Great video. Thanks for it. I have one question. Is it possible to use a dado blade set with this saw? Does it have enough space for a set of dado blades? Thanks in advance.
The T-slot track opening is 16.42mm wide at the throat. The throat lugs are 3mm thick. The internal track width is 21.1mm so far too sloppy for any standard 3/4 inch track runner accessory even if you did mill the throat away so it was a trough rather than a T-slot. (Note the bottom of the T-slot is also profiled with ledges on the base of the T slot so depth at throat is 0.9mm greater than depth under lugs). The runner under the OEM angle gauge is a T shape with 20.0mm wide bottom section 6.94mm thick and top section 16.04mm wide and mm edges. One solution is a sled with hardwood runner. I use a waxed oak strip about 16.2mm wide and 7.0mm deep. No significant dimensional change evident in runner strip within the climatic variation evident in my garage in 5-30 deg C temperature range and relative humidity range 54-78% through summer into winter. An option I have yet to develop is using a 20mm wide metal strip 5mm thick running in the running in the T-slot with a metal "packer" strip say 15mm wide 3mm thick screwed on to the runner fill the gap caused by the 1.4 mm wide throat of the T-slot. Little tolerance for rough handling by accidental bending of Al strip so hardwood may be quickest solution.
좋은아이디어 감사합니다 솜씨가 정말 정말 좋으시네요.... 1500X600 사이즈로 만들어 보고 싶은데 다리가 흔들리거나 하진 않을까요? 예를 들어 사람이 올라간다던지... 휴대용 작업대 겸 우마사다리 대용으로 쓰고 싶습니다 칫수 링크 오류 나던데 재업 해주시면 감사하겠습니다
저도 보쉬 테이블쏘를 쓰고 있는데 톱날을 오늘 처음 교체 하려고 너트를 풀려고 하는데 안풀리네요 영상보니깐 회전반대방향으로 잠그시던데 너트를 풀때 톱날 회전방향으로 풀어야 되나요? 센타에 물어보니 회전반대 방향으로 돌려서 풀라고 해서요...알려주시면 감사하겠습니다~~영상 항상 잘보고 있습니다^^
Great video, I have a Dewalt DW745. has an equivalent price and the great advantage of the gear fence, it is not necessary to unlock the fence for further measurements. This is sensational and cuts are always accurate. The durability of the DW745 is also excellent, years of trouble-free use.
I'd love to have one, loving its rack and pinion gliding fence system. Sadly the DW745 was not available in Thailand. The GTS10J is however very sturdy, very portable yet offering a highly precise cut. Not regret buying this Bosch job site model despite a little bit play on its fence system.
What will be the cost of it ? It's made in India?
High production value. Joy to watch!
This machine can be purchased from food, plz tell me I am from India, can I get this machine much, please tell sir.
Is this machine made in taiwan? Or china
It is made in China.
Made in china. Is this the original bosch? Im here in korea and im planning to buy it online at coupang
Yes original bosch
@@leemaker6801 thank you for the information. I ordered now. It cost 505, 000won.
this machine can cut the steel ??
In what country this machine made
Thank you for watching.
Have a nice day
Great video. Thanks for it. I have one question. Is it possible to use a dado blade set with this saw? Does it have enough space for a set of dado blades? Thanks in advance.
Thank you for watching.
Have a nice day
How much can be found in Bangladesh
Bosch is a wonderful brand Company &
Very very very good ☺️👍👍👍🎉🎉🎉
Can u tell me the price of this table saw in pakistan
How much does one set cost?
How much is the price?
From where can I get it
How much this cost sir please reply
Thank you for watching and have a look other uploads. Lots of fun!
