Making a japanese dining table . coffee table
HTML-код
- Опубликовано: 25 ноя 2018
- 古民家の柱を再利用して、ちゃぶ台を製作しました。
材料は欅です。
家具用の材料ではないので、脚は折りたためない仕様です。
使わない時は立てかける事があるそうなので、脚に負荷がかかってもいたまないように木組みです。
I reused the pillar of the old private house and produced a dining table.
The materials are zelkovas.
Because it is not materials for furniture, the leg is the specifications that are not foldable.
When not in use, it is a tree composing type because I seem to have possibilities to lean it not to ache even if load suffers from a leg. - Хобби
Instagram → instagram.com/hokutosekine/
There’s an honesty to what you make and how you make it that is very nice to see. It’s a very ‘real’ look at your practice. Thanks so much, and beautiful work!
Your skills kept amplifying all the way through. Brilliant.
編集面白くて楽しませてもらってます😂
That is one of the most beautiful peices. Thanks for sharing.
Simplemente maravilloso!!
Saludos.
Beautifully done, thanks for showing us your wonderful craftsmanship.
What a masterpiece and superb carpentry skills. I love Japanese style furniture. Sugoi
Beautiful work and craftsmanship
ブラボー、素晴らしい仕事。
An item of great beauty through simplicity, but also through Knowledge and skill. Thank you for sharing this special moment. Greetings from France.
Finally some good content!! Your kanna shiage was superb.
The craftsmanship is on another level ... so relaxing to watch, but hard to execute
amazing quality! incredible pursuit and excellence! Bravo!
My new favorite RUclips channel! ✌🏻
Beautiful. Your joinery work is amazing. Domino for the top buttons :). Nice!
I can't even explain. Such a great and emotional work. Thanks for that, hokuto. I'm starting in woodworking and this is what i think i want to do.
Wow, the level of skill and confidence here is truly the work of a master. Some very dangerous situations but with absolute concentration and knowledge of the tools and how the wood will react it can be done safely, and what’s more, efficiently. Your quest for perfection and attention to detail are inspiring me. I can’t wait to get to work tomorrow.
Excellent work 👍! Thanks for sharing the journey.. I really enjoyed it!!
The paucity of views and comments here really surprises me. This is an experienced, accomplished furniture maker showing his step by step build of a beautiful piece of furniture. Even a little dry humor in the presentation, as when he is cutting off the table top stock.
Speaking of which, all those years indoors acclimating and moisture cycling, and yet the stock is still as tense as it could be, closing kerfs, trapping sawblades! Hokuto San (please excuse me if this is not his proper name) is correct that it is not so suitable for furniture making.
Outstanding work my friend sorry I haven’t seen you on RUclips before, you now have another follower for sure
Un lavoro eccezionale. Bravura manuale unita a estetica. Passione, arte.
Amazing job, just the smooth touch of art in wood can be this one: congratulations
Very nice table, however your freehand technique with the inverted router table had me cringing, with that technique I'm surprised you still have all your fingers.
Beautiful! 10/10
Молодец , очень хорошо !
absolutely beautiful! You are definitely a wood artist.
Bravo! Applause!
Beautiful
Beautiful work my friend but that overhead router with no guard YIKES!
I love your old equipment i would trade all money for your workshop
Высший пилотаж, браво мастер
I was wondering how the table top would be joined to the frame and legs. I was not expecting the screws at the end!
Simply AMZING!
I just have the simple idea to use my coffee table to dine on it too.
WOW, JUST BEAUTIFUL‼️👍👍. Vinny 🇺🇸
Very nice work
😏
Spectacular.
Amazing, a master of shop machinery able to achieve superb results with only 1% hand finishing.
I loved the construction process, but I would like to know what type of finish you used, lacquer, wax, since it gives it a very natural look. Thank you
grate job!
What an artist.
Работа с душой и от души. Супер
Is Zelkova plentiful in Japan?
The table is really really gorgeous.
Wow. AMAZING... that this guy has all of his fingers!
Somuch love and beauty. Much gratitude.
made in japan all wonderfull.
01:38 Funny moment .. Thank you sir .. Amazing video .
喜欢看日本的工艺制作,喜欢他们的做事态度,一丝不苟,最大限度的做好每个细节。
Bravissimo hokuco
You do nice work but the way you use the planer (without a guard) and drill press for milling long pieces made me nervous. I worked as a cabinetmaker for 14 years.
Jointed wood breathe as a whole so it expand and contract all together that prevent from cracking thus It’ll last long
belajar bgm workshop tetap bersih , pkerjaan sgt detail , rapih , apik , luarr biasaaa , hasil sangat presisi dan the best
Buen Trabajo!!! Porque quemó los tornillos???? Saludos desde Cancún México.
các bạn nhât tài giỏi quá ...beautyfull
Elegant
Beautiful table and a lovely grain pattern. Why is zelkova not for furniture?
Zelkova used this time, the grain is twisted.
Therefore, it is unsuitable for furniture.
@@hokuto59-japanesewoodworki25 It is a beautiful wood, though, when finished properly - or so it looks, judging by the table you built.
