Turbo Charging My Jeep Wrangler!
HTML-код
- Опубликовано: 5 окт 2024
- It's time to start turbo charging my jeep wrangler. Turbo time!
SUBSCRIBE ▶ goo.gl/WNUqnh
⚠ Machine Apparel ▶ machinemerch.com
Instagram : 3dmachinesvlog
FACEBOOK: / 3dmachines
Twitter: goo.gl/spfUvL
MY GEAR: goo.gl/YcPzCL
New Camera: goo.gl/oJ5K9Y
Tripod: tinyurl.com/3dt...
Gopro 4 - tinyurl.com/ycs...
vlog camera 1 - tinyurl.com/yca...
Vlog Camera 2 - goo.gl/1b5qMw
DRONE: click.dji.com/A...
FAN MAIL:
3DMachines
PO BOX 122
Gowanda, NY 14070
United States of America
Music: / aka-dj-quads
Here's to Jason. He's the only reason any of these haggard machines work.
Before you use that turbo, that engine has to be gone through. Can't just slap a turbo on a stock jeep engine because you might run the risk of blowing the head gasket or bending piston rods. Unless you plan on running low boost.
Travis Piper it’s a Jeep dude. Doesn’t need a whole lot of boost. Gonna be crawling around most of the time
SLEDDERGUY1 well knowing dalton who cant even get 2 hrs on a gator that he soent months on...
Hopefully it's legit seen them eBay's turbos kits make to much boost and easily blow the head gasket lol well see lol
Sam Jacobs he took apart the gator engine. The jeep engine will blow only of het takes that apart too lol
chickensfloat_ on_dirtbikes its guaranteed to fail! All his projects fail!
“Bolt-on Kit Without the Bolts”- 3dMachines
I run the same exact turbo kit with some other modifications. Bigger turbo, spilt second fuel/ timing, bigger cam, bigger fuel pump and injectors. 12 psi around 350hp to the wheels, also threw in a ford 8.8 with trutrac as well
What turbo is this
Wow. Doesthe transmition and the TC handle the 350WHP ?
@@sulimanalghaithi9342Not reliably
Woot woot 3D MACHINES !!!!!! New Upload
4.0L engine's are good for the most part and will run a long time. Some years had bad cylender head castings and are known to crack and Warp. I also know that the ecm is a barrier so you will need to get a piggyback but I'm sure you already knew all this
jep cooller in front of engine so air blows in straith to that if you keep it over engine you need big big BIG scoope to get cold air in there
Im so happy at the fact that you turbocharged the jeep before your bmw 😂
So rather than a new tub, boat side the thing, gets rid of the rusty body work and you gain additional clearance that will actually do something other than hang you up on the rocks. Look up Wrangler boat sides.
Is there a full installation video?
Cons: Too much heat to the IAT sensor, so the PCM pulls timing. This results in neat noise but little power gains if any at all. Stock with proper timing makes more power than a turbo with timing pulled due to high IATs.
That air to air cooler isn’t helping anything. For a TJ, you want a water to air HE in the grill to a top mount IC. That’s been the magic for me.
Super clean the engine
Cari Frank cleaning it would prib make it look worse since its prob so rusted and corroded
i think you should put a 6 inch suspension lift with fox shocks on it
We are lucky to have Jason
Wow, you bought a kit that puts the intercooler in the worst possible place. Smooth.
What’s up 3D MACHINES the Jeep is coming along really smooth keep getting the shots
you can actually linex the whole jeep and instead of worrying about paint you won't ever have to deal with chipping or scratches and it lasts forever.
your turbo manifold is warped where it come into contact with the turbo. You will most likely will need to get a new manifold or it could cause a major headache where it is not making boost. You can see it is not sitting flush with turbo turbine housing.
Rocky mountains here you come! Just run the exhaust through the hood. No muffler. A turbo is considered a noise cancelling device.
On the cost benefit analysis of the tub swap you forgot to factor in the time and frustration of every bracket, fastener, and all the wiring being transferred to the new tub. How is the charge cooler supposed to cool when it is sitting on top of the hottest part of the engine? Seems like you didn't get a well thought out turbo kit.
Yeah, us Canadians do some purty crazy shit when we're bored.
So would this kit work on the jeep WJ with the 4.0L ?
In addition to whatever else, the intercooler will need airflow and an oil cooler on the turbo, oil return could be a good thing... Good Luck on the project.
Froggy fresh!!!
yeah jason! havent seen him in a while!
Yeah boy another video
What about the monstaliner or raptor DIY kits? Linex is heaps expensive?! At least where i'm at anyway. Check out the DIY videos on youtube looks easy! Might even try get them to sponsor you!
Putting a 63mm turbo on my 2.5 and your video is so helpful!!!
Hey aidan im starting a 2002 jeep wrangler build and am installing a turbo do you have any tips on which one to get and how easg install was
@gioarese3742 I bought an ebay turbo and some titanium exhaust pipe. My biggest advice is that when you're ready for ECU tuning have someone experienced do it for you.
