or whenever they camd out with it.
30-50 hrs and oil is just a dark amber ready to be changed. so easy
On my John Deere LX255 I removed the square drain plug and replaced it with a pipe nipple long enough to get out past the frame and used a hex cap so I can use a wrench. No mess, no fuss.
Hi Warren, This was my first attempt video on that subject. I made a better version with the John Deere parts that does include the extension with a cap. Check it out. ruclips.net/video/IzgsX3IHbEg/видео.html.
Very well done video! I have this exact mower, fixing to give it its first oil change and bought the needed items to do this change over; only difference I may do is on the drain plug side is see if I can find a brass hose barb fitting and stick a rubber hose and plug set up. Again great instructional video!
Hi Chad, I’m glad this was helpful and thanks for the kind comment. I hope your able to get the hose. I have seen that set up before.
Superb!!! Debunking the engineering deficiency and incompetence, and the commercial greed of John Deere.
Thank you! Well said!
Super awesome video. You are extremely organized and thorough. I’m going to check out a few more of your videos. Thank you for painstakingly organizing, editing and setting up these videos and sharing your knowledge with your fellow man.
Thanks Shane, I'm glad you liked it and thank you for the kind comment. Please give this video a like, subscribe and tell your friends to help my channel grow. it would be greatly appreciated!
Very nice viddeo. Not sure what John Deere is thinking regarding their new oil change system. As most will know, you should change all of the oil when you do a change. The replacement kit does that.
Wow, that's crazy JD came up with that expensive system that leaves so much old oil in the engine! I use a fluid extractor to change oil on my mower. With the oil nice and hot any contaminants are in suspension and the oil evacuates quickly.
Nice!
It is very important to replace all the oil and the oil filter no matter how you do it. Changing only part of the oil is like only cleaning part of a dirty dish. Would you want a dishwasher that that leaves over half of the food and grime on your dishes? Gross! Partially clean is still dirty.
Thanks for the help. Just followed your video on changing the drive belt, and it went like clockwork. My neighbor has this model, and gonna help him get rid of this oil system. Hard to believe JD would put this out there.
I’m glad my videos are helpful to you. Thank you for watching and commenting. I was very surprised when I did my first change over and I had to make this video.
I just performed this conversion. I recommend using the Deere parts. The nipple replacement for the filter with the Deere part number has a 12mm hex form making that installation much easier than shown in the video. Also, the quick release drain extension with the Deere part number puts the hex head out near the end, allowing the use of a 24mm standard socket and easy installation. Also, running the engine first, makes any oil change much easier, as the oil is thin, and doesn't take near as long to drain (same goes for bottling honey, by the way).
I agree about using the John Deere parts. I did this video before I new about the parts from John Deere. I always run the machines before performing any oil change. NOT when filming a video as shown. Thanks for watching!
Thank you for this. I have always been skeptical of this system. I will make a big mess one time to save a engine. Super Clean is cheap compared to a new engine. Thank you for posting.
Yes, definitely install the John Deere kit. The parts link is in the description. I am looking for another tractor to perform another video with the John Deere kit. No special tools needed. This video will get the job done. Thank you for watching and commenting. Please give this a like and tell your friends about my channel to help it grow. It would be greatly appreciated.
Big brain at work here. Well done. The "plastic piece" at 05:48 is a *keeper*. Good camera work, and efficient editing and labels. Love the intro iterating the parts and tools. On the replacement oil filter nipple, I could have sworn there is a version that has a 12mm hex internal form.
Hi Brian, Im glad you liked the video and hope it was helpful to you! I think you are correct about the internal hex and I just tried to look up on the John Deere web site and did not find anything but the nipple that I use in this video. If you come across the one you are talking about please send me a part number and I’ll try and put in in the description of this video.
@@JohnsonsSmallEngines The filter nipple is Deere MIU13767. This is *much* easier with its internal 12mm hex, than the internal pipe wrench with which you were messing.
