Tremec Magnum F arrived, improvements over T56, specs, cost for my fbody 3rd gen (Thirdgen) Camaro
HTML-код
- Опубликовано: 10 авг 2021
- I go over Tremec Magnum F improvements over LS1 T56, specs, and cost. Also what’s needed to bolt in your fbody 3rd gen (Thirdgen) or 4th gen Camaro and Firebird.
www.tickperformance.com/treme... 
Авто/Мото
I literality did this swap out today: 11/15/2023. I installed a '1998' T56 in my 454 equipped 1970 Chevelle back in 2004. The conversion kit I bought was from Weir Racing in American Canyon, Ca. and featured in Hot Rod Magazine. I got 20 good years from this combo. I have built a 540 Dart M block that will produce 700+ hp as the 454 is tired. I bought the 'exact replica T56 Magnum F" to support the major HP upgrade. FYI: The Tremic T56 Magnum F *** It is not an exact replica.*** The input shaft on the F Magnum is 6.5" long. The input shaft on my old T56 is 5" long. Nothing fit. I ended having to get a new bellhousing, new throw-out bearing, and new driveshaft. The modifications to my transmission tunnel with my original T56 install were not large enough for this extra 1.5". I am absolutely positive my original T56 Borg Warner is from a 1998 Camaro. Measure your input shafts if you are upgrading. Also, if you are doing this conversion, get the Holley X-Member for a GM A-Body. That is worth twice its price. Peace.
Info is awesome, got me a tr6060 from a 2014 hellcat, looking to put mine into an 80’s car with an iron block LS gen3 swap.
That’s an awesome tech talk! Thanks for sharing 👍
Thanks! I tried to do some research and made a few notes along the way.
Great info Stan. I’m still on a stock T56. My days are numbered 😂😂
LOL, like me and the rear
Interesting info. Keep em coming.... 😊
Thanks man, I really appreciate that!
Great video
Thanks 🙏
You forgot about the tremec T56 m12s Ive got a couple of them They had the lower 2.97 gearing and triple coned Syncros one came in a GTO it was the direct drop in my 99 z28 needed.. But I first got another one from a cts-v it looks like tr6060 but same internals as my other t56 the weird shifter and no tail shaft I still had to get it cause it came with a low mile complete 04' ls6 the 405hp one.
I've got the original borg Warner t5 cant wait to get me a magnum or a tkx
It’s amazing, Seriously!!!
Great run down! I’m torn on a Tick Performance Stage 2 rebuild or one of the Magnum -F when my stock ls1 t56 gives up the ghost.
I was thinking about the same thing, but when you look at the cost it’s pretty close and I just decided to sell the T 56 which puts a good chunk down on a brand new transmission
@@FireballMullet exactly what i just did! stock T56 was giving up and it was either stage 2 rebuild or Magnum F and i decided on the Magnum was the way
@@Zwh1t exactly! It’s a no brainer fir sure!
Big L for me, gambled on a used t56 though I did do my due diligence of testing it but turns out reverse was toast so ended up having to get it rebuilt and now the cost of the whole deal I could have just got the magnum F 🤦♂️
Sorry to hear that, yeah it’s just not worth messing with t56 now that these are out. It was even worth me selling mine with syncros destroyed, t56 is still expensive and worth money
What kind of fluid do you put in it
Will the MGW shifter on my current stock T56 work with a Magnum F? Dropping one into my 4th Gen.
Yes it will
Do you happen to remember what throwout bearing you used? I was gonna go with a tilton 6000 series but says 10.5" clutch so now im not sure itll work woth my ls7 clutch
The LS1 type throw out with the roller bearings
I'm looking for a transmission that is a direct fit into my 87 iroc with the nwc T5. I've heard some horror-stories of the T5 grenading that I'm considering swapping it out for something stronger. Do you know of any vendors that sell used or refurbished nwc t5's and that can ship to Norway? If not, do you know of any other transmissions that are a direct-fit? It has an lb9
Yeah, depends on your power level, but if you are starting to get up above 300 it is probably wise to look for a different one. Most guys looking for a better transmission will go to a T56 (4th gen) six speed. You can find a used one or check out Tick performance.
@@FireballMullet Hey man! The car is is stock engine-wise. It only has a different exhaust from the Y-pipe and back towards the rear, and KN-filters. Don't know what brand of exhaust it has. I think an exhaust-shop made it prior to to the car being shipped here. The roads are narrow and has alot of twists and turns so I'm mainly thinking of upgrading the suspension instead of the engine. The car feels fast enough as it is, with these roads. I like to do some accelerations and letting the tires rip when getting out of intersections once in a while. Feels good with 3.45 gears(Can't help myself, too darn fun). I'm thinking about the transmission just for peace of mind.
Thank you so much for answering me, I really appreciate it my dude!
FYI there is NO front mount shift pocket to mount a front shifter if you ever want to use in another application !!!!!!
technically yes you could use a 2012 Camaro remote shifter flipped 180* forward's, as i have a C7 transmission in a 60's charger and it's under the dashboard/firewall as i don't like kicking the shifter rod or boot and the back pocket if i was using the magnum or F-variant would put it behind me/hip's so to me it's uncomfortable to use AC-ace cobra style rod's my 2-C
Will this tremec magnum f t56 will be a direct fit for 1984 camaro t5 transmission I am putting a 383 engine in my car
For the most part it is a swap similar to a stock t56, I believe the only thing different is you may have to expand the shifter hole towards you
So what fluid for this bad boy ?
Same as t56, Dex 3
Why doesn't he show the other side?
No reason “he” is not lol
What clutch did you use
Monster twin disc …I did another video on it
Straight gear or automatic ?
Straight stick shift
Will this fit on a 2006 GTO?
It should bolt up but shifter location is different most likely.
@@FireballMullet thanks. But I did some research and it will fit only thing is the shifter lever is different. All I have to do is swap the shift lever and replace the yoke spline to 31. My new tremec F is arriving next Tuesday.
@@buddyrebel_Garcia sounds about right, that’s awesome man, great to hear you are getting one! They are worth every penny!!
@@FireballMullet yep I can’t wait to install it. The regular T56 on the gto was not cutting it. My gto makes 705 RWHP so this magnum should be able to handle it with ease so I heard.
Great information Stan. Greatly appreciated. I'll be looking into the magnum F at some point soon as well.
Just got my LS2/LSA swapped IROC running. Much of your information from your videos was helpful in getting me to this point!
ruclips.net/video/jKTV7O0N1U8/видео.html
Watched the video.. looks nice
Now all you need is a s60 Dana 60 differential from strange engineering to have a bullet proof drive train.9 inch ford saps a lot of power but is bullet proof too,or up grade the 9 bolt you have with 31 splin axle and carrier from 9bolt.com.expensive but worth it.
Haha that is the next weak link man… I’m tossing around the Hawks 8.8 also
@@FireballMullet yeah another great differential.