The same German bosch?? Where can i buy in Kenya?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
Wonder why Bosch designed a non-standard slot in their table saw deck casting? Solutions
The T-slot track opening is 16.42mm wide at the throat. The throat lugs are 3mm thick. The internal track width is 21.1mm so far too sloppy for any standard 3/4 inch track runner accessory even if you did mill the throat away so it was a trough rather than a T-slot. (Note the bottom of the T-slot is also profiled with ledges on the base of the T slot so depth at throat is 0.9mm greater than depth under lugs). The runner under the OEM angle gauge is a T shape with 20.0mm wide bottom section 6.94mm thick and top section 16.04mm wide and mm edges. One solution is a sled with hardwood runner. I use a waxed oak strip about 16.2mm wide and 7.0mm deep. No significant dimensional change evident in runner strip within the climatic variation evident in my garage in 5-30 deg C temperature range and relative humidity range 54-78% through summer into winter. An option I have yet to develop is using a 20mm wide metal strip 5mm thick running in the running in the T-slot with a metal "packer" strip say 15mm wide 3mm thick screwed on to the runner fill the gap caused by the 1.4 mm wide throat of the T-slot. Little tolerance for rough handling by accidental bending of Al strip so hardwood may be quickest solution.
Thank you for watching.
Have a nice day
Bosch company woodwork toll number one quality world👌👌👌👌👌🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
Thank you for watching.
Have a nice day
공구의 발전은 어디가 끝인지 모르게
계속적 업그레이드 되어가는군요
신 개발상품을 찾아 제공하여 많은 도움과
정보를 주신 당신께 엄지척 👍
시청해주셔서 감사합니다.
즐거운 하루 되세요 ^^
Price in pakistan .and where from we buy it.
How much tish products?
좋은아이디어 감사합니다
솜씨가 정말 정말 좋으시네요....
1500X600 사이즈로 만들어 보고 싶은데 다리가 흔들리거나 하진 않을까요?
예를 들어 사람이 올라간다던지...
휴대용 작업대 겸 우마사다리 대용으로 쓰고 싶습니다
칫수 링크 오류 나던데 재업 해주시면 감사하겠습니다
Hi.. What is the cost of this machine? Can u tell me on Indian rupee?
Were can purchased this unit
Thank you for watching.
Have a nice day
nice divaice, i want to by it, and where get, price
Cost and availability in India??
Guardntee, warrenty, services facilities??
Availability of India made if there is?
What is the price
does it accept dado stack
What is the name of the wood used at the end
Thank you for watching.
Have a nice day
How RS gets 10s prise
Thank you for watching and have a look other uploads. Lots of fun!
What is the price in India
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 550. This is the amount purchased
in Korea. Thank you. Have a nice day
How much of cost
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 550. This is the amount purchased
in Korea. Thank you. Have a nice day
Is it available in india
What is a rate of machine
I don't know what you mean.
Thank you for watching.
Have a nice day
What is the cost of this machine? Is available in India?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
How much is prize of this
How much does this product cost
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
How much bosch table saw
PkR
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
Sir product German made an korian made
Máy cắt bàn này ở VN có ko bạn
Price please I want to buy it
Give price and place to purchase
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
Hi can you tell me the price of machine and it can be available in nepal
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
Hi how much is price
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
Please let me know the cost and delivery time
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 550. This is the amount purchased
in Korea. Thank you. Have a nice day
How much you pay
What is this cost I want micheen
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 550. This is the amount purchased
in Korea. Thank you. Have a nice day
How many US dollars does it take to send to Bangladesh?
Sorry.
I don't know because I live in Korea
How we buy it ?....i m from pakistan, province KPK .
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
Please tell me about selling point in PAKISTAN....or send me with price... I receive it in PAKISTAN and pay the price it...please reply me thanks
what is its price?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 550. This is the amount purchased
in Korea. Thank you. Have a nice day
Very useful and good looking machine
Thank you for watching.
Have a nice day
How much this one
How much praice
Great review! You highlighted it's great and not so great features. Thanks 👍 Just got to save up for one now😎
Thank you for watching.
