You could try swapping entire doors. Maybe it will plug and play. You will probably have to swap the fuse block behind the steering wheel also. I'm not saying it will 100% work, but if you have the parts, it's worth a shot.
@@AlexM17. Go to this link and input your vin. It will tell you all your rpo codes and what they are. Mine is AU3 keyless entry www.free-vin-decoder.com
have a question for you bro, just took the door wiring harness out of a 2012 suburban and i’m wanting to put it in my 08 WT. suburban had electric windows, locks, and folding mirrors which i grabbed. what else would i need to take to be able to swap it all over ?
Unfortunately when I tried to use a new harness it didn't work for me but I'm not absolutely sure it won't work at all. If not anything else you are probably gonna need that small fuse block on the side of the dash drivers side. On mine there was no circuit for the power windows so you for sure will need that. Another thing is I'm not sure your stock harness has the wiring going over to the passenger side to make everything work so you might have to figure that part out as well. Would be nice if everything was plug and play but unfortunately in my case it definitely was not.
@@T_B_C_L man i’ve been researching this shit for the last 2 hours bro i can’t find shit on my situation 😂 probably just gonna find a 08 LT/LS dash to swap my WT out with and use the door harness that comes out of that truck lol, these trucks came with too many options and it is a pain in the ass to find information on them. thank you for the help tho bro
@@Lowzaracing yea man trust me, I combed the internet desert when I was trying to get this done and found basically nothing on it. This is the reason I made some videos. I wish I could have made better videos but I posted what I had. Good luck on figuring it all out. If all else fails you can just hard wire everything like I did 😁
@@T_B_C_L yea knowing i can hardwire them is the the only thing keeping me from going insane 😂 guess we’ll see how everything goes tho thanks for the help !
@@T_B_C_L thanks. Dealerships and people selling on eBay are saying 07-08 only. I've helped install them on friends trucks that were 2011 and 2013 but never payed attention to what year the mirrors came off of. I thought maybe it was the plugs on the extra wires not being the same as mine are DL8's
@@danielk0106 I could be wrong but these are the mirrors I bought and they say 07-13 www.1aauto.com/2007-13-chevrolet-gmc-driver-and-passenger-side-2-piece-mirror-set-trq-mra09295/i/1amrp01160
@@T_B_C_L I appreciate the help. I was thinking the only thing would possibly the plug on the harness for the turn signal/power fold maybe different? That's what I was thinking because my 2011 and 2013 had DL8's and I put DL3's on them and I think one set came off of a 2008. I think it's just the sellers on eBay covering their asses. Totally understand that. I'm also waiting on a wrecking yard to pull some door panels and send photos as it looks like an LT that came with the Power folding switch on the drivers side.
@@danielk0106 I'm not sure if you are trying to wire up a single cab but just know the single cab switch that has the fold function is completely different then the switch I installed in my videos. That window switch is more like the crew cab switch. I know because I have one sitting in my shop. You would need to figure out the wiring for that one.
Happy holidays, Iv seen part 1 & part 2 several times, I would like some guidance on how to just hot wire the windows? I have a 2012 Sierra single cab -work truck model, I have window regulators, door harness, & door panels from a 2012 yukon, Im not sure if I’m not catching the part on how to do so. I have the power mirriors and folding wire diagram figured out. Any help would be appreciated I currently have everything staged
Unfortunately I wasn't getting my comment notifications so I'm answering a bunch of comments late. I will help In any way that I can. To start you actually only need a 12v constant and a 12v switched along with a ground but technically you could just ground using a self tapping screw on the door. You will need to run 2 wires from the drivers door switch to the passenger door switch in order to control the passenger window from the drivers switch. OK so I will try to explain what goes to what. On the DRIVERS door window switch plug you only need to connect these wires. large red with white stripe to 12v constant, yellow wire to 12v switched, black to ground, brown with white stripe needs to be connected to the door lock switch plug that has same color wire. Tan and light blue wire need to be extended all the way to the passenger door and connected to the tan and light blue wire on the passenger window plug. OK now PASSENGER door you do basically same thing red with white strip to 12v constant, yellow to 12v switched, brown with white stripe to door lock same color, black to ground and of course the tan and light blue wire get connected to the wire you extended over from the drivers door like mentioned before. That's it that all you need to make it work. You can get your power sources from where ever but I just chose to connect them on the accessory block right next to the brake pedal. Just make sure that the source you chose is capable of at least 15amps. Try to reference the video at about 35min and I try to explain how I connected all the wires I just explained. At minute 41 I show where I tapped into to get my 12v constant and 12v switched. Hope this helps!
Thank you getting back to me brother, Iv been really busy and I haven’t gotten to doing the work again but I will soon and I’ll let you know. I’m pumped now to get it working as it should.
