2017 Subaru STI Brake Rotor and Pad Install - DBA T3000 + Hawk 5.0
HTML-код
- Опубликовано: 26 ноя 2020
- Product Links!
Instagram: @chrisvuono
Obsessed Garage: bit.ly/2LtofVq
Car Wash Stuff:
Jescar Powerlock: amzn.to/2Pwg2Tx
Collinite 845: amzn.to/2ooGN18
Adams Wheel Cleaner: amzn.to/2nMxjwq
Adams Rubber and Tire Cleaner: amzn.to/2ozJhdp
Adams Car Wash Soap: amzn.to/2pkzqIi
Adams Window Cleaner: amzn.to/2MLwlZE
Adams Interior Cleaner: amzn.to/2MieCtZ
Adams VRT: amzn.to/3PJ9ZaH
Adams Tire Applicator: amzn.to/2piasJz
Koch Chemie GSF: amzn.to/3vAyi1r
P&S Beadmaker: amzn.to/2VHLFuJ
P&S Interior Cleaner: amzn.to/2WLpgOH
P&S Brake Buster (wheel cleaner): amzn.to/3mlAqDV
Sonax Alcantara Cleaner: amzn.to/2VDrkaT
EZ Detail Brush: amzn.to/2Bedq4t
Tuff Shine Brush: amzn.to/2Mh3VYz
Lug Nut/Brake Brush: amzn.to/2MLx0u6
Adams Buckets: amzn.to/35C42Wo
MTM M407 PW Gun: amzn.to/35CXZkv
MTM PF22 Foam Canon: amzn.to/3JegyyV
Clear Spray Bottles: amzn.to/3d1y34L
Maxshine M21 Polisher: amzn.to/3BnV0Pb
Polishing Pads: amzn.to/2Y4d2kj
Dramm Hose Valve: amzn.to/2VbqnGO
Hose Quick Disconnects: amzn.to/3hQFnn8
Gtechniq CSl and Exo: amzn.to/2QdfCkp
Applicators pads: amzn.to/3bPJoHX
Applicator: amzn.to/3bXhr0L
Car Stuff:
Bosch icon 26a Wiper: amzn.to/3bGn2pR
Bosch icon 16a Wiper: amzn.to/2OSuuEf
Perrin Reverse Lockout: amzn.to/2wNuqiZ
Perrin Radiator Shroud: amzn.to/2TkLC75
Perrin Boost Control Cover: amzn.to/2T27vcz
Perrin Belt Cover: amzn.to/3adXVsX
Perrin Strut Bar: amzn.to/2Vun5PB
Perrin Battery Tie Down: amzn.to/32ulc7h
Perrin Brake Master Cylinder Reservoir Cover: amzn.to/2I09HLd
Kartboy Short Shifter: amzn.to/3biabPc
Kicker speakers: amzn.to/2ys26UI
Kicker tweeters: amzn.to/2WQ6WEu
Kicker subwoofer: amzn.to/2A2KGOI
Idoing headunit: s.click.aliexpress.com/e/_d7q...
Carlinkit CarPlay (wireless carplay): s.click.aliexpress.com/e/_dY1...
Turbosmart Kompact bpv: ebay.us/13Dys1
F1 Fog Light: amzn.to/3hewSC8
2015-2017 Front lip: ebay.to/2Vk2BYO
2018-2020 Front lip: ebay.to/37mHeeZ
Side Skirts: ebay.to/3qktHwY
Rear Spats: ebay.to/3odfCQh
Carbon creations diffuser: ebay.us/xWXwYS
Carbon spats: ebay.us/VKyo0O
Carbon Fiber Front Lip: ebay.us/Mkbayl
Carbon Fiber Side Skirts: ebay.us/xXp6s2
Uniden R7: amzn.to/325E9yg
Uniden DFR7 Radar: amzn.to/2UDCz3a
Mirror Mount and Mirror Tap: amzn.to/2UFT9iQ
Garage Stuff:
Husky Work Bench: amzn.to/2PwxJSp
Cabinets (black): amzn.to/3cfGfir
What I use to dry my car: amzn.to/2uzSVj0
LED Lighting: amzn.to/2Te9HfK
Pressure Washer: amzn.to/346sdOe
Edifier R1850DB Speakers: amzn.to/3cOD9RI
Polk PSW10 Sub: amzn.to/2XfiXDT
Wera Screwdriver: amzn.to/2YFw5mT
LED Hood Light: amzn.to/3z40afZ
Camera Gear:
Sony ZV1: amzn.to/3Mz2B0w
Deity Mic: amzn.to/3CrT1ri
Cage: amzn.to/35EPSso
Wide Angle Lens: amzn.to/3CtKKn4 
Авто/Мото
I love how you love your car. Not many people would think about cleaning as you change out the rotors. 👍🏼
Great video!! and again, love the “how-to” series. Just like to add two things that was taught to me by seasoned mechanics. 1) You can use lug nuts to hold the rotors in place when you reinstall the caliper, that will make it easier. 2) Some, myself included, apply anti-seize to the caliper bolts. If anti-seize is used, the torque value needs to be reduced as it will act as a lubricant. Literature suggest a reduction of 25% and sometimes more depending on the size of the hardware. I don’t think you used any but just want to share this with your subscribers. Thank you.
