put a Thrush glasspack on my 98 Sentra manual about a week ago, I am used to using Cherrys but they are not made in America anymore while the Thrush glasspack still said made in America.
This is the Thrush Turbo 89027 kit from Summit Racing www.summitracing.com/parts/wlk-89027 The kit includes everything you need to make a dual exhaust sytem, collectors, h pipe, mufflers, tail pipes, clamps to bolt the pipe together, hangers to hang the pipes from the truck, and instructions. When I purchased the kit it was $264, it took a little over a month to arrive. I also got the headers from Summit Racing www.summitracing.com/parts/sum-g9006 Thank you for watching and good luck on your project!
Thank you! I see Summit offers a single exhaust setup passenger exit SUM-688012, and a single in dual out setup SUM-688350. I don't know if Thrush makes a kit, but the Summit kits are very comparable in quality and price at this level.
I believe the engine is a 305 from a 1979/1980 Malibu. I've been told that a 267/305/350 is basically the same engine block. This engine has had all of the emissions stuff removed. I think I can throw in any small block chevy engine and it should bolt right up to the mounts and turbo 350 trans. Does your 67 a have a small back window? If you ever have any questions or whatever feel free to ask! Thank you for watching!
@@billybuilds thank you for your response! The stamp on the engine block is 3970020. My research shows its from 1970-1973 small block. Im still trying to find parts for it. I need an alternator as well. Not sure if this is the same engine. its the big window
Looks like you got a small block chevy for sure, I would guess a 307. All the parts I've used in this video should bolt right up to your setup too, including headers. But always do your own due diligence and confirm. This is the Thrush Turbo 89027 kit from Summit Racing www.summitracing.com/parts/wlk-89027 I also got the headers from Summit Racing www.summitracing.com/parts/sum-g9006 The alternator I got from O'Reilly, its a 63 amp Ultima reman, R111621A. it's designed to fit this style of alternator bracket that was in a 1980 caprice, but common on alot of chevy small blocks. Just confirm your style.
These are Summit Racing headers SUM-G9006, comes with gasket. Used Trans-Dapt performance header bolts TRD-9943. I was able to install them from the top, only had to remove the alternator. It was easier to install spark plugs first, then headers but possible either way. I had to clock my water temp sensor in the cylinder head to clear the flange, or you can grind the flange there. Thank you for watching!!
These are 15x8" Rally 6 lug wheels from an 1986 k20 4x4 truck. I sanded them down and spray painted them with rustoleum hammered gray from home depot. Tires are cooper cobra radial gt 275/60/15. I got center caps from ebay. the Ride height is stock I believe. Thank you for watching!
Thanks for going through the install. I'm about ready to do the same soon. You have convinced me to go with this kit.
Awesome glad I could help you. For me this was the best bang for the buck
I'm excited to see how it turns out!
Awesome job and no modifications! 👍💯
Thank you! It was a super easy install overall, and cheap hahaha
Nice job young man.
Thank you! This project has been a blast
You made it look easy......im willing to give it a shot.
Hell yeah brother, it's really not that difficult. Can't wait to see and hear your results. Good luck and thank you for watching!
World class, sounds great!
Thank you!
Nice job
Thank you! Appreciate your support!
About the same kit for my truck. It was a real pain in the butt to put together
It was worth it though, yours sounds great!!
Very cool!!! Great video.
Thank you, it was alot of fun to make!
put a Thrush glasspack on my 98 Sentra manual about a week ago, I am used to using Cherrys but they are not made in America anymore while the Thrush glasspack still said made in America.
Nice, I like the old sound of the glass packs
Ey bro nice video can you tell were did you order the kit from and what is included I have the same truck as a project thanks
This is the Thrush Turbo 89027 kit from Summit Racing www.summitracing.com/parts/wlk-89027 The kit includes everything you need to make a dual exhaust sytem, collectors, h pipe, mufflers, tail pipes, clamps to bolt the pipe together, hangers to hang the pipes from the truck, and instructions. When I purchased the kit it was $264, it took a little over a month to arrive. I also got the headers from Summit Racing www.summitracing.com/parts/sum-g9006 Thank you for watching and good luck on your project!
Thanks again
You did a hella nice job....sounds good...... do they have a set up like that for a 88 Chevy Silverado?
Thank you! I see Summit offers a single exhaust setup passenger exit SUM-688012, and a single in dual out setup SUM-688350. I don't know if Thrush makes a kit, but the Summit kits are very comparable in quality and price at this level.
@@billybuilds Thanks Bro....Im on it.
What engine do you have? Just got a 67 c10 and it looks like same motor. Sorry new to this. Thanks
I believe the engine is a 305 from a 1979/1980 Malibu. I've been told that a 267/305/350 is basically the same engine block. This engine has had all of the emissions stuff removed. I think I can throw in any small block chevy engine and it should bolt right up to the mounts and turbo 350 trans. Does your 67 a have a small back window? If you ever have any questions or whatever feel free to ask! Thank you for watching!
@@billybuilds thank you for your response! The stamp on the engine block is 3970020. My research shows its from 1970-1973 small block. Im still trying to find parts for it. I need an alternator as well. Not sure if this is the same engine. its the big window
Looks like you got a small block chevy for sure, I would guess a 307. All the parts I've used in this video should bolt right up to your setup too, including headers. But always do your own due diligence and confirm. This is the Thrush Turbo 89027 kit from Summit Racing www.summitracing.com/parts/wlk-89027 I also got the headers from Summit Racing www.summitracing.com/parts/sum-g9006 The alternator I got from O'Reilly, its a 63 amp Ultima reman, R111621A. it's designed to fit this style of alternator bracket that was in a 1980 caprice, but common on alot of chevy small blocks. Just confirm your style.
@@billybuilds thank you so much. Ill review and I appreciate the response.
BTW would you have the part # for the alternator on your engine?
Is this a short bed or long????
Long bed.
What headers you using?
These are Summit Racing headers SUM-G9006, comes with gasket. Used Trans-Dapt performance header bolts TRD-9943. I was able to install them from the top, only had to remove the alternator. It was easier to install spark plugs first, then headers but possible either way. I had to clock my water temp sensor in the cylinder head to clear the flange, or you can grind the flange there. Thank you for watching!!
Woud this work for a 73 longbed c10?
I don't think this kit fits the 73 style. Try summit racing part number CMB-05-0159 for something similar. Thanks for watching!
No problem brother. Awesome truck!!
Thank you!! Good luck on your c10!
Turn u clamp up so u don't see as much of clamp Tio says looks better
That's a really good idea, check out the end of the install to see if I did that. Thank you
What rims you have on there?
These are 15x8" Rally 6 lug wheels from an 1986 k20 4x4 truck. I sanded them down and spray painted them with rustoleum hammered gray from home depot. Tires are cooper cobra radial gt 275/60/15. I got center caps from ebay. the Ride height is stock I believe. Thank you for watching!