Hope you figured it out. All of a sudden a bunch of comments that I've never seen before just popped up. Some going back years ago. Sorry if I missed it man. Definitely was trying to ignore anything. RUclips and it's algorithms 🙄
Got a work truck as well roll down windows Tommy gate love that thing but god the manual windows are a pain! Everything else I can deal with but man the windows ugh
Why these truck are made with manual mirrors is mind boggling! I bet it costs more to make both manual and electric windows then to just bake all electric!
I hacked up both harnesses for my truck but I still have the fuse box. So your truck came with factory remote start and keyless entry but no power windows or mirrors?
@@barrymonroy7138 ah hell man I thought you had a work truck like mine 😂! If you already have power mirrors then yes I'm pretty sure you just need the mirrors and the switches. You may even need the dealership to flash the bcm as well unless you get used switches out of a truck that already had power folding mirrors. What year is your truck and is it a regular cab?
@@T_B_C_L yeah you should and I just wanted to ask you something about the truck bro mine is not electric windows and locks and its annoying I want do it electric but I dont know if I get everything from a thahoe panels and I'll the cables would it work or do I need to do something else to ?
@@antoniojuarez5247 I believe the tahoe door panels are different which will mean the wiring harness is also different. If the door panels are the exact same as your truck you can make it work but if not you will need to look elsewhere.
@@T_B_C_L ok I can I can get them from a truck that are the same and all the wires but how do I conect all that do you know some one that has done it before
Great video ! I have a 13 Silverado work truck also… kinda sucks ! Haha but what drop(size/brand) and tire set up do you have?
Truck is completely different now but that was a 5/7 McGaughys drop and tires were a 275/45r20 I believe.
Good job man thank for the heads up I really like ur truck it’s bad ass
Appreciate the positive feedback 🍻
Nice truck! I have the same truck but what drop and wheel set up do you have on it?🔥
That was a 5/7 McGaughys on stock GM 20 inch wheels but the truck don't look like that anymore.... Lol!
Looking to swap lt doors on 08 ext cab work truck. What wiring and wiring harnesses would i need to switch and run? I have entire parts lt truck.
You could try swapping entire doors. Maybe it will plug and play. You will probably have to swap the fuse block behind the steering wheel also. I'm not saying it will 100% work, but if you have the parts, it's worth a shot.
Did you have power door locks already or you hard wired them up can’t find anything on the net
My truck already had keyless entry from the factory.
@@T_B_C_L How do you check if you have keyless entry? My truck came with power locks but I haven't had any luck with key fobs.
@@AlexM17. Go to this link and input your vin. It will tell you all your rpo codes and what they are. Mine is AU3 keyless entry www.free-vin-decoder.com
@@T_B_C_L Thank you man
@@AlexM17. No problem 👍
have a question for you bro, just took the door wiring harness out of a 2012 suburban and i’m wanting to put it in my 08 WT. suburban had electric windows, locks, and folding mirrors which i grabbed. what else would i need to take to be able to swap it all over ?
Unfortunately when I tried to use a new harness it didn't work for me but I'm not absolutely sure it won't work at all. If not anything else you are probably gonna need that small fuse block on the side of the dash drivers side. On mine there was no circuit for the power windows so you for sure will need that. Another thing is I'm not sure your stock harness has the wiring going over to the passenger side to make everything work so you might have to figure that part out as well. Would be nice if everything was plug and play but unfortunately in my case it definitely was not.
@@T_B_C_L man i’ve been researching this shit for the last 2 hours bro i can’t find shit on my situation 😂 probably just gonna find a 08 LT/LS dash to swap my WT out with and use the door harness that comes out of that truck lol, these trucks came with too many options and it is a pain in the ass to find information on them. thank you for the help tho bro
@@Lowzaracing yea man trust me, I combed the internet desert when I was trying to get this done and found basically nothing on it. This is the reason I made some videos. I wish I could have made better videos but I posted what I had. Good luck on figuring it all out. If all else fails you can just hard wire everything like I did 😁
@@T_B_C_L yea knowing i can hardwire them is the the only thing keeping me from going insane 😂 guess we’ll see how everything goes tho thanks for the help !
@@Lowzaracing you got it??
What year model DL3 power folding mirrors will fit my 2007.5 NNBS Silverado? I was told only 2007-2008
@@danielk0106 07-13 should bolt up no problem
@@T_B_C_L thanks. Dealerships and people selling on eBay are saying 07-08 only. I've helped install them on friends trucks that were 2011 and 2013 but never payed attention to what year the mirrors came off of. I thought maybe it was the plugs on the extra wires not being the same as mine are DL8's
@@danielk0106 I could be wrong but these are the mirrors I bought and they say 07-13 www.1aauto.com/2007-13-chevrolet-gmc-driver-and-passenger-side-2-piece-mirror-set-trq-mra09295/i/1amrp01160
@@T_B_C_L I appreciate the help. I was thinking the only thing would possibly the plug on the harness for the turn signal/power fold maybe different?
That's what I was thinking because my 2011 and 2013 had DL8's and I put DL3's on them and I think one set came off of a 2008. I think it's just the sellers on eBay covering their asses. Totally understand that.
I'm also waiting on a wrecking yard to pull some door panels and send photos as it looks like an LT that came with the Power folding switch on the drivers side.
@@danielk0106 I'm not sure if you are trying to wire up a single cab but just know the single cab switch that has the fold function is completely different then the switch I installed in my videos. That window switch is more like the crew cab switch. I know because I have one sitting in my shop. You would need to figure out the wiring for that one.
Happy holidays, Iv seen part 1 & part 2 several times, I would like some guidance on how to just hot wire the windows? I have a 2012 Sierra single cab -work truck model, I have window regulators, door harness, & door panels from a 2012 yukon, Im not sure if I’m not catching the part on how to do so. I have the power mirriors and folding wire diagram figured out. Any help would be appreciated I currently have everything staged
Unfortunately I wasn't getting my comment notifications so I'm answering a bunch of comments late. I will help In any way that I can. To start you actually only need a 12v constant and a 12v switched along with a ground but technically you could just ground using a self tapping screw on the door. You will need to run 2 wires from the drivers door switch to the passenger door switch in order to control the passenger window from the drivers switch. OK so I will try to explain what goes to what. On the DRIVERS door window switch plug you only need to connect these wires. large red with white stripe to 12v constant, yellow wire to 12v switched, black to ground, brown with white stripe needs to be connected to the door lock switch plug that has same color wire. Tan and light blue wire need to be extended all the way to the passenger door and connected to the tan and light blue wire on the passenger window plug. OK now PASSENGER door you do basically same thing red with white strip to 12v constant, yellow to 12v switched, brown with white stripe to door lock same color, black to ground and of course the tan and light blue wire get connected to the wire you extended over from the drivers door like mentioned before. That's it that all you need to make it work. You can get your power sources from where ever but I just chose to connect them on the accessory block right next to the brake pedal. Just make sure that the source you chose is capable of at least 15amps. Try to reference the video at about 35min and I try to explain how I connected all the wires I just explained. At minute 41 I show where I tapped into to get my 12v constant and 12v switched. Hope this helps!
Thank you getting back to me brother, Iv been really busy and I haven’t gotten to doing the work again but I will soon and I’ll let you know. I’m pumped now to get it working as it should.
@@sergiosalinas3925 heck yea man anytime. If you need more help or have any questions just reply here. I believe I have my notifications fixed 🍻
Hey Sergio is it possible to make the 2008 GMC electric by getting everything from a yukon or thahoe?I mean all the harnes and the panels
Thank you for all the info, I now have fully functional power windows 👍🏼😎
I think you should program the fuse block and also you need a door module
I'm not sure what you mean. All my windows and mirrors work.
Can you send me a link of the driver side and passenger harness and fuse box please
Hope you figured it out. All of a sudden a bunch of comments that I've never seen before just popped up. Some going back years ago. Sorry if I missed it man. Definitely was trying to ignore anything. RUclips and it's algorithms 🙄
Got a work truck as well roll down windows Tommy gate love that thing but god the manual windows are a pain! Everything else I can deal with but man the windows ugh
Why these truck are made with manual mirrors is mind boggling! I bet it costs more to make both manual and electric windows then to just bake all electric!
Or do you still have the harness and fuse box???
I hacked up both harnesses for my truck but I still have the fuse box. So your truck came with factory remote start and keyless entry but no power windows or mirrors?
@@T_B_C_L Factor... My truck came. Power windows power miorror( heated) power locks w/ keyless entry and remote start...
@@barrymonroy7138 ah hell man I thought you had a work truck like mine 😂! If you already have power mirrors then yes I'm pretty sure you just need the mirrors and the switches. You may even need the dealership to flash the bcm as well unless you get used switches out of a truck that already had power folding mirrors. What year is your truck and is it a regular cab?
@@T_B_C_L 2007 Chevy Silverado Standard cab LT.
@@T_B_C_L I found the master switches for the driver side
You have iG?
I do but I don't really post on there. I should probably make one specifically for the channel though.
@@T_B_C_L yeah you should and I just wanted to ask you something about the truck bro mine is not electric windows and locks and its annoying I want do it electric but I dont know if I get everything from a thahoe panels and I'll the cables would it work or do I need to do something else to ?
@@antoniojuarez5247 I believe the tahoe door panels are different which will mean the wiring harness is also different. If the door panels are the exact same as your truck you can make it work but if not you will need to look elsewhere.
@@T_B_C_L ok I can I can get them from a truck that are the same and all the wires but how do I conect all that do you know some one that has done it before
@@antoniojuarez5247 just hook everything up and see if it works. If it don't then you will need to hardwire everything like I did.