Does EVERYONE Have This Issue? Front Axle Seal Fix on Deere 4300. Need Help with YOUR Repair?
HTML-код
- Опубликовано: 9 мар 2024
- Replacing the front axle seals on a viewer's John Deere 4300. Watery oil, chipped teeth on gears, etc.
Would you like to have us repair your tractor?
Axle Vents:
OtisInnovation.com use code TTWT for 5% off
Heavy Hitch Products:
heavyhitch.com
Use Code TTWT for 5% Discount
Tractor Time with Tim Information:
Website: TractorTimewithTim.com
Favorite Products: amazon.com/shop/TractorTimeWit...
TTWT Merchandise: TractorTimeWithTim.com/shop
Facebook: / tractortimewithtim
John Deere Parts (Free Shipping with Code TTWT) www.greenpartstore.com/ttwt?A...
Use Code TTWT for 5% Discount at:
AgristoreUSA (hydraulic top links) www.agristoreusa.com/
Baumalight Stump Grinder www.shopgreendealer.com/ttwt?...
Deck Dolly deckdolly.com
Discount Hydraulics discounthydraulichose.com/ttwt
Heavy Hitch: heavyhitch.com/
Hood Guards www.5elevendesignz.com/
Hood Release Latch: www.3dfusionlabs.com/
Hydrosplus: hydrosplus.com/
Ken's Bolt on Hooks www.boltonhooks.com/
Lube Shuttle lube-shuttle.us/store
Precision Grapple agfolks.com/
PTO Link tractorptolink.com/
Summit Hydraulics summit-hydraulics.com/ttwt/?re...
Vented Dipstick www.otisinnovation.com/
10% Discount at:
ISOtunes Bluetooth Hearing Protection shop.isotunes.com/ttwt
Ariat Clothing: ariat.dkkdet.net/c/2762758/69...
Tim’s Favorites - ariat.dkkdet.net/c/2762758/10...
Limbsaw limbsaws.com
Macnaught www.macnaughtusa.com/
Tractor Basics: tractorbasics.com
Supporters of the Channel:
AHW John Deere Dealership www.ahwllc.com/
Artillian www.artillian.com/
Rhino Ag rhinoag.com
IAEquip: iaequip.com/
21st Century Equipment: www.21stcenturyequipment.com
Woodmaxx Chippers: bit.ly/woodmaxx
Ventrac: www.ventrac.com/ 
Хобби
Tim and Dave thoroughly loved watching you work on these projects!
I enjoyed watching this process, and vary happy sending my 3320 to my dealer for both done the money was well spent. I put the Otis vent on to hopefully prevent future issues. Thanks for a great lesson Dave, Tim & finance dept.
I just bought a 4300 with 5130 hours on it, non running needing some injection pump work. Pump is getting rebuilt at a local shop. Previous owner spent $6000 to have front axle seals done last year, will be adding one of those vented caps from otis, thanks for mentioning them!
$6000 for front axle seals!? Wow, we didn’t charge enough!
I have a JD 4200 I bought new in 98 or so. Fortunately I haven't had this issue. Great tractor, however, rather underpowered. Thanks for the informative video.
Installed an Otis Innovations vent kit today on my 1025R. Was actually surprised that there was a small amount of pressure in the axle when taking the dipstick out. Of course I used TTWT when ordering.
Can’t wait to hear what my local dealer says the next time I take my tractor in for my every other year maintenance. Yeah I know, I can do the maintenance myself but I don’t have the desire to mess with diesel oil anymore. Plus I have a couple of medical issues that just makes it uncomfortable to do all those things I used to like doing. My dealer will come and get my tractor and deliver it back to me the next day and they’re only about 8 miles from my house. They even pressure wash the tractor before returning it.
Great video, I used to be mechanic for 40 years and that felt good. The main thing I noticed you showed putting it back together, you did show taking it apart. That’s cheating. Good job guys
Love these videos that show how to perform repairs and maintenance that we don"t normally run into! Dave has a wealth of knowledge and skill to perform these tasks. Nice video Tim.
Thanks 👍
Great video. Will be nice to see the repairs coming to the shop. 👋👋👍🏻👍🏻
Orange Locktite for the win
I have done this job on my 4310 easy
Nice job.
Good Job on the front axle repair! I noticed a leak starting on my front axle final drive case last weekend, hopefully it will be an easy fix.
Vent your front axle. See if the leak stops.
@@TractorTimewithTim Thanks Tim for the tip! No pressure built up, but I found the issue. The bearing failed and some metal fragments from the bearing race must have damaged the seal. I flushed out the fine metal particles in the gear oil, replaced the bearing, oil seal and sleeve, hopefully it's good to go as I have a lot of soil to move!
Great video
So Wise , Thank You . We've rebuilt both sides of our 855 , several thousand dollars later . It works
Uhoh. We musta been too cheap on our labor!
Tin its not just deere I have done kubota too and the main hub seal on bigger kubota leak also venting and not changing oil also is a problem great videos
Proper tools make all the difference in the world. Red loctite when the part can handle the heat to remove it. It takes 500 degrees for Loctite brand red to loosen up. Also consider what is near that part. Blue with the activator will hold almost anything you need it to until service time. There are two blues, one is oil resistant.
I bought my LS tractor in Florida and it being flat which is about opposite of Missouri i noticed at an angle the oil was coming out the vent. I have yet to check the oil and probably it may be low. I think all the little tractors have the same problem. The best way to fix the socket is put it in a lathe and cut it back evenly.
Good video Tim. That guy looked like a fish out of water.
From your hoodie Tim I am reminded you went to Work Breu and we haven't seen that video yet. Is that still coming?
We did not shoot any video at Work Brau. Nice shop there, but it looked like many other fab shops. Didn’t think folks would be interested.
I bought a new 2000 JD 4400 and now it has over 3000hrs on it now. Iv done jobs with it that it wasn't made for and never had any problems with it.
Very good machines!
Tim, while Yanmar built those tractors, they were built to John Deere specs. What Yanmar did-purchased US axles that were spec or built the axle to those specs would have to be answered by someone in the design/supply chain at that time. One thing we do know, they were well built tractors as there are still lots of them being used.
Hey Tim, Greg Ritter SeaTac Washington if you remember correctly told you quite a while ago I’ve got a 4300 and I’ve only got 500 miles on it and I’ve been using it quite a little bit. I fold a couple oil tanks out of the ground big ones 300 gallon or bigger course they weren’t full, butmines been running real well I haven’t done any fluid replacement in the front axle whatsoever. I probably should check them now that you’ve brought it up. I think I will.
You should change the fluid in the front axle at minimum.
@@TractorTimewithTim Oh great now I gotta look up that info see if I got the stuff.
Hopefully I got my Otis Innovation front axle breather kit installed in time so that I don’t have to tackle that job….ahhhh but now I know who to call ;-) Blessings.
So, I see Dave's goto tool is a hammer... Not sure how well those work with cake decorating.
Not sure Dave appreciated cake decorating reference!
@@TractorTimewithTim 🤣🎂Just sing him another song, Kenny.
red thread locker, to disassemble, 450 degrees for 5 minutes will soften the compound making disassembly easy. Remember Loctite is not the only manufacture of "thread locker".
Great Video... Always a learning video.... 😮😅🍔🍔🍔🍔🍔🍔🙏👍
Blue for things you know you're going to take apart later read for things you never plan on taking apart again. Or that are very important that they never come apart.. hard to access. Can cause major damage. Stuff like that... Red.
When I did my 2001 4300 I had a piece of 2" square tubing and welded 4 pieces of hardened rod wire at each corner to make my own free socket. I didn't even have to hammer it to fit! Sorry couldn't resist. How can I send a pic.?
Enjoyed the video! I had a problem with the Fuse block in my 2018 B 3350 Kubota. After spending time trying to get the part and not available any place or any dealer I ended up using two truck fuse holders! Kubota really failed here!’
Wait, they couldn’t get the part (via order) for a 2018 tractor?
The only way you could be the part that was small and held a 50 and a 60 amp fuse was to buy the entire wiring harness for $2150. The fuse hold broke when I had to replace the 60 amp fuse which require force to take out. A simple factory solution would have been to cover the contacts with Dielectric grease...Tom@@TractorTimewithTim
@@thomasbarnes5703 awful! And the B3350 is not that old!
Use orange holds like red releases like blue
I thought Red Loctite was tor CaseIH and Blue was for New Holland!🙂
Any idea what the replacement cost was or a repair quote. I’m pretty nosey. From the JD Shop
I've never used red LocTite but what I want to know is why both the red and blue are in red tubes!!
Different subject what is the web site for the 3 point tiller you like
Simple cost effective one at tractorbasics.com. Use code ttwt
All of our screws and some bolts have blue on them in the Auto latch industry.
What drill bits do you use for metals
These are cobalt. Best I’ve had.
Watch those snap rings, Tim almost caught one in the teeth. I have dents in a steel wall to prove it.
the front axle on my 87 yanmar 226d looks identical to the jd 750 front axle. other than color.
Somebody should rent those sockets out.
Tim, I’m looking for a flail mower for my 3093R that also might fit the 5075E. 70-80”. Any ideas?
Of course I recommend the Maschio from agfolks.com use code ttwt for 5% off.
Ideas, ok, get someone else to do the mowing, while you sit around all day in your under pants drinking Super Tenants!, life’s too short.
Tim and Dave, would you be open to a transmission rebuild/swap on a 1025R?
Maybe. Email me.
Red as a great till you need to replace then impossible....
This old house of tractors.
I have an X595 4x4 with OEM loader, turf tires, gentle hours and a leaking front inner seal. I have the parts and am a shade tree mechanic but no joy finding a walkthrough on the process. Interesting that old tractor with a 3 cylinder yanmar has more hp than the new 10/2025’s. The little tractor that can. The hydraulics squeal but the dealer says it’s just the way they are??? Different dealer from the original selling dealer.
If you are local, and want us to help, let us know.
@@TractorTimewithTim Thank you! That would be awesome however we may be a bridge too far apart. I’m just outside Omaha. About how many miles from there?
@@mikehouser7587probably a bit too far.
@@TractorTimewithTim Yeah… appreciate the opportunity. God Bless!
Not mistakes, just enhancements!
Tim, off topic for this video but another channel revealed their JD farm tractor hood material fracturing all up (they spent $7k on a replacement hood) I wondered if you could go through your vast fleet of JD and alternative tractors to show all the hoods and materials in them. I thought JDs were fiberglass with inserts but it looks like this other channel's hood is all injection molded with poorly aging brittle plastic everywhere. Is that 'industry standard' now or just JD?
I do not know. I have had pretty good luck with ‘aging’, but I did break one on ole salty….by running a big stick up through it. Can’t really blame the hood for that.
would you want to put a single point hook up on a kubota tractor
Which model?
b1750 @@TractorTimewithTim
only has 3 hoses but will have a 4th for when i get the grapple bucket @@TractorTimewithTim
RTV room temperature Vulcanization
🇨🇦
Just me, or are snap rings the most dangerous invention ever. Useful, but horrifying.
But red is blue and blue is red.
Hey, you are showing the wrong way to insert the ring race
You heat the big part and freeze the small part. Just saying from formal training and experience. Joel @ 78 years....
FYI for your safety please use safety glasses. Your eyes are the only set the good Lord gave you so please take the time to protect them. 👍🏼
Not so, Tom Cruise in Minority Report swapped his out for a new pair!.
from a mechanic/welder of 48 years WHERE ARE YOUR SAFETY GLASSES !! never use drill press without them!!
Nope, because everyone just has a normal electric powered lawn mower, with a normal sized garden, not 200 acres of farm land and cow boy hats, wierdo’s!.
Wow.
Why not take a file to the nut & deepen the groove so that the nut now slips on the socket you have? Common sense rules.
I think our choices were sensible.