Did my brakes last summer and I gotta say Brembo brakes are quick and easy!!!!!! LOVE IT!!
Only did pads, my next brake job I’ll be doing pads and rotors.
Great video man!👍🏻
Glad you mentioned the risk of the threads stripping out. I just replaced rotors and pads on my car with 100K kilometers and has been subjected to Canadian winters and salt. The two caliper bolts (steel) pulled out the aluminum threads from the caliper. I was able to drill them out and install helicoils but let me tell you that was a major PITA. Thankfully avoided having to replace the caliper. For the remaining three calipers I heated them up with a propane torch until they were just hot enough that it was uncomfortable to hold them but not super hot. That allowed the bolts to come out without issue. Be sure to use copper antiseize on them which is good for high temp and dissimilar metals.
Here's a tip. Don't know if anyone else mentioned it because I'm too lazy to read through the comments. On the 18+ STI Brembo calipers there's also a pin in the middle that's held by a M8 flanged bolt w/ a 13mm head on the back side. That bolt is the correct thread to use on those threaded holes to remove the rotor. You just have to pull the pin from the other wheel so you'll have 2 bolts to use. Thanks for the helpful video!
The bolt used to hold the brake line to the strut can be used as well 👍🏻
@@Scoobyfreak86 Didn't know that. Thanks fellow Subi!
So you just need a 8mm bolt is what you're saying?
This video is really helpful, I’m going to be installing this same rotors and new brake pads on my 17 STi as well today
Great video! Did the exact same swap a couple weeks back. Just keep in mind that these pads actually have a bit more clearance when they sit inside the caliper. When reversing, you might hear a click, which is essentially extra room for the pads during heavy braking(expansion due to heat).
Thanks for the tip!
Great video! I need to do mine! This is extremely helpful for a non-mechanic:)
Thank you so much for this video and for your wisdom and knowledge! You saved me money and gave me the ability to do it myself.
Nice vid, good technique. Most brake pad manufacturers claim that the slot in the friction material is intended to allow gases (from high heat loads) to vent better and keep the rotor cooler.
This video is the reason I went with dba and hawk hps 5.0. Absolutely no squeak at all and a MAJOR improvement over the stock pads, even though mine is only a wrx not a sti. Since I drive on the highway all the time, some extra sudden stopping power wouldnt hurt.
Working on my install now. Dealership quoted ~$3800 USD for front and back rotors and pads with labor. Saving myself about $3200 with your help!
Just did the same job yesterday. You were not kidding with that front passenger caliper. PITA w/o a swivel head breaker bar.
Great video instructions, I used them yesterday to install brakes and pads on my 2016 STI.
Glad to have helped!
Thank you so much this video was super useful saved myself 150 thanks a lot
great video:) clean and no filler.
Yea def wanna take the cap off the reservoir, also you should lube those caliper bolts.
Thanks man , you should be sponsored, plan on buying this exact setup for 2017 sti.
Came in the mail today. Going on this weekend.
I find a box end wrench is the best way to break free the bolts holding on the calipers. Just tap-tap with a big hammer. A lot of small taps rather than big heavy pounding. If a box end wrench doesn't work, I try a socket on a long breaker bar. I have destroyed ratchet socket wrenches doing this so I don't use them unless I can break free the bolt with one hand.