John Deere sacrificed the performance of the engine to make a buck! Clasic. Thanks man.
Very good video. I didn't even want the QC filter system, but I got such a good deal on my E160 I just accepted it. Next oil change, I'm doing this mod for sure!
Use the John Deere kit part number so it will be even easier than this video. I’m waiting for another one to come in so I can make another video using the kit. I think there all out of stock on Amazon but I’m sure you can order one from your nearest John Deere dealership. Thank you for watching and the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
Let me tell you that you do have really clear explanations and images on your videos. Thumbs up dude! Continu your good work... It's appreciated. 😁👍
Thanks Frank. I’m glad you liked the video and I hope it was helpful. Thank you for watching and commenting. Please subscribe and tell your friends to help my channel grow:)
Excellent! Very well done. This will improve the life of the engine dramatically. Thanks for making this video.
Thank you! I’m glad it was helpful:)
Good and clear presentation! Thank you.
Thank you. I’m glad it was helpful:)
Great video, just bought an s130 and will be doing this mod at first oil change.
Hi Sean, thank you! Check out the link with my updated video using all John Deere parts. It is a much easier kit.
@@JohnsonsSmallEngines thank you will do!
Excellent video! The presence of this "improved" oil filter is enough for me to probably give these new John Deere lawn tractors a pass. What genius came up with this "improvement?"After you finish the conversion, do you add oil through the dipstick hole? One more quick point--the Briggs & Stratton "normal" oil filter screws in where you romoved the "improved" filter and hardware, right?
Correct on both. Use the John Deere conversion kit. I put it in the description. It is easier to install and you do not need special tool to install the nipple adapter.
I am regretting everyday buying a John Deere! I wish I would of chose Husquavarna. Not happy with it at all. Videos like this make me know my gut instinct is right. Love your teaching skills. Thanks.
Hi Michelle, thanks for watching and the kind comment. John Deere are not bad for the price. The truth is, the more $ you spend the better product you get. Unfortunately most of us do not want to or do not have the extra $ to invest in a higher end machine. Husqvarna also just like John Deere have inexpensive and better quality machines so again you may not have been happy with a Husqvarna purchase depending on $ spent.
So much for my easy quick change oi filter being quick or easy. Have to change it with a healing broken ankle and knee scooter so this should be fun.
This seriously stupid oil filter and belt issues kept me from buying John Deere ever again. I'm now an official Cub Cadet man!
Stephen Williams
Well this is good to know, I just bought an S130 and I am wondering if this works on the S130. I am a strong believer in changing all the oil, after looking at the video i see that changing the oil completely is going to be a neat trick.
I do believe it will work with your engine. You may want to call John Deere. I think they also my have all parts needed to change it over or you can do it my way.
Another excellent video. I shared this on the john deere channel. Hope this gets you more subs. (deservedly so)
Very good video! My D140 is like new; will probably never have an S series.
1:44
"internal wrench" set to install the nipple into the engine. . . I just watched another video demonstrating this same conversion, and he used a 12mm hex, if I remember correctly. Although to be specific, he used John Deer Part # MIU13767 for that nipple, so it's possible that the internal hex is slightly different.
Yes, I need to make another video using the John Deere kit that I have in the description below. The kit comes with the hex adapter.
Wonder who was the brilliant designer of that quick change system.
It was a marketing ploy by some idiots who know nothing about engine maintenance. No self respecting engineer or mechanic would ever think of something so incredibly stupid.
As with the computerized bullshit getting locked down in Deere equipment. These people are the screwerovers of the machine industry, and I ain't putting up with it.
Husqvarna here I come.
Very helpful thanks.
Thank you but check out my newer video on this subject. It is much better! There should be a link in the description or watch this video. ruclips.net/video/IzgsX3IHbEg/видео.html
Great video this J.D. filter is a joke. I will do the change thanks to your video !
Make sure you check out my newest video in the link in the description below. It shows me using the John Deere parts to swap out. It is easier than this video. Thank you for the kind comment. Your engine will be much happier in the long run!!
