That's amazing man! Nice work, it looks great. Loved the editing and the music, especially the intro. Can't wait to see the breakdown video, it's very out of my comfort zone but i'd love to take a shot at this mod in some fashion.
If there were any reductions it would be due to new thermal paste not the additional fans. EvilNat 4.90 has fan speed controls built in for specific temp ranges and works very well.
Not sure what you are trying to accomplish adding two 80mm fans and only drilling a few holes for the air ingress. the fan for the processors is only going to take in what it can take in and it is ducted to exhaust to the rear. Neat but it looks cheap.
NO ONE cut out the top of the case above the centrifugal fan! Just DON'T. They are specifically DESIGNED to use channels and proper air pressure to cool the device they are attached to. Cutting holes in the top of your case introduces more contaminants AND completely disrupts the correct air pressure and channels throughout the case a heatsink. HORRIBLE idea. It looks cool, I'll give you that. If you want to do your PS3 a favor, cut out larger channels in the FRONT and REAR (rear isn't needed as much) and replace factory TIM with something of higher quality and you're good to go. This is pointless and a waste of time.
I got a ps3 slim on the side of the road I think having a hole in the top is better than it being in a landfill. You gotta realize that some people have very little care for these because they’re so cheap compared to what they were years ago. I’ve got 2 and I’ve had one since I was a kid. I’m not chopping that up ever, the other one I put overclocked firmware and custom fan profiles on just to experiment with, my total investment is $0 so I don’t really care if it pops.
@@speck8419 that's perfectly fair. My PS3 2500 was brand new just a few months ago so I just tend to care a little more. No reason to blow them up on purpose or damage them irreparably if you can help it.
Hey I wanted to give you some rerally good feedback. The dual fans actually work, I just got done doing the tests today this morning and I can prove to you that the dual fans in fact do help. I will create a new video this week to show you the results. In short, it helps the main fan to not work so much and keep temps cooled the way I want them to stay with webman mod enabled. I was astonished as how much percentage of fan speed both of the fans help reduce on the main fan itself. They went down by 20% and peaked at 25% at one point. Without the fans the main fan stayed at 80% and with the help of the dual fans it was reduced to 60% and even stayed at 55% for some time. Thats not with AC either, and my room was running pretty hot due to my dual pc setup. So I will now test it to see how cool it will stay or quiet, reducing the temps in my room. So I am will make sure to prove that this is NOT a waste of time.
Looks like he used a set of fans that use an RGB fan controller. He left the fan controller outside of the case, and powered it using a SATA power to AC adapter.
Very cool love the design. From what show/game is the mech? (Evangelion/ Zone of enders/ something Gundam). I would like to do a custom PS3 one day (Phat or Slim). Though I have a silly idea in mind, Imagine a PS3 slim with two PC fans (Cooler master hyper 212 style) poking out of the top case. Almost like a supercharger 😅😆, but the mounting arrangement and my skills will be the issue.
hi, why you make only 4 holes fpr the fan ? why not a big one on the dimension of the fan that mean an 80mm ? (i dont speak about the screws holes to attach the fan to the console) thank you
as cool as it looks, the ps3 slim doesn't really need this mod, it is already pretty quiet and doesnt overheat, of course that's only if you actually take care of your ps3 and don't leave it in an unventilated place and let it gather dust, also changing the thermal paste to something half decent also goes a long way
@@Fogolol yes, if u use evilnat they have a custom update that oc’s your ps3 it works awesome for me and its def worth it just make sure u use webman mod for fan control
this breakcore music is so fucking fire holy shit
Beautiful work bro this console is my favorite for life ordered one to replay all good memories
This video gonna blow up views real soon.
Love the dope music!!
It's perfect , perfect 💕
Tbh verry nice looking Ps3 Slim Cech2000
I love the Gundam design
That's amazing man! Nice work, it looks great. Loved the editing and the music, especially the intro.
Can't wait to see the breakdown video, it's very out of my comfort zone but i'd love to take a shot at this mod in some fashion.
You are very gifted!
EPIC!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Wow great design
Thank you so much
That’s an awesome setup.
great job but It would be better if we could see the temperature values with multiman later.
If there were any reductions it would be due to new thermal paste not the additional fans. EvilNat 4.90 has fan speed controls built in for specific temp ranges and works very well.
Not sure what you are trying to accomplish adding two 80mm fans and only drilling a few holes for the air ingress. the fan for the processors is only going to take in what it can take in and it is ducted to exhaust to the rear. Neat but it looks cheap.
this is just amazing.