Nice upgrade!
VERY informative video man you da damn MVP!!!!
I just did my fronts this passed Saturday and doing my rears tomorrow, forgot about the grease on the back of the shims 🤦♂️.
Bro you made that job look so smooth 👍🏼.. I need new rotors soon I'm in 75k my sti ..
Editing makes any job look easy haha
When taking the pins out of the front calipers, press down on the clip to relieve the tension on the pins...they'll slide out much easier that way.
Thanks so much for this video! The dealership is trying to tell me the pads are on national back order and that just to install a pair of pads and rotors in the front it would be $1300.00 and they can only be brembo. I knew it's a lie and I am saving almost a thousand dollars from what they were saying!
I’m going to keep commenting with questions lol. I’m so scared to strip those bolts. You say Wd-40 and let it sit? Then exactly try to barely twist it .. ? How hard was that? That’s what I’m most nervous for.
Also, I don’t need to do anything to my brake lines right away, they just move out of the way with the caliper to put the pads and rotors on, correct or what am I missing?
If you turn the wheel to the left on this side then iit is much easier to work on the back of the caliper
Just got my front set of DBA 4000, took both calipers out and the inebitable just happen to me, driver side bottom bolt broke, and I PB blast the hell out of it, now my best bet take it to my tuner and pay 200-250 to fix it
Hi, Just wondering what the pad friction area height is. in other words the length of the split on the new pad?
Hey man , so I attempted my fronts , pulled some threads out the calipers going to re tapp , But I might have another issue , The threads that take the bolt Frist ( the arm on the car ) should those have threads ? My bolt goes in without turning . Or does it just tighten down to the caliper , I can email a pic if I make no sense lol
great video !
I did the exact same rotor and pad replaced 2 years ago believe it or not.
I love the rotors, but have since change the pads due to excessive squeaking. I don’t care how well they work if they squeak like a race car on my way to the drive through Starbucks.
Did you properly bed the pads and rotors in? I’ve been riding on them for a few days now and they are as quiet as can be.
What the torque for the rear I’m doing my brakes right now lol you didn’t mention the torque for the rear
Hey man I absolutely love your car. You should be proud of it. I have a '20 STI but it's 100% stock except for some aesthetic upgrades. Also from NJ myself, Bergen County. Did you notice any handling changes when you installed the spacers? I'm thinking of going with RCE Yellow lowering springs and throwing some spacers on the OEM wheels but I've heard mixed things about running spacers.
Thank you! Spacers of this size will not have any effect on the cars handling. I’m not a fan of spacers normally, but something this small doesn’t bother me.
Great video, next time turn the passenger side wheel to the left to have better leverage and vise versus on the drivers side. Love all your videos brother.
Thanks for the tip haha but hopefully won’t have to do this job for a while. Thanks for the support.
Very interesting video so helpful.
What brake fluid to use? I would get airline tubing and put into a bottle with fluid to bleed brakes. This way no air into the system. I noticed nobody bleeds brakes in these.. I never had a newer car past 2003 until I got my 2020 STI.
ruclips.net/video/lKwvSCM98E4/видео.htmlsi=n7hzHroJbK-gxi_8
great video
So do you put the shims from the OEM pads on top of the new pad shims and then grease the oem pads? Trying to figure out what the order should be. Pad > New Pad Shim > OEM Shim > Grease?
Put grease on both the back of the pad and shim. They only fit one way. Caliper piston , OEM shim, pad, rotor. Anything the piston touches needs to be greased.
So helpful. Just wondering what type of breaks you using. Or can you give me a link where to get them ? Thank you!
Stock brembos with dba 3000 rotors and hawk 5.0 pads.
Where you from?
Upstate, rust climate makes a difference. Antisieze does make a difference. 04 WRX owner. Salt is my enemy, frame wise, engine wise a beautiful piece of art. Looking to upgrade my brakes to four pistons. “Looking and thinking” but this WRX is beautiful stock. Let’s see!’mm
Recently bought the same setup as you and they stop phenomenal, but...they tend to make a lot of noise. Specifically screeching. They are track pads so i kinda of expected it. Still really good brakes.
You need to bed then in more. They should squeak as they are not track pads. They are for the street.