Спасибо Дружище. Я себе присмотрел deer S120. Всё очень подробно все очень понятно. Весь инвентарь инструментов и запасных частей все очень круто!
The part u put on for the oil filtet to screw on looks different from the one I bought mine had a hex shape on one side and the other side that goes in the mower is just round
You most likely purchased the John Deere kit that I now recommend. You have the easier adapter to install. Here is my newer updated video ruclips.net/video/IzgsX3IHbEg/видео.html and in the description has tools required.
For the most part, I despise those pipe plugs for oil draining. They're an old design for using a crescent wrench...which you practically can never get to on a mower. My LA130 already has an extended drain, but the mower that didn't I just installed a 6 inch long 3/4" pipe nipple and sealed it off with a pipe cap. Seriously, who wants motor oil running all over their mower frame??
John Deere had a nice kit. I put that in the description. I agree with you. The next machine I get in, i will remake the video and will fit with the John Deere kit into it.
I gave about 70$ for the large filter {filled with oil) air filter, gas filter, sparkplug.
thank you for doing this it was very helpful
I’m glad it was! Thank you for watching! Please subscribe and tell your friends to help my channel grow ! It would be greatly appreciated:) take care!
Is the process the same for the JD 170? Thanks, nice explanation.
I saw down below where you give the oil filter info for the 170; is the oil drain plug the same as you used?
If it is a Briggs engine it should work. Watch my newest updated video using the John Deere kit in the description. ruclips.net/video/IzgsX3IHbEg/видео.html
Great video 📹👍🏾...
My friend will this work for the S170 John Deere... Just ordered one from the factory..🤔⁉️
Yes
@@JohnsonsSmallEngines Thank you so much my brother for the speedy reply... 💯🚜
Great work, nice video. I have John Deere S160 it comes with easy oil change. Can I change it ?
Thank you, yes you can change it. Thanks for watching and the kind words.
@@JohnsonsSmallEngines Can u tell me where I can find parts I need to change? I already have tools in u video, but I have no idea what kinds of parts I should get for my John Deere S160 mower oil filter change.
All part numbers are there for you. You can easily find them most likely locally or order online.
What is your website?
By removing the filter, does that void the warranty on the engine? Thanks for the vid! 👍👍. Is there any way to use a fluid extractor to get the oil out...just a thought. Not crazy about that quick drain device.
That is a very good question. I would check with John Deere for that info.
To my knowledge if you use John Deere parts which are available to complete that task , it will not void your warranty
Great content
Thanks for the video. Could you just leave the quick change filter intact but add the oil drain and drain the residual oil maybe every other time?
Yes, but when changing the oil you should always change the oil filter or your just putting fresh oil into and through a dirty oil filter so it may just cost more in the long run but yes to answer your question.
man..started to think about this 130....and this Oil filter thing stood out. Easy Change. Then find out it's like 40+ bucks. what the heck. and They say just do the filter?? when most the oil is left in the machine? what the heck?
Bad design and if you want your engine to last,, I would suggest changing it out.
i sure do wish you had the lx 277 , the layout is a lot different and im a noob
Would running a tube with a small drill pump down the dipstick tube be able to get most of the oil out?
Very good video thank you👍👍👍
Hi Shawn, I’m glad it was helpful. Make sure you get the John Deere kit in my description below. It will be easier to install and you should not need the extra tool. Thanks for the kind comment. Please click on the like button, subscribe and tell your friends to help my channel grow. It would be greatly appreciated. Thank you for watching:)
Does this void the warranty? I’m going to be buying an S170 soon and I want to do this.
That question can only be answered by a John Deere dealership. Let me know and we can post it here for other people to see.
I thought the John deere quick change filter was expensive until I replaced my SUV wiper blades! The filter is a bargain
I have the John Deere E-120 will that replacement Briggs filter work for my model ? Thanks
If you have a Briggs and Stratton twin cylinder engine, yes the Briggs filter will work.