@ajaidan7940 how well does it run turbo'd, without an ecm tuning?
Looks sweet
Turbo inner cooler goes in front of the radiator where it can get cool air to cool the air inside the inner cooler. Behind the engine is the hot air.
Not how these kits are designed
That thing is going to be fun. Maybe more than Crush 🤔!
Who won the go pro
3D Machines you should make a name for the Jeep
You have to get lower compression pistons and better rods if u wanna put any boost over 10 pounds in that thing .
You better pony up and get a legit wideband gauge so you at least know when to lift so you don't melt it down. If that kit has a cheap wastegate you may have to get a real one to manage low levels of boost
Really should have that drain pipe in the pan facing up toward the top instead of angled down, its going to cause oil to pool in the drain hose.
Make the jeep look like a sponsored team crush vehicle
Wearing out your ball joints? with those luggerz
You’re gonna go fast
put this same kit on my 99 jeep had to put 40lb injectors and a map sensor that would read boost and tune it this thang will rip had no issues yet
I have the same project what map sensor did you used
Are you forced to run premium gas now?
Put a hood scoop on it right to the intercooler like a sti
well do you have a tune for the jeep? since the ecu won't be able to know where the hell all the air is coming from and won't remap itself to run a bit richer.
I thought intercoolers were supposed to be mounted in front of the radiator so that the air would be cooled before going into the engine, with it sitting on top of the engine in an area where there is no cool air how is that going to cool down the air going into the engine? I also agree with other commentators here on this post you will need to go through the engine and make sure it will be able to handle the extra pressure coming from that turbo and you will require a retune on that ECU for the turbo to be efficient and for you to get the power that you are looking for.
stoked for this build!!!
as a paint job, spray the jeep in rhino liner. will prevent rust scratches and look like the machine it is going to be
And where is it now? Where y’all go?
Boost leaks for dayzzzzzz
Before you run it, don’t forget to get it tuned
Iron rock off-road parts are the way to go for the jeep
heh dalton huhe fan, been with you since 50,000 subcribers
When u get everything done and take it off again will u do a video on u putting it all back on I have the same engine 4.0 but on a 95 grand Laredo and I'm wanting to turbo it
Why are you going down in height with the body lift?
Do a bike up date on the dirt bikes and street bike
There is nothing wrong with the old tub. Enjoy running it, you may roll it and have to get the new tub.
Zero notification RUclips keeping it classy
Don’t off-road that thing near water because the turbo will suck up water and you will be hating life just a warning it happened to one of our friends Jeep because we do a lot of Jeep riding
You’ll make more power with a front mount intercooler then with the top mount
I'd look up how much floor pans cost if they have them and cut out the old ones and weld in the new ones
Newest up load I have ever watched lol
Using gasket maker on an oil pan is dumb. Over time it’s gonna start to leak and could potentially block oil passages if it breaks ups Could’ve at least bought the gasket for the pan and used a little gasket maker to help it seal better.
I got my sweater today in tha mail so I’ll make a video just to show it off
rough country is a good brand my dad ran it on his trucks
Love the vids man keep it up
Good thing for those instructions with pitchers. ;)
Good thing Jason was there...
NIce vid man, I'm excited to see this thing progress.
Jerfish Entertainment Hey, I know you!
Make a hood scoop for the inercooler
Amazing
Do you know where to find the center caps for those wheels. I have the same ones
Good Job!
You've got some good buddies, buddy. I used to have that once. Then, I got a girl..we had a kid..and a new season of life followed. I'd like to see a vid profiling these guys. I'm sure all these introverts would scoff at the idea, but I'm willing to bet there'd be some demand from your subscribers. We appreciate those guys too!
Hey 3DMachines you should take crush
Make sure you use synthetic oil because turbos can burn regular oil
Let’s race our jeeps together. Ole in-line 4 against the turbo inline 6
What do you have done to you 4banger
Rough country is amazing I just helped my friend put a lift on his Jeep
Love your videos
you should keep te lift thats on it
i know this is a really old video but you mentioned a kit what kid is this iwnat it
What year is your jeep
You should come out to California
Did you even drive the Jeep before installing turbo?
Longer vids plz! But great vid anyways!
I just bought this kit or one close to this and it has almost no instructions HELP I need instructions pictures etc
Where did u tap for the oil feed! Doing the same kit
Did he announce the gopro giveaway winner???
Probably should of test drove it to see if it runs good before the turbo was put on lol.
I don't think you should get a new tub it's just pointless just fix er up! 🤘👍
Love the video
what size fuel injectors and brand? thank you
Did he announce who won the gopro?
Do you have a link to the turbo kit?
did you drive the Jeep at all when or after you installed the modified controller? drove it for at least a week?
just sayin
What happened to all the dirt bikes???
Keep the tub
You need raptor liner you could spray it
Love the videos
Nice video, keep it fresh😄🐸
Use the old tub so u can make a video on it
Ok cool!
Interested in selling the old body lift?