Get install video. Just double checking. You also reinstalled the shim that came out with the factory pads
Correct. Swap the shims over from stock pads.
Would you say the Hawk pads are better than the OEM Brembos that the STI comes with? It's time for me to change my brake pads thinking about doing this setup.
Yes I was very happy with the hawk’s over the OEM.
Hey mate, I'm about to change out my rotors pads this weekend due to watching your video. All I'm worried about is stripping the caliper bolts... car has 43k miles on it.
How’d you luck out? Looking to do mine this Saturday, 45k… Pennsylvania daily driven until recently
Great job on the enhanced Brakes setup, are you able to resurface these rotors when the time comes?
Yes definitely could. Plenty of life left on the stock rotors.
Awesome!
I did the exact same setup but with DBA T2 Street Performance Pads but notice high pitch sound when firmly braking at about 30 to 20km to stopping point.
Do you put your oem shim on to the back of the dba shim that came with the pads?
Yes I used the OEM shims as well. Make sure the bed the pads and rotors in properly to rid the squeaking.
@@Scoobyfreak86 good thanks
@19:01 you say to not forget the stock shims as well, do you mean I should stack them with the shims on the new pads??
I am wondering the same thing. Just bought brembos for my WRX and they did not come with shims. The pads did however. Seems odd that you are supposed to stack them like that.
Spacer that you put it was due to the closed attachment to the alloy wheel or what was it used for other purpose?
Just for fitment. Not clearance related.
Can you do a video on how to install a new clutch? Or do you have one already? I need to install a new clutch as well for my 2017 wrx sti.
I’m on the stock clutch so no video on this. Definitely some solid videos out there that walk you through this process.
@@Scoobyfreak86 cool because it's acting up where while accelerating the rpms wind up, but the speed of the vehicle remains the same. Also, sometimes when I shift into 4th gear it says it's in 6th then flashes to 4th. I think it's the clutch wearing out.
great video. thank u. do u know what size of that two temp bolts for taking out rotor?
It’s an m8 bolt
@@Scoobyfreak86 so..8mm i think. Thank u sir. its really great video.
What is the torque spec on the rear caliper bolts? N how long did u let the rust penetrate settle for those caliper bolts for?
I used 80ftlbs. Only for a few minutes, but that will depend on rusted the bolts are. Mine were fairly clean so it didn’t take long to penetrate the bolt.
Does anyone know the size and thread pitch of the bolt he used to pop the rotors off the hub? Thanks in advance
You can use the screw that you remove from the rotor
do you remember the random bolt thread that you used to pop the rotor off with?
You can use the dust shield bolt
Scoobyfreak what rims are those? Really like the wY they look on the wrx
Enkei rs05rr
I've got a 2019 STI & the DBA T3 are my next setup.
Hey bro could use some advice, I just picked up 2017 STI , I knew that it would need a clutch so I brought it to a specialist and got the clutch done , I was going to have them do the pads bc there low but I was told the bolts that hold the caliper on was seized up and they said it would most likely snap , they said that job for them would take 3 days bc they send out the calipers to a machine shop to drill out the bolt. The clutch job was done in 5 hours and with a trans fluid change it ran me 1600$ total. That was fine with me but the brakes are bumming me out bc I always did my own . I’m now learning the subies used aluminum calipers with steel bolts. Any advice ? I haven’t tired to get the bolt out but if I snap it I’m screwed to get to work , thanks man love ur vids
Yes the calipers threads are a known issue. But shouldn’t take three days. Most people do a nutsert or retap it and you’re going to go.
@@Scoobyfreak86 ty bro ! Yeah I find that really odd , they told me it’s bc the send it to a diff shop and a laser does it lol. I might just slap on some pads and check another place.
Are these the same breaks as the wrx series white/performance pack? Trying to get pads for mine and I’m not getting much help. Looking for a good track day pad.
I can't 100% confirm, but by the looks of it, they seem to be very similar. I am willing to bet is it the same just by looking at the pictures.
@@Scoobyfreak86 thanks for the advice, I’m planning on going to nj Motorsports park on aug21 for my first HPDE. I’m just bringing a second set of oem pads. After I’ll experiment with a set of hawk pads.