A Stens oil filter is # 120-485
I liked your video a lot. One question, what amount of oil for an oil change model E130?
If it is a twin Briggs and Stratton. It should be between 1.85 and 2.25 quarts. Refer to the engines owners manual for the correct amount.
great Vid - thanks
Glad you liked it, Thank you for watching :)
I'm looking at getting a new riding mower. After watching this would it be a better buy If I got a cub cadet instead?
You can purchase the John Deere without the quick change oil filter. My opinion is the John Deere are still made by John Deere and if you can afford a X300 series? They will last a long time. Cub Cadet was purchased from MTD many years ago and the quality has suffered since. Cub Cadet tractors produced today are getting better but I still prefer John Deere. That is just my opinion.
The kit I purchased the nipple you use a large Allen 3/8” drive to install the nipple
Yes, I changed the kit to make it easier. I need to do the video over. The next machine I get in that I will change out, I will show the kit from John Deere.
will this also work on the 2021 s120 that has this quick change. thank you
If the engine is the same as the one on the video, then yes it will work. The engine that is I. The video is a Briggs and Stratton twin cylinder engine.
@@JohnsonsSmallEngines i bought mine today its the v twin 22 hp i haven't even started it yet i will get the numbers off of it where do i go to look up the parts. thank you for your response.
Go to parts catalog.Deere.com/jdrc/
I’m not sure if that will work on a hand held device. If you email me through my website I can put a link in there to your email. Or try John Deere Parts Catalog on a search engine
@@JohnsonsSmallEngines thank you sorry it took so long went through web sight and found what i need thanks
Awesome video! I going to do my new S 170 soon. Is everything the same for the S 170?
Yes it the same but make sure you get the John Deere kit. You will not need the special tool in the video. I made sure the John Deere part numbers are in the description. I’m going to make another video using the John Deere parts but need a tractor that needs the kit first! Thanks for the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
What is the PART number for the installer ? thanks
Look in the description and just purchase the John Deere kit. You will not need the pipe nipple installer. I need to re do the video but to busy. The John Deere kit will come with everything you need except the Allen wrench to install the oil filter nipple. The part number for the John Deere kit is MIU13767B
@@JohnsonsSmallEngines Perfect thank you for the fast reply - GREAT video.
Great video on how to do this change.I have the new S110 because of the Quick Change system. Is it possible to install the cruise control on the S110? Thanks.
Thanks for watching! I would contact your local John Deere dealer to help you with that question.
You seriously only want to change part of the oil and leave most of the old, dirty oil in the engine? Next to not changing oil at all, that is the easiest way to destroy an engine that I ever heard of.
I always do this on customers equipment, I never put those stupid quick change filters on...we sell them but I won't put it on.....planned obsolescence????
Great video! I just bought a s170 John Deere. I plan on doing this to mine. Do you have a list of filters for the different model engines?
Here is the link for the Briggs and Stratton oil filter used on this engine. If you have the Briggs twin engine this will be the correct oil filter.
amzn.to/3j6FNaM
@@JohnsonsSmallEngines the model number on my engine is 44u877. Same filter?
Yes, same filter. Thank you for supporting my channel!
I don't know what John Deere was thinking here, 50.00 dollars for a filter and you still have to drain the crankcase anyway.
For the nipple, could you install it on the oil filter first, then use that to thread the nipple to the engine? Once the red loctite is cured the nipple will stay in place when removing the filter.
I do it the way there are no issues. I would just worry that the loctite would get on the oil filter and you would have issues getting the oil filter off or it would take the fitting out with it.
Thank you 🙏
I’m glad it was helpful:)
I bought a new S120 tractor and a six year warranty. I bet if I do this it voids the warranty
Where can I buy that at
Hi Lee, I made a newer version video with all the "John Deere parts". Watch this video,ruclips.net/video/IzgsX3IHbEg/видео.html. for a better version and all parts needed are in the description. The kit is. John Deere conversion kit. amzn.to/3WlnPTj
I have an S120 does the kit linked to Amazon work on my model? Thanks
I would call John Deere and confirm the John Deere part number for (the kit) your model. Once you have the John Deere number, you will be able to make that determination from there.
