Hi, we have same model of Frymaster MJ35. I already change the operating thermostat but still don't shuts off on the set temperature. Turns off only on 425 degrees.
Our fryer always has an issue with turning on mostly when we change it’s oil. A repairman came and said all it needed was to be reset” but that never works and always started up randomly after a while it sometimes instantly. He mentioned maybe there was oil in the starter? No idea what it where that is.
What about electric fryers? i have a gold metal corn dog fryer that just stopped working , i checked the power coming in and that is fine.this unit does not seem to want to power up, no red light no heating. any ideas?
here in Austin I've found many "NG" fryers not working in food trucks because they've been connected to LP (liquid propane)!!! and the $350 NG valve is now busted. :( one time a fancy bbq outfit had me come to ACL to work on their 6 fryers they had brought there. all were NG! and all but one NG valve survived being connected to propane. plus labor, that single oversight cost them 450 times 5. very sad... hard to break the news to them that 5 valves were busted. :( if you have a food truck make sure your regulators and valves are up to spec. oh and account for airflow to your condenser on your refrigeration. A lot of food truck builders don't factor that in... you can route fan to pull air out or you can install an external vent on the side of food cart or you can pull that unit away from wall 4 to 6 inches... your choice.
Hello, I would like to know more about the Flume burner. I have a ( dean) MDL sr142 GP One of the burners has a bunch of black carbon buildup clogging one. Can this be fixed? and why is this doing this?
I’ve got a fry master fryer pilot light stays on but only one if burner lights and other five won’t light. But they will if you light them direct. Staying on only for few seconds after lightning them all and goes out
thermostat is verry important in a fryer. they work as safety device in the system to protect the unit itself as well as the operators. they can be by pass for temporary to keep our fryers working. but my sudgestion is to replace it by the time you found it un accurate.
That depends on the thermostat controlling the unit. Ideally, we wouldn't like to see it get that low, but it's subject to whatever the engineers designed it with. - Tundra Team
I love the concept for the video but honestly, you need to be more descriptive with your explanations. You talk about this wire and that wire and this and that setting but you don't explain how to adjust any of them
What is happening when the fryer pilots lights great turns on great and as soon as it reaches a certain temperature it cuts off ?
Did you find a solution, mine is doing the same. Pilots fine, it reaches temp once then shuts off
at 2:00, what type of wires are these? do they vary by models? Thanks
I have an older pitch fryer the pilot comes on but the burner doesn't light
Are pilot light stays on but our burners shut on and off and takes a while to heat what could be wrong or is this normal
Hi, we have same model of Frymaster MJ35. I already change the operating thermostat but still don't
shuts off on the set temperature. Turns off only on 425 degrees.
I'm looking for some help on how to clean the back of the deep fryer the bucket that sits in the back mine is full of debris
Our fryer always has an issue with turning on mostly when we change it’s oil. A repairman came and said all it needed was to be reset” but that never works and always started up randomly after a while it sometimes instantly. He mentioned maybe there was oil in the starter? No idea what it where that is.
What about electric fryers? i have a gold metal corn dog fryer that just stopped working , i checked the power coming in and that is fine.this unit does not seem to want to power up, no red light no heating. any ideas?
Jumping high limit that was hard to follow. I knew what you were saying. But a person new might have some problems.
here in Austin I've found many "NG" fryers not working in food trucks because they've been connected to LP (liquid propane)!!! and the $350 NG valve is now busted. :(
one time a fancy bbq outfit had me come to ACL to work on their 6 fryers they had brought there. all were NG! and all but one NG valve survived being connected to propane. plus labor, that single oversight cost them 450 times 5. very sad... hard to break the news to them that 5 valves were busted. :( if you have a food truck make sure your regulators and valves are up to spec. oh and account for airflow to your condenser on your refrigeration. A lot of food truck builders don't factor that in... you can route fan to pull air out or you can install an external vent on the side of food cart or you can pull that unit away from wall 4 to 6 inches... your choice.
What if the pilot lite lights but doesnt hold and connect with ths gas
Hello, I would like to know more about the Flume burner.
I have a ( dean) MDL sr142 GP One of the burners has a bunch of black carbon buildup clogging one. Can this be fixed? and why is this doing this?
I’ve got a fry master fryer pilot light stays on but only one if burner lights and other five won’t light. But they will if you light them direct. Staying on only for few seconds after lightning them all and goes out
I have flames coming up and out of my flue, any answers?..I cleaned the tubes
What could be a reason the back side of deep fryer has laud poping sound. Jason
How do you fix a no sound issue on one?
Do you know what would cause fire to go higher than norm? Hard to explain; but when I open door to fryer; flame actually so high it fares out. Yikes
Have you had experience with Dean deep fryers ? Someone recommended that we get one instead of a frymaster ?
who can i call to have come look at our commercial deep fryer at work,to see what needs to be fixed?thank you for your time.
Thank you for your time.
ive worked on fryers for years and the last thing i would change is the gas valve.
tq sir for your tips… now i have trouble pilot not lighting…
hi, i can light the pilot , but once we turn up the temperature, the pilot went out. What is wrong with it?
Sounds like the thermopile is weak.
Thanks for the video
Thanks!
What does it mean when a continuous beeping than open probe keeps flashing
On an electric fryer
bad thermocouple
thermostat is verry important in a fryer. they work as safety device in the system to protect the unit itself as well as the operators. they can be by pass for temporary to keep our fryers working. but my sudgestion is to replace it by the time you found it un accurate.
how much of a difference should there be for the fryer to recycle? like say i set it 350, should it come back fireing again when it drops ot 330?
That depends on the thermostat controlling the unit. Ideally, we wouldn't like to see it get that low, but it's subject to whatever the engineers designed it with.
- Tundra Team
yea automatically! if not then have it replaced.
10-15 difference other wise calibration must be done
gas fryer repairs/installation
I love the concept for the video but honestly, you need to be more descriptive with your explanations. You talk about this wire and that wire and this and that setting but you don't explain how to adjust any of them
Vulcan fryer
Thermopile
grate end user is going to fix his own fryer real smart have some who knows nothing about gas
hi idiot, do you thing everyone lives in the USA and in the little town where you are?
All you said was this and that maybe wrong with it
You basically didn't tell me how to test anything
😂😂😂😂😂
Thermopiler smh I see someone skipped English