As a fallow-up since my track day I would like to note to all brembo wrx/sti owners if you notice squealing from your breaks while the break pedal is NOT pressed and your pads are not worn it’s contamination on your pads from dirt/debris rust or in my case break rotor transfer from high load. Try sanding the pad surface with 180 grit sand paper. This was driving me nuts.
Me being the idiot i am struggled for half an hour with the pins because I forgot to take out the cotter pins. The two 19mm was actually pretty easy for me, only trouble was hard to get an angle on it.
If u turn the wheel, it would be easier to torque them up
Can you put antiseize on the caliper bolts
Yes you can, but you want to make sure they are snuggled down a bit more since the anti seize can interfere with the torque spec.
Hey great video, really helpful. But just wondering how do you know which way to loosen the caliper bolt for all side? And do you suggest on using a breaker bar or as your video, just rachets? I'm scared of stripping the bolt haha.
Left loosey for each side. I prefer Wrenches when loosening since you’ll be able to feel off the bolt breaks loose or not.
@@Scoobyfreak86 Thanks i kinda knew it was left but i cant seem to find any infos when it comes to this haha. Would u recommend a 6 point wrench? And its a 19mm bolt right. Sry tons of question. I'm a newb when it comes to this.
If I remember correctly, it’s 19 front snd 17 rear. A normal socket works just fine. Just put the wrench on and hit it with the side of your hand to break it loose.
@@Scoobyfreak86 Thank you! Lastly, what about bleeding the brake, is that necessary? I only plan to do the rotor and pads. I got 47k on my 2017 sti.
Not necessary, but recommended. Bleeding alone will help the pedal feel tremendously.
What size bolts did you use to pop the rotors off? I can’t get mine off. I’ve got a 2017 wax sti like you and need help on what size those bolts are so I can go buy some and pop the rotors off so i can finish doing my breaks. Is it 8 mm or what? Thanks
Use the brake line bracket bolt
@@Scoobyfreak86 The ones that you take off the calipers?
The brake line on the strut
@@Scoobyfreak86 Hey yeah, I got it! Thanks, I did what you did and it worked perfectly 🥰
@@Scoobyfreak86 I'm going to keep my car forever so I want to do some of the modifications when I'm more financially able too after I'm done with nursing anesthesia school then I'll really be able to take care of my sti. I like your garage set up quite a bit. The good thing is that im getting a home loan next year so as far as a proper garage set up is concerned what would you recommend? Would you get a lift, etc? Thanks again for everything. I've been able to get things done thanks to your tips. In fact it's totally worth joining your member page.
Omg the balls of impacting on those brake bolts on these brembos....😱😱😱😱😱
I love the impacts, but on the aluminum calipers... i just can't lol torque wrench at 80ft lbs call it a day personally
Haha I didn’t do a full impact on them as I turned down the ftlbs. Stopped as soon as they tightened.
how do you stick the shims to the new pads?
They get sandwiched between the caliper and brake pad.
HEY QUICK QUESTION. the shims, how do they go in?
They just go against the back of the pad as you slip it into the caliper.
@@Scoobyfreak86 hey, thanks! I'm doing this exact set up, on my own, next week.
Torque specs on two bolts for caliper ?
80ftlbs
what new rotors are those?
Dba
Will these exact rotors and pads work/fit a 21 sti?
You would need a different size
@@Scoobyfreak86 do you know where I can verify the sizes? People just say they got the 4000 series but don’t specify what SKU.
What are the 3mm spacers for?
Just for fitment of the wheels.
maaaan.. i wish my caliper bolts comes off that easy. i broke mine off and idk what to do lol
Sorry to hear that man. Looks like you’ll have to drill them out and helicoil it.
@@Scoobyfreak86 yeah.. i might just bring it to the shop and spend $100 and call it
Do you have a link by any chance?
Check the description
Please specify front rotor In title.
Updated sir.
Do they sqeak?
They don’t, but if they do you need to bed them in more.
Torx screw driver. not allen. just in case no one corrected you. and be very careful if you mistake using a torx screw driver when removing an allen screw, you're going to have a bad day. you'll screw up the tool and fastener.
Why not turn the tyre for more room to loosen/tighten those caliper mate 🤦🏻♂️
This was a thought that didn’t occur at the time of install but did eventually after I was finished.
You had so much life on your brakes but if u have the money why not