I'm inserted in buying this glue but would like to know that if I remove polarizer whole white line is gone. how do I start line. or does the glue comes with instructions
Hello. Great video on finally showing the solution on the static. But is the touch still working after the repair? And one last question. Is this paste the same thermal paste used in CPU cooling before applying the fan on top of it? Thanks in advance.
Hey, I have a problem: all goes well for removing polarizer and placing a new and making a condactive line as explained in the video but I still static problem. 've tried severals displays but always the same result :( I have all the tools, but does not work !!! can someone help me! thanks
Nice job, well done! Would this work after removing the clear film then apply the static paste along the top ? Just a thought that way u could have a clean perfect quality repair free of damage to the film, I've tried cutting along the lcd just under the gold line with a razor then peeled the film off leaving the gold line fully intact. Was perfect for about an hour then the static problem started to appear. So no luck :(
That's undoubtedly a smart solution guys .well done !!! however i have some confusion as i have also been unsuccessful in sorting this static or ghost lines issue out . By this video do you mean that if we have remove the thin plastic film over the polarised film (due to being badly damaged) then we need not to put a new polarised film and we can simply add this glue and the static problem will go ??? In this vide when you are putting the glue with the injection , the surface was so clean as if there is a new polarised film there , was it there or you just had cleaned the surface after removing the thin plastic film ? I once had changed the polarised film however this static issue came later on so I am a bit confused …:( .
my screen is just comming up with blue and red lines. I tried plugging the backlight flex it worked fine but then when the other is plugged it goes black with boxes. any ideas what this could be?
I noticed that you applied OCA tape on the LCD. Once you put OCA tape, the static will go away, so your testing after apply conductive material isn't real test.
you guys are flat bad asses. no jank no shortcuts fully legit.
Hi!
Could you guys help me
i have to replace the polarizer or just add this conductive tape on the lcd with removed clear film?
With this issue except the lcd image you have problem with the touch too?
Hi. i never put that and for now i dont have any issue.. and sometimes i remove that line.. cant understand why..
I'm inserted in buying this glue but would like to know that if I remove polarizer whole white line is gone. how do I start line. or does the glue comes with instructions
Hello. Great video on finally showing the solution on the static. But is the touch still working after the repair? And one last question. Is this paste the same thermal paste used in CPU cooling before applying the fan on top of it? Thanks in advance.
Hello :)
How can I tell if I should use clear or matte polarizer film for the iphone 5?
Hey,
I have a problem: all goes well for removing polarizer and placing a new and making a condactive line as explained in the video but I still static problem. 've tried severals displays but always the same result :( I have all the tools, but does not work !!!
can someone help me!
thanks
Nice job, well done!
Would this work after removing the clear film then apply the static paste along the top ? Just a thought that way u could have a clean perfect quality repair free of damage to the film, I've tried cutting along the lcd just under the gold line with a razor then peeled the film off leaving the gold line fully intact. Was perfect for about an hour then the static problem started to appear. So no luck :(
Not sure, because your doing something other then what were showing.
Hello,Thanks for your video. Does static cause the dead spots on an lcd? thanks for your help.
+asdf no
That's undoubtedly a smart solution guys .well done !!!
however i have some confusion as i have also been unsuccessful in sorting this static or ghost lines issue out .
By this video do you mean that if we have remove the thin plastic film over the polarised film (due to being badly damaged) then we need not to put a new polarised film and we can simply add this glue and the static problem will go ???
In this vide when you are putting the glue with the injection , the surface was so clean as if there is a new polarised film there , was it there or you just had cleaned the surface after removing the thin plastic film ?
I once had changed the polarised film however this static issue came later on so I am a bit confused …:( .
my screen is just comming up with blue and red lines. I tried plugging the backlight flex it worked fine but then when the other is plugged it goes black with boxes. any ideas what this could be?
+Rakesh Kay Probably, the conductive material was applied on the flex on top of the LCD by mistake and short it. I saw same cases before.
That's really cool
Why can't I find this product on your site any more?
do you guys have this "conductive paste" for sale?
Next week going up.
Hi, i visited your site but i did not find the siring. Where can i buy it?
www.lcdglue.com/product-p/silverpaste.htm
iPhone 6 problem of touch after polarizer replace
+MrLoveman90
The problem is in the polarizer,buy better quality,happen same to me.
+MrLoveman90 Fake polarizes is the cause
what are you using to test screens?
Screen Tester - usually 200 or so USD.
Nice work but you can remove try remove filter form LCD install front glass using OCA method and check result:)
I was killing my self over this issue for one year \!!!!!! thank you guys
I noticed that you applied OCA tape on the LCD. Once you put OCA tape, the static will go away, so your testing after apply conductive material isn't real test.
+Stephan Shin what is OCA tape?
+PhoneFixPro.com OCA (Optically Clear Adhesive) but never mind, we found the solution. This method never worked.
+Stephan Shin may i know your solution? Does the iphone 6 have this static issue too?
what machine was he using under the lcd and what does it do exactly?
how to get rid of the blue and red line on the left right ?
That's the tester normal output. On a phone it doesn't display that.
I still having fustration removing the S4 LCD from its Mould