Have a nice day
이 제품을 고민하던 분들에겐 소중한 영상이 되겠네요 이격과 단차가 있는 부분도 체크해주시고^^ 이유없이 댓글로 욕하는 쓰레기는 신경쓰지 마십시오 좋은영상 잘봤습니다!!
한동안 기분이 우울했는데
님 댓글보니 힘이 나네요 ㅎㅎ
좋은글 감사합니다 ^^
즐거운 휴일보내세요 ~
How much price in Pakistan
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 550. This is the amount purchased
in Korea. Thank you. Have a nice day
Could you know about price in Pakistan
Sorry.
I don't know because I live in Korea
Plz can u share the price in indian rupees
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
What Is the cost of the product
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
How much cost
Linked below.
Thank you for watching.
Have a nice day
Baglai ki paoya jabe
India mein kis rate mein padegi? Price India Mein Kya Hogi pahuncha ke
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
how many price for this machen?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 550. This is the amount purchased
in Korea. Thank you. Have a nice day
How much it cost?where can I order?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
WHAT the price of this Machine
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
Where can I buy this type of table saw?
I have the same saw , can you please do an adjustment video
Thank you for watching and have a look other uploads. Lots of fun!
Yar ye mujhe b chaheye aor iss ka rat kya ha
how much for the table saw...?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
I like this mashine i want to price this machine in india thanks
What is price
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
Can you export in Nepal
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 550. This is the amount purchased
in Korea. Thank you. Have a nice day
보쉬테이블소 최신형 가격과 기능이 궁굼합니다.
Can u tell me the price of this table
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
저도 보쉬 테이블쏘를 쓰고 있는데 톱날을 오늘 처음 교체 하려고 너트를 풀려고 하는데 안풀리네요
영상보니깐 회전반대방향으로 잠그시던데 너트를 풀때 톱날 회전방향으로 풀어야 되나요?
센타에 물어보니 회전반대 방향으로 돌려서 풀라고 해서요...알려주시면 감사하겠습니다~~영상 항상 잘보고 있습니다^^
시청해주셔서 감사합니다.
회전방향으로 풀어야 풀립니다.
회전반대방향으론 잠기는것이구요
너트 입장에서 보면 회전반대방향으로 잠겨줘야 톱날이 회전할때 더 단단히 잠기겠죠
참고 하시기바랍니다.
전동회전하는 제품들 모두 그렇죠.
선풍기 날개 잠금도 그래요.
회전으로 나사 풀리면 안 되니까.
How much is it please?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
Bhai es ki pariez kia hai pleez
Pleez
Thank you for watching.
Have a nice day
초보도 조립할수 있을까요?
넘 갖고싶은데~~
네 가능합니다.
조립은 그리 어럽지않습니다.
영상보면서 천천히 따라해보시기 바랍니다.
감사합니다.
Керемет👍👍👍 бағасы қанша тұрады .🇰🇿🇰🇿🇰🇿
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
Ai masin ta ki dam acha /ar shorum kothay kachc kachi
How about melamine board
Thank you for watching and have a look other uploads. Lots of fun!
가격은 얼마나 할까요?? 2020년기준
현재 가격은 인터넷에 검색 해보시면 나올겁니다.
시청해주셔서 감사합니다.
where is the best place to buy tools in korea?
You can search in the Google site of Korea.
Thank you.
오늘 구매했습니다 ~ 개봉전인데 설레이네요 ~ 구독도 하고 갑니다 :)
구독 감사합니다.
안전목공 하세요 ^^
가격은 얼마에 구매하셨나요
가격은.얼마예요?
02W
212085370326
How can i buy this machine? How much Indian Rupees for this machine?
BOSCH TABLESAW
Model No. GTS10J
The amount I purchased to use is $ 390.
This is the amount purchased in Korea.
In Indian rupees
Around 28k in Indian rupees
Di indonesia sudah ada ngak ya ????
This is Korea.