Your craft is ridiculous. You are so meticulous and to a maker that means everything. Keep doing your thing my friend!
Just to be clear, I am quite sure that MuffsJs means that the skill displayed is so great that it is almost bafflingly, ridiculously high, in idiom.
この卓袱台はもったいないからひっくり返せない。いい仕事してますねー。
Is your finishing Kanna?
Except for the dark knot on the edge, I would buy this. Do you have a website?
Is it a spesific name for dough rolling table or chabudai is a general name for all?
Home beautiful is the wood ?
Anyone else heart stop beating at 4:43 ? No guard!!
13:47 that's called satifaction
how could I make this in my room?
try for that long, finally fix the lower part with a screw! Unbelievable!!!
Can you tell me...why you burn that screw...
Harika olmuş Türkiye den teşekkürler
Why did you burn those screws?
Viva👌
I wish I knew what was that wood.
¿No se podrían unir las patas al tablero sin tornillos?
经常看欧美的木工制作,真是直摇头,都是大量胶水和钉子,还是榫卯结构的,看着舒服
someone know what´s the name and /or model of the 18:10 min machine?
what's the wood kind?
Wonderful skills and awesome wood, but man. I am suffering every time I see you using that router without a guard. Every four finger carpenter was overly confident of his skill until they lost its finger/s. Accidents can happen to the best of us and fingers are only 10 and do not growth back. Use some time of guard, your fingers worth more than any time you save.
What type of finish are you using?
I worked in a shop with an overhead router. The thing was from some ww2 factory in Germany. Massive powerful and quite frankly scary as hell.
You just sayd what i was gonna write...Safety first¡¡
very true man
14:48 can you explain why in Japanese woodworking a block plane is typically used here? Is it for further shaping? It would seem that after the lathe a sander would create a more uniform surface. Just trying to learn. Thanks.
probably because of the desired finish he wants on the legs when sanding you create a more mat finish because you are esencially just scrapping the wood fibers to a very fine grit meanwhile when you use a block plane / kanna you are cutting each individual wood fiber wich leaves a shinier or more glossy finish and it seems to me that in japanese wood working sand paper is often not used in the finishing stages off furniture builds might just be preference or something like that
Subbed
The result was good but I'm a little disappointed to see he use glue and screws.
I couldn't watch this due to those 15 ads every 5 minutes!!
wonderful work but i dont like the screws id like that you use only wood
It makes no sense, for that particular purpose. He could have used wooden dowels, but it wouldn't have added any aesthetic value to the table.
A really nice way to open the video, with a little humor! And I am highly impressed with the way he combines top western equipment with Japanese tools and techniques. His skill, art and craftsmanship with the hand tools is impeccable; really something to inspire. Has my subscription immediately.
I agree with @UC4cma7ImAu5QNwhlpuLDS9A, this man is too skilled and experienced for his own health. Is Hokuto his family name? Until I learn differently I will use Hokuto San. At first I was more worried about Hokuto San's finger placement at the jointer, then later I saw what Julio referred to at the router. I hope that the laws of probability don't catch up to him some day.
👍🔥💪
完美!! 钉子为什么要烧一下?!
Hokuto 😊
What does the wetting the wood down have to do with the planing at 15:04 ? I know wetting wood causes the grain to open/rise but how does this help in planing?
In Western carpentry, you usually wet the wood to raise the grain before finishing - by sanding with fine grit sand paper after the grain was raised, you make the surface smoother. My assumption is that it's the same here, only, instead of sanding, planing is used.
When planing small round piece, you often get reverse grain on both direction which cant be avoided, wetting the wood helps prevent tear out.
Супер!
🥇🏆👏👏👏👍🏻Russia 🇷🇺
brilliant job. but why did you put the screws in the stove
Annealing: en.wikipedia.org/wiki/Annealing_(metallurgy)
@@wwhizz I suspect in this particular case it was to burn off the shiny chrome coating.
Здравствуйте!
Какова стоимость этого стола?
That router is very interesting, how do you control your cuts?
There is a guide pin underneath, in axial alignment with the overhead bit.
@@leehaelters6182 Couple of those cuts weren't on the pin tho.
larrybud, whoa, hairy!
Went back to look again. I was wrong, no template underneath, of course. Running against a fence. Pretty hairy when he was doing those shoulders, not advised at all.
Well, looked again, and he wasn’t actually trimming the shoulders with the router, just cleaning the bottom, really, really close to the sawn shoulder. I think that elsewhere in these comments I might have mentioned how some other things like finger placement over the jointer, loose long sleeves were giving me the willies, though. Such a skilled craftsman and designer, I feel a little disloyal, almost, pointing these out.
"Joints of No Return".
what's the measurements?
Dear mr. Do you have use sand paper after use kanna plane on table top? Thank you so much.
I was also wondering that, I trad once that a planed surface has less torn grain and is typically smoother than a sanded surface.
26:03, what is that product?
circular saw!
For heaven's sake use a push stick on the jointer and table saw. You have exceptional talent - time to add brains and not lose fingers.
قياسات الطاولة اليابانية
スムーズに行ってないところを隠さないのが可愛い