Would it be all the same parts for the new S series motors? I have an s120.
Yes, as long as your engine is a twin Briggs and Stratton like the one in this video.
@@JohnsonsSmallEngines Thank you!!
Same setup for e- 150 ?
If the engine is the same, yes. Use this video, ruclips.net/video/IzgsX3IHbEg/видео.html. I made a second video so you can use the John Deere parts to make it even easier to change over.
Its sucks when a good company FORCES a money scheme on ya. And it only removes 1/3 of the dirty oil.
How often do you change the oil with the new conversion?
My personal opinion on oil changes vary on conditions where the machine is being used. To be safe I would suggest between 40 and 75 hours depending on use. Always change the oil filter when changing the oil.
Every start of season is my rule of thumb
Will this work on an E120 model?
Yes. If the engine is a Briggs and Stratton Twin.
where are you located i want a a change over
I'm am no where near you. Just order the John Deere kit online. It is better and easier to install than what I have in this video. I will make another video when I have a John Deere in that will need to change out but until I get that just use the John Deere kit. amzn.to/3EnaZfI
I had the conversion kit ordered before they delivered my tractor what was john deere thinking u dont replace all the oil and u pay 40 bucks I use a jd oil filter and Castrol edge full synthetic and cheaper then the quick oil change lol
That stupid JD oil change situation is what made me completely overlook JD mowers. Absolutely idiotic.
My E120 is due for the 50hr oil change and I'm not impressed to see the "quick change" system leaving so much dirty oil in there.
I agree! Very poor design.
Easy crap filter comes with 8oz of oil, cost $55 wonder how many are ending up in landfills.
The computer repair fiasco, now a $40 filter? Definitely staying away from Deere.
That easy change system is a rip off, its 50 bucks. When two quarts of oil and a filter is like 20 bucks and changes the whole amount of oil. It's almost like they want it to fail. They also put 10w30 in those transaxles which gives it a life of about 200-300 hours. If you change the oil to mobil 1 15w50 from day 1 it will last double that possibly more. Nothing more important than oil in these things.
My wife and I recently bought a John Deere X354 that doesn't have that stupid quick oil filter. I almost didn't buy a John Deere of any kind after seeing that stupid easy oil change filter on a S120. We almost lost interest in John Deere after that. I hope we didn't make a mistake with the X354. I can only hope that the JD marketing idiots did not affect the X series. It's hard to fix stupid.
The John Deere x300 series are a nice step above the 100 series tractor. Your machine is a good one! Thank you for watching:)
Any X series are super solid, and with good maintenance should be able to get to 1000 hours with minimal issues
Today it’s 60 dollars
Ouch!! , check out my newest video in the link in description. It uses all of John Deere parts and is easier to install.
There’s a better kit to do this with, so you don’t need those special tools
Yes, I made another video. It’s in the description below.
It can't be good for the engine to have that old oil in it for so long. John Deere is just banking on people's laziness and ignorance to have something like this on their equipment.
I think JD saw that most people ignore the recommended oil change intervals, so they came up with the "quick and easy" filter change so even lazy people would at least change a portion of the oil and the oversized filter, would help clean the oil. After seeing how much oil is left, I'm going to go back to the traditional oil change method with synthetic oil. I wonder if we can get an oversized oil filter for it, like the easy change filter. (that size). The easy change JD filter is super fast and easy to change, but I'm not going to risk a large investment with old oil. My engine only has 40 hrs on it and the oil is still clean (after 2 quick change filters), so I hope I caught it in time, to save the engine from unnecessary wear.
I think this is one of JD's dumbest ideas. Super expensive. Not changing the oil. A huge waste of unnecessary parts that are not recyclable. Why? just why?
Yeah remove it and throw it away their junk
Thats a crappy setup..