Wood is from Indonesia.
Harganya berapaan
How much this sir
좋은 영상 잘 보았습니다. 지금도 10j냐 10xc냐 결정을 못하고 있네요. 어짜피 확장테이블은 자작할 예정인데 그러면 그냥 10j로 가도 비용 절약도 되고 좋을 것 같은데 기왕 사는거 신형으로 가야 되나 싶기도 하고...하...
네 그러시죠
저도 고민많이 하다가 아직 초보인지라
좀더 숙달되면 업글하려고 일단 브랜드 있는것 중에 제일싼걸로 질렸습니다. ㅎㅎ
관심 가져 주셔서 감사합니다 ^^
Bosch GTS ... Best in his class now. 💪🏽👏🏼👏🏼👏🏼
Thank you for watching.
Have a nice day
جناب یہ کٹر مشین پاکستان میں کہاں پہ کتنے کی ملے گی
How many rupes
I am from Nagaland India. Can you please tell me the price and how to buy this table saw. I like it👍👍
BOSCH TABLESAW Model No. GTS10J The amount I purchased to use is $ 390. This is the amount purchased in Korea. Thank you. Have a nice day
gts10j 에 쓸수 있는 간단한 테이블이나 영상 있으신지 궁금합니다. 이제 막 설치해야 하는데 받침대를 만들어야 하는데 정보를 찾아봐도 없더라구요 ㅜㅜ
시청해주셔서 감사합니다.
말씀하신데로 아직 받침대는 못만들었습니다 ㅠㅠ
How i wel bay dhes mashin
I wan to buy this machine please tell me the address
Linked below.
Thank you for watching.
Have a nice day
Its great , my i know the size of cutter and price please ,
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
6204874322
How much does it cost?
It is not for sale here.
The amount I purchased to use is $ 390.
This is the amount purchased in Korea.
It's about $400 on Amazon.com
Nabil Abdel Rahman thank you for your reply
How can prize
where is avialabel and how much?
BOSCH TABLESAW
Model No. GTS10J
The amount I purchased to use is $ 390.
This is the amount purchased in Korea.
Thank you.
Have a nice day
Amazon pr bhi available h sir
Hay. I from Bangladesh .how mush many this machine? Place give me answer. Thank you
BOSCH TABLESAW
Model No. GTS10J
The amount I purchased to use is $ 390.
This is the amount purchased in Korea.
Thank you.
Have a nice day
잘 보았습니다. 감사합니다. 근데 인서트 단차의 조절은 안되나요? 주문해 놓았는데 디월트와 쏘스탑은 하단 쪽의 나사로 높이의 미세조정이 되는데, 이 제품은 그 기능이 없나요? 없으면 취소해야 하는데... ㅠ.ㅠ
죄송합니다.
자작테이블쏘 만들어 사용하면서 처분해버려서 잘모르겠네요 ㅠㅠ
도움이 되지못해 죄송합니다.
Best video👍👍👍
Thank you for watching.
Have a nice day
cuales son las medidas de esta maquina ,sin la extension?
가격이얼마인가요
كم سعر هذا المنتج وكيف استطيع ان اشتريه
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
Great video, I have a Dewalt DW745. has an equivalent price and the great advantage of the gear fence, it is not necessary to unlock the fence for further measurements. This is sensational and cuts are always accurate. The durability of the DW745 is also excellent, years of trouble-free use.
The DW745 is a good table saw.
I also like DW745.
Thank you for leaving a comment.
Have a nice day.
I'd love to have one, loving its rack and pinion gliding fence system. Sadly the DW745 was not available in Thailand. The GTS10J is however very sturdy, very portable yet offering a highly precise cut. Not regret buying this Bosch job site model despite a little bit play on its fence system.
DW745 has a smaller blade, which is unfortunate
Pp and where can we get
Ei machine e Kato inch wide wood section possible?
Can cut up to 45 cm.
구매방법이없어요