I'm not sure that your information is correct. That transmitter (if stock) cannot be set to transmit the S-bus serial output to the iA6B receiver. Perhaps you have the Flysky FS-i6X transmitter which can be set to transmit S-bus - or possibly a modified FS-i6?
Hi, I love my FS-i6X I have a problem with flying with Nitro power... MY problem is the main Throttle trim on the front of the transmitter For some reason will not move a SERVO ( try it yourself) I think it has something to do with speed controllers verses a SERVO hooked into channel 3 .... All the other trims will move servos just fine but NOT channel 3 there is no info in the user guide... and I have a different FLYSKY transmitter too (FS-ST8) which the same problem exists... Any ideas for me... Robbie
Thanks Yeah, Your the first one to NOT tell me I'm crazy... I got a SPEKTRUM for my NITRO planes..I still use the FS-i6X for park fliers and such things.....@@JohnsOldMercurySite
@@robbietrumpet That didn't seem correct but I thought that I should check before commenting. Using My Flysky FS-i6 bound to an FS-iA6 PWM receiver and a crappy 9gm servo plugged into the ch3 Throttle pins the servo can be moved by using the Throttle trims. Pretty roughly since it is a very low resolution servo but completely consistently whether the Throttle stick is fully down or in the central position. That makes sense since ALL the output channels see the same 1000usec to 2000usec PWM sweep with the stick or switch assigned to them. UNLESS ARTIFICIALLY RESTRICTED!!! Turn your Throttle lock OFF and try it again! 🙄😉😊
SIR, 63 yo Alabama , USA. Hope ur well an out here still.? My channel on utube reachs few, If I can help only one person get along a little better, as U have with me today, its worth the time.!! Stumbled on this zohd video. Im stumped on my Low end Spectrum. Dx6i . Zohd wont work correctly,. Want to fpv very Looooowww Budget, lol. This flysky trabsmitter seems to be answer for the 2 Zohd copilots i have.. Tks for utubing a low end transmitter that is highly underated, and worth the effort. Heres to Low Budget Flyiers!!. Lol. Regards Captain John
there is no restrictions how far IF YOU ARE SET TO RETURN TO HOME MODE.....if you set it up with geofencing ( I dont use) you can adjust how far you are allowed to fly
@@jaytank31 you're good to go.... your only restriction is the range of your Radio and receiver and ofcourse it will switch to return to home mode if the signal is lost to test this ...while on the bench powered and gps is locked on .......get in manual mode or stabilized mode and then turn off the transmitter, your kopilot lite will change to show it is in return to home mode ....watch to make sure the lites change on the kopilot
I know all about the regulations,, I have AMA membership and Registration # for my drones and Airplanes.
I am useing the same setup with the ZOHD and GPS.. Do I still need a Remote ID Module on my Sonicmodell Binary Twin?
you still need a remote ID it has nothing to do with your autopilot system....its govt registration which will lead to licenses, insurance, etc etc
hi, i can't understand as long as the failsafe at -100 matches the stabilizer and not the rth ...
5 stars ⭐️
What's so cool about that tx is it let's you choose ibus or sbus. I'm running sbus using kopilot, that controller and that rx
I'm not sure that your information is correct. That transmitter (if stock) cannot be set to transmit the S-bus serial output to the iA6B receiver. Perhaps you have the Flysky FS-i6X transmitter which can be set to transmit S-bus - or possibly a modified FS-i6?
@@theoztreecrasher2647 your correct I have the fs i6x. No mods.
@@papamidnightfpv Thanks Isaiah! That 1 works fine. They are an excellent value and good range little uncomplicated radio and receiver. :-)
Hi, I love my FS-i6X I have a problem with flying with Nitro power... MY problem is the main Throttle trim on the front of the transmitter For some reason will not move a SERVO ( try it yourself) I think it has something to do with speed controllers verses a SERVO hooked into channel 3 .... All the other trims will move servos just fine but NOT channel 3 there is no info in the user guide... and I have a different FLYSKY transmitter too (FS-ST8) which the same problem exists... Any ideas for me... Robbie
WONT WORK IT WANTS TO SEE A SPEED CONTROLLER ....SORRY
Thanks Yeah, Your the first one to NOT tell me I'm crazy... I got a SPEKTRUM for my NITRO planes..I still use the FS-i6X for park fliers and such things.....@@JohnsOldMercurySite
@@robbietrumpet That didn't seem correct but I thought that I should check before commenting. Using My Flysky FS-i6 bound to an FS-iA6 PWM receiver and a crappy 9gm servo plugged into the ch3 Throttle pins the servo can be moved by using the Throttle trims. Pretty roughly since it is a very low resolution servo but completely consistently whether the Throttle stick is fully down or in the central position. That makes sense since ALL the output channels see the same 1000usec to 2000usec PWM sweep with the stick or switch assigned to them. UNLESS ARTIFICIALLY RESTRICTED!!! Turn your Throttle lock OFF and try it again! 🙄😉😊
SIR, 63 yo Alabama , USA.
Hope ur well an out here still.?
My channel on utube reachs few, If I can help only one person get along a little better, as U have with me today, its worth the time.!!
Stumbled on this zohd video.
Im stumped on my Low end Spectrum. Dx6i . Zohd wont work correctly,. Want to fpv very Looooowww Budget, lