Logic Pro - Stacks vs. VCAs vs. Groups (What's the Difference?)

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 41

  • @MusicTechHelpGuy
    @MusicTechHelpGuy  Год назад +1

    In this video I demonstrate the difference between summing stacks, VCAs, folder stacks, and groups!
    Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor
    Check out my older "deep-dive" tutorial on this topic here | ruclips.net/video/JRe68qPVnPU/видео.html
    For mixing/mastering work, contact me at my website | carneymediagroup.com
    Follow MusicTechHelpGuy on Instagram | instagram.com/musictechhelpguy
    Support the channel on Patreon | patreon.com/musictechhelpguy
    Timestamps:
    0:00 Introduction
    0:27 Sponsor Segment
    1:05 Summing Stacks
    3:35 VCAs
    5:39 Folder Stacks
    6:08 Groups
    8:47 VCAs in Groups

  • @BigJosephWarrior
    @BigJosephWarrior 4 месяца назад

    What I love about this video- is the way each use case and functionality (the attributes) of summing stacks, VCAs, folder stacks, and groups are demonstrated, while each are being explained in a way that is so easy to grasp! I understand the similarities and differences. I understand the benefits of one vs the other depending upon my goal. It's really an enlightening video and it gave me new ideas of what I can do. Thank you MusicTechHelpGuy!

  • @Audiojunkk
    @Audiojunkk Год назад +3

    Thank you so much for making such great logic content. I’ve been using it for 15 years and you still teach me new things! You’re a legend.

    • @LesSand75
      @LesSand75 Год назад +1

      Yeah, I suppose it can get repetitive, but I just wanted to pile on this comment. These features are super useful and your video made them crystal clear. You're truly making a contribution to lots of people's lives by helping us with our artistic pursuits. Thank you so much!

  • @mysticalanalog5647
    @mysticalanalog5647 Год назад

    Thank you! It helped me better understand! I am using track stacks and will continue to work that way, but I now know why I don't use VCA or groups, and not only not using because I don't know what they do!

  • @Liam_Doherty_UK
    @Liam_Doherty_UK 2 месяца назад

    An extremely helpful and concise tutorial. Thank you for taking the time to make this video 👍

  • @thecanyonsisters
    @thecanyonsisters Год назад +2

    absolutely useful, clear and precise... as always. thank you !

  • @mjbellantoni
    @mjbellantoni 5 месяцев назад +1

    Came back to watch this a second time. Wish YT would let me hit like twice!

  • @dodo13500
    @dodo13500 Год назад +2

    Always something to learn in Logic. Thank goodness for your videos. Thank you!

  • @vikremsheker
    @vikremsheker 7 месяцев назад

    Excellent video. Much needed information

  • @raymondb8596
    @raymondb8596 Год назад

    Thanks!

  • @MatthewDovetail
    @MatthewDovetail Год назад +3

    And also, I'd say, control multiple busses' volume faders within a dedicated group or vca in order to make automations easier and making more busses at once share the same operations and happenings but keeping the summing plug-in and individual settings distinct! 8-)

  • @TeleStrat335
    @TeleStrat335 Год назад

    Thanks for this concise review.

  • @LokiBeckonswow
    @LokiBeckonswow Год назад

    super helpful video dude thx so much

  • @thugtrippin
    @thugtrippin Год назад

    really good video!!

  • @killyck6
    @killyck6 Год назад +2

    8:50 so VCA's essentially become something like a sub group in mixing desks? I generally always use summing stacks for mixing, it's become part of my workflow, but using groups and VCA's has recalled my attention - btw great and useful video, thanks!

    • @MusicTechHelpGuy
      @MusicTechHelpGuy  Год назад +1

      Exactly! They are just like sub groups, and they don't pass any signal through them.

    • @carlosandchrlys7889
      @carlosandchrlys7889 Год назад

      ​@@brianpylant4617 x2

    • @ST-fl5fy
      @ST-fl5fy Год назад

      @@brianpylant4617yes good question

  • @ENDOFFEB
    @ENDOFFEB Год назад +1

    so could you explain how a vca would effect the input level on say a parallel compression bus? would this be the same as routing the pre-fader parallel bus n the summing stack to a volume bus to control the stereo output without effecting the input signal? appreciate the videos you’ve clarified a lot tips n strategies for me ✍🏽

  • @gianni1646
    @gianni1646 Год назад

    Always the best for Logic Pro! 💫
    (Don’t know what that emoji means - but it has a star and it’s shiny!)
    Gianni❤

  • @leeahegg2377
    @leeahegg2377 Год назад

    This a nice and informative video, Honestly what is the benefit to use the VCA fader compared to the Summing stack?

    • @MusicTechHelpGuy
      @MusicTechHelpGuy  Год назад +1

      For many people, myself include, there isn't much of a benefit. I almost never use VCA's unless I want group volume control over certain tracks, but not others within a summing stack. I'll give you one recent example -- I had a project with 3 layered acoustic guitar parts, each recorded in stereo. The left and right channels for each guitar were on mono tracks, and panned accordingly. So 6 mono tracks total, 3 guitar parts. I put each group of 2 guitars in a VCA for individual volume control to keep the left and right channels the same volume, and then put all 6 tracks inside of a summing stack for buss processing. That's one example, where I would use them, but I know a lot of people who still like to use them, especially composer-types. The only real benefit is you don't waste a bus.

    • @leeahegg2377
      @leeahegg2377 Год назад

      @@MusicTechHelpGuy You mean the VCA's track can put it into the summing stack! Omg, it sounds cool, thank you so much!

    • @MusicTechHelpGuy
      @MusicTechHelpGuy  Год назад +1

      @@leeahegg2377 They don't necessarily "input" into the summing stack, because VCAs don't actually pass any signal through them, but you can assign VCAs to tracks within track stacks.

  • @thomasbroker69
    @thomasbroker69 Год назад +1

    Why don’t the faders move when assigned to a VCA ?

    • @MusicTechHelpGuy
      @MusicTechHelpGuy  Год назад +2

      Because it’s a “voltage” adjustment, not a fader adjustment.

  • @stevenblack552
    @stevenblack552 7 месяцев назад

    cool

  • @marcinkozlowski2880
    @marcinkozlowski2880 Год назад

    👍👍👍

  • @melchisedekj
    @melchisedekj 10 месяцев назад

    brother, you need some exfoliating products to properly clean your face.
    Remember to use a proper exfoliating glove or product instead of your hand and wash your face with cold water. Also remember to drink plenty of water.
    these tips will help you to clear all the pimples on your face and improve your money maker.

  • @matthewblue7839
    @matthewblue7839 Год назад

    I just send tracks to a common aux snd say name it, eg drums, have all controls and a master volume, why do anything else?

    • @MusicTechHelpGuy
      @MusicTechHelpGuy  Год назад

      That's the same thing as a summing stack. A summing stack is an aux track with multiple channels routed into it, but it also has the added benefit of the folder organization. But there's no difference from a signal flow and routing standpoint than what you are describing. That's the way I did it for years before summing stacks were introduced.

    • @jfbmusic
      @jfbmusic Год назад

      It's really a matter of preference and what's comfortable and natural to you, I think. Like Josh, once Track Stacks were introduced in Logic, that became my default over bussing some tracks to an aux and naming it. Those two operations are combined when you create a summing stack (with a keyboard shortcut, if you like those) and I like that that "aux" lives to the left of the tracks it's controlling, and that you can collapse it to keep the mixer lean and mean. :-)

  • @JakeRosen635
    @JakeRosen635 Год назад +1

    So there’s no reason to use a VCA over a summing stack?

    • @MusicTechHelpGuy
      @MusicTechHelpGuy  Год назад

      For my mixing workflow, no. I almost never use VCA's. However, I know many people who use VCA's all the time. If you want the group volume control without the summing, and without wasting any busses, that's when you could use a VCA. I know a lot of composer types that use VCAs to group the volume control of multiple instruments. 10 years ago, I used groups almost exclusively, but once they added track stacks, that's all I use now.

    • @philbauchmusic
      @philbauchmusic Год назад

      There's a reason for everything, really depends on what you do or want. Imagine for example some orchestra, typical sections strings, winds, metals. Now let's say you want all sections leader to control simultaneously, First violin, viola, cello, recorder etc... this might be one idea to use a group ,without having them "seated" close to each other (neither in the orchestra nor at your console hahaha. This is just one hypothetical example, the deeper you get into mixing more than just "typical" drums, bass, guitar etc band setup, the more reasons you will see for each option (or even, to combine them for several purposes). What I love in Logic, that the Apple guys did not put old stuff to legacy, but instead keeping them as another option you can choose from.

  • @biggareid
    @biggareid Год назад

    Honestly, all you would ever need would be summing stacks .

    • @MusicTechHelpGuy
      @MusicTechHelpGuy  Год назад +1

      For my mixing workflow, yes. Summing stacks are really all I use. But I know plenty of people who like to use VCAs. If you need grouped volume control, but don't want the summing, or don't want to waste any busses, that's a way to do it. I know a lot of composer types that use VCAs to group the volume control of multiple instruments. 10 years ago, I used groups almost exclusively, but once they added track stacks, that's all I use now.

  • @Lematidas
    @Lematidas 8 месяцев назад

    Thanks!