mine fits perfect with the glock label rail lock. first slide the light piece off the mounting bracket then line it up with groove and it pops right on then slide the light piece on and slide it all the way back then push it one click foward and flip the locking latch. its not going anywhere. hope this helps some one.
Thank you, I was trying different ways to keep that Olight mini 2 on my Hellcat. So I came up with taking that nub thing that u ground down off and putting a tiny screw in each of the holes left from taking that nub off, I screwed the tiny screws until a little stuck up to grab in the Hellcat groove. It worked. I bought a kydex holster from Etsy , it's for the Olight mini 2 and the Hellcat. Now my Olight stays on my gun I stead of coming off into the Kydex holster. But now I'm going g to grind that nub thing that's suppose to fit in the groove under the rail of my gun like you showed me. I also turned the arm that locks down the Olight to the rail. So now when I lock it on the lock is flipped to the front instead towards the trigger guard. I thank you so much for showing me the solution as to keeping the Olight snug on the rail. Now go to Eptsy and order the Kydex for your Glock and your Olight.
Thanks for the vid. Looking for a comparable light for the Hellcat.. I’m sure, with time, featured accessories will come out for this gun. I just can’t wait! Thanks again
NP man! Yeah just give it time. I sure Varidian (not too impressed with much of their stuff however) Streamlightbor maybe Olight may jump on it as well!
How do you like that glock 10mm ? The hellcat I love it but I don’t think the pl mini 2 fits. I have been looking for an xd .40 subcompact I can’t find it anywhere
I Live the 10mm. Such a solid powerhouse. I dropped a KKM precision barrel in it and actually noticed a much higher degree of accuracy as well. I have an XDM40 and live that too.
Yes I did, I just shaved the bar and screws down a bit but left enough to where I can still insert torx bit to still remove screws if and when I need to.
I haven't found the card for the local guy I met here at last the Tanner Gun show before COVID hit. But I ordered a custom Kydex IWB from Fierce Defense Holsters support@fiercedefender.freshdesk.com back in February for my Glock 23 with the older original version of the Olight PLMini and it came out VERY nice with a perfect fit. I love that light (although only 300-400 lumen) as it fits my G23 (also G19) perfect and flush with the barrel and frame. BUT I do use an IWB leather holster I believe made for a smaller S&W compact semi 9 that fits my HELLCAT PERFECT (without the light) made by a local company here in my area (Baily Colorado) by the name of Sweetwater Saddlery. The item # stamped on the back of it is 1164SWS. Quality shit if you like leather as well.
So my olight baldr mini came with a second set of smaller rail to screw it that is for this exact fit. The larger one is made for a larger pic or weaver notch. Which I could find a video of someone installing it right to see how it fits on the hellcat
I picked up that same Balder Mini laser as well. The 2 rails are labeled GL for Glock and will fit many other rails as well and the other is labeled 1913 (yes picatinny) but that size difference is front to rear difference. They all are the same height and the new Balder Mini I believe would need to be trimmed down as well for the HELLCAT. Or you can like a few people have commented here, leave the insert off and just rely on the clamp lever to attach the light to the rail BUT with such a short rail I wouldn't want to risk the light getting bumped and sliding forward off if this short ass rail.
mine fits perfect with the glock label rail lock. first slide the light piece off the mounting bracket then line it up with groove and it pops right on then slide the light piece on and slide it all the way back then push it one click foward and flip the locking latch. its not going anywhere. hope this helps some one.
All you had to do was take the glock plate off and put the screws back in. Fits perfectly level.
Thank you, I was trying different ways to keep that Olight mini 2 on my Hellcat. So I came up with taking that nub thing that u ground down off and putting a tiny screw in each of the holes left from taking that nub off, I screwed the tiny screws until a little stuck up to grab in the Hellcat groove. It worked. I bought a kydex holster from Etsy , it's for the Olight mini 2 and the Hellcat. Now my Olight stays on my gun I stead of coming off into the Kydex holster. But now I'm going g to grind that nub thing that's suppose to fit in the groove under the rail of my gun like you showed me. I also turned the arm that locks down the Olight to the rail. So now when I lock it on the lock is flipped to the front instead towards the trigger guard. I thank you so much for showing me the solution as to keeping the Olight snug on the rail. Now go to Eptsy and order the Kydex for your Glock and your Olight.
Nice job. Glad to be of help. I'll look up that Co. soon, thank you! 👍
Thanks. Need to make this mod on my setup.
My pleasure. So now Springfield has come out with the Kitty Pro. A tad more length and height. More room on the rail now. Vroom!!!
Off topic but what is the knife
I did the same thing but i had to do it with hand files that was fun but i got it. Lol
BetterTrigger makes a key that specifically fits the Hellcat. Very affordable and inexpensive shipping.
Man has good tastes. Hate supporting foreign products but sometimes the value per dollar is too high to ignore.
I hear you man 👍🏽
Which adapter did you grind the universal or the glock adapter ?
Thanks for the vid. Looking for a comparable light for the Hellcat.. I’m sure, with time, featured accessories will come out for this gun. I just can’t wait! Thanks again
NP man! Yeah just give it time. I sure Varidian (not too impressed with much of their stuff however) Streamlightbor maybe Olight may jump on it as well!
Viridian C series fits on there perfectly too
How do you like that glock 10mm ? The hellcat I love it but I don’t think the pl mini 2 fits. I have been looking for an xd .40 subcompact I can’t find it anywhere
I Live the 10mm. Such a solid powerhouse. I dropped a KKM precision barrel in it and actually noticed a much higher degree of accuracy as well. I have an XDM40 and live that too.
Thanks for video 👍
Did you shave the screws too?
Yes I did, I just shaved the bar and screws down a bit but left enough to where I can still insert torx bit to still remove screws if and when I need to.
You don't have to shave the screws. ruclips.net/video/-dhn9XPdBGA/видео.html
who is doing your iwb? for that hellcat/olight?
Slimfit holsters
I haven't found the card for the local guy I met here at last the Tanner Gun show before COVID hit. But I ordered a custom Kydex IWB from Fierce Defense Holsters support@fiercedefender.freshdesk.com back in February for my Glock 23 with the older original version of the Olight PLMini and it came out VERY nice with a perfect fit. I love that light (although only 300-400 lumen) as it fits my G23 (also G19) perfect and flush with the barrel and frame. BUT I do use an IWB leather holster I believe made for a smaller S&W compact semi 9 that fits my HELLCAT PERFECT (without the light) made by a local company here in my area (Baily Colorado) by the name of Sweetwater Saddlery. The item # stamped on the back of it is 1164SWS. Quality shit if you like leather as well.
So my olight baldr mini came with a second set of smaller rail to screw it that is for this exact fit. The larger one is made for a larger pic or weaver notch. Which I could find a video of someone installing it right to see how it fits on the hellcat
I picked up that same Balder Mini laser as well. The 2 rails are labeled GL for Glock and will fit many other rails as well and the other is labeled 1913 (yes picatinny) but that size difference is front to rear difference. They all are the same height and the new Balder Mini I believe would need to be trimmed down as well for the HELLCAT. Or you can like a few people have commented here, leave the insert off and just rely on the clamp lever to attach the light to the rail BUT with such a short rail I wouldn't want to risk the light getting bumped and sliding forward off if this short ass rail.
Just unscrew everything. Take out the metal piece. Then put ONLY the screws back in. Problem solved.
Then your light doesn't lock onto the rail. It can bump or slide off.
Or you can buy a tlr7sub and be done with it