NO ONE cut out the top of the case above the centrifugal fan! Just DON'T. They are specifically DESIGNED to use channels and proper air pressure to cool the device they are attached to. Cutting holes in the top of your case introduces more contaminants AND completely disrupts the correct air pressure and channels throughout the case a heatsink. HORRIBLE idea. It looks cool, I'll give you that. If you want to do your PS3 a favor, cut out larger channels in the FRONT and REAR (rear isn't needed as much) and replace factory TIM with something of higher quality and you're good to go. This is pointless and a waste of time.
xd my rsx is at 50 degrees with the holes whatever
so I don't see why it's bad
I got a ps3 slim on the side of the road I think having a hole in the top is better than it being in a landfill.
You gotta realize that some people have very little care for these because they’re so cheap compared to what they were years ago. I’ve got 2 and I’ve had one since I was a kid. I’m not chopping that up ever, the other one I put overclocked firmware and custom fan profiles on just to experiment with, my total investment is $0 so I don’t really care if it pops.
@@speck8419 that's perfectly fair. My PS3 2500 was brand new just a few months ago so I just tend to care a little more. No reason to blow them up on purpose or damage them irreparably if you can help it.
Hey I wanted to give you some rerally good feedback. The dual fans actually work, I just got done doing the tests today this morning and I can prove to you that the dual fans in fact do help. I will create a new video this week to show you the results. In short, it helps the main fan to not work so much and keep temps cooled the way I want them to stay with webman mod enabled. I was astonished as how much percentage of fan speed both of the fans help reduce on the main fan itself. They went down by 20% and peaked at 25% at one point. Without the fans the main fan stayed at 80% and with the help of the dual fans it was reduced to 60% and even stayed at 55% for some time. Thats not with AC either, and my room was running pretty hot due to my dual pc setup. So I will now test it to see how cool it will stay or quiet, reducing the temps in my room. So I am will make sure to prove that this is NOT a waste of time.
where do you connect the additional fans power to?
holy moly 😍
like for using a himitsu as music for the video very good taste 🗿🍷!!!! The work with the console was amazing!!!!!
You have to sand the case before you paint it
DOPE! Did you sand the painted blue part down near the power and eject button?
dope I didn't do any type of sanding.
Coolio work, how did you power the 2 additional fans?
Looks like he used a set of fans that use an RGB fan controller. He left the fan controller outside of the case, and powered it using a SATA power to AC adapter.
That's a psuedo Hatsune miku ps3 hehehe looks cool!
Sick mod! Wish the vid was 10 mins long, it was over too quick.
play it at .25 speed.
I would totally send in mind to so you can delid it change the thermal paste paint it and put 2 fans just likes yours I pay good money
Amazing nice work indeed but which country are ?
Hi I am in the US.
Badass
Very cool love the design. From what show/game is the mech? (Evangelion/ Zone of enders/ something Gundam).
I would like to do a custom PS3 one day (Phat or Slim). Though I have a silly idea in mind, Imagine a PS3 slim with two PC fans (Cooler master hyper 212 style) poking out of the top case. Almost like a supercharger 😅😆, but the mounting arrangement and my skills will be the issue.
Lindo trabalho parabéns Vídeo inspirador 👏👏👏👍
hi, why you make only 4 holes fpr the fan ? why not a big one on the dimension of the fan that mean an 80mm ? (i dont speak about the screws holes to attach the fan to the console) thank you
What's the price? 😎
if your ps3 is cfw or gen, you can show the tempeture in a short video
love Voltus 5!
De dónde sale la alimentación de los fan RGB? Desde la PCB o desde una fuente externa?
as cool as it looks, the ps3 slim doesn't really need this mod, it is already pretty quiet and doesnt overheat, of course that's only if you actually take care of your ps3 and don't leave it in an unventilated place and let it gather dust, also changing the thermal paste to something half decent also goes a long way
works for overclocking
@@m3e642 Wait you can overclock a ps3? WELL COUNT ME IN!
@@Fogolol yes, if u use evilnat they have a custom update that oc’s your ps3 it works awesome for me and its def worth it just make sure u use webman mod for fan control
@@m3e642 oh but that requires a full CFW right? i wasnt able to do that on mine so i'm using HEN
@@Fogolol yes, it does require full cfw
where you get that fan grill from on top of the case?
Can you say what components did you use?
4:28 are those two fans sucking the hot air out of blowing cool air in?
I have the same question
los colores muy bien....... pero los huecos que les hizo el play pares que los hizo con un destornillador
Can you made it for ps3 fat too?
Does anyone know where I can get the grill for the fan? (I don't speak English, use a translator)
Now try overclock it
Oh wait nevermind... Just found the video