When I have a 1s 8 p lithium ion battery and I got to check power level it stays 0s lion and all numbers are zero and low Batt voltage but battery should be abut 50 percent
Una domanda nel menù c'è quel programma di battery Smart,potresti darmi un po' di spiegazioni, visto che ho due batterie lipo da 3,8 v cella singola con 1800 mah(smart) con l' ingresso cavetto USB.Le uso per il mio drone Battle sharks della visuo xs809s, grazie
Da quello che ho capito, batterie smart sarebbero le batterie con il BMS integrato...ne ho una, ma utilizzo normalmente la funzione lipo charge (non balance, al quanto se ne occupa il BMS della batteria)
Unfortunately, i did search too for this but there doesn't seem to be a way to calibrate it. Luckily, mine came in the box well calibrated with a 0.01V+- difference. So i didn't need to calibrate it.
@@blowingchannel4424 thank u for reply bro Just started doing rebuild battery packs and had a few blank batterys that I did not not the battery capacity of....so could not mix and use
@@nothingbutthetruth7900 Yes. Definitely. I have this for 2 years now and it never gave me a single problem and always worked fine. So i definitely recommend this. You can watch part 2 of this vid where i explain charging / dischargging and other functions
I keep getting the message “connection break” does anyone know what that means? Cause it won’t do anything after that so I can’t charge my battery. Keeps me that message every time
Do you have a B6 charger or B6 V2 charger? I guess that message is from B6 only and it means battery not connected...if i remember well because i had a B6 version charger
ruclips.net/video/jQ6hhP7dVvM/видео.htmlsi=E4ZgY5nfJ4WukK86 parla della calibrazione dell' imax B6 AC ,dai un occhiata se la procedura a metà video può essere usata anche per il caricabatterie HTRC
Nice review, thanks! I wish to watch part 2
Part 2 coming
Thanks for the tutorial, very useful. One question: if I want to calibrate the charger, what is the procedure? Thanks again
Thank you so much! Unfortunately, as i already searched for, there doesn't seem to be an option to calibrate this charger.
When I have a 1s 8 p lithium ion battery and I got to check power level it stays 0s lion and all numbers are zero and low Batt voltage but battery should be abut 50 percent
Ok, gentilissimo
Una domanda nel menù c'è quel programma di battery Smart,potresti darmi un po' di spiegazioni, visto che ho due batterie lipo da 3,8 v cella singola con 1800 mah(smart) con l' ingresso cavetto USB.Le uso per il mio drone Battle sharks della visuo xs809s, grazie
Io non ho mai lavorato con batterie smart ne usato quella funzione, se vuoi posso farti vedere com'è ma spiegare come funziona è un po difficile
Da quello che ho capito, batterie smart sarebbero le batterie con il BMS integrato...ne ho una, ma utilizzo normalmente la funzione lipo charge (non balance, al quanto se ne occupa il BMS della batteria)
Do you know how to calibrate this one? Dec and start doesnt work, cant find anything on the web
Unfortunately, i did search too for this but there doesn't seem to be a way to calibrate it. Luckily, mine came in the box well calibrated with a 0.01V+- difference. So i didn't need to calibrate it.
@@blowingchannel4424 - 0.02 here, do not that bad. But still rather have +0.02 🫣
Can this battery capacity test
Yes. That's what i mostly use it for
@@blowingchannel4424 thank u for reply bro
Just started doing rebuild battery packs and had a few blank batterys that I did not not the battery capacity of....so could not mix and use
@@blowingchannel4424 would u say this is a good buy then ?
@@nothingbutthetruth7900 Yes. Definitely. I have this for 2 years now and it never gave me a single problem and always worked fine. So i definitely recommend this. You can watch part 2 of this vid where i explain charging / dischargging and other functions
@@blowingchannel4424 fantastic I'll subscribe as was very easy to understand brother and I'll older one now 👍🏻
I keep getting the message “connection break” does anyone know what that means? Cause it won’t do anything after that so I can’t charge my battery. Keeps me that message every time
Do you have a B6 charger or B6 V2 charger? I guess that message is from B6 only and it means battery not connected...if i remember well because i had a B6 version charger
@@blowingchannel4424 got it, thanks for your reply!!
@@p0kemon4 No problem! I'm here if you need to ask something!
ruclips.net/video/jQ6hhP7dVvM/видео.htmlsi=E4ZgY5nfJ4WukK86 parla della calibrazione dell' imax B6 AC ,dai un occhiata se la procedura a metà video può essere usata anche per il caricabatterie HTRC
Ho appena provato, ecco il video...nessun risultato
ruclips.net/video/ooUBzIAM9kk/видео.htmlsi=wp5oAtU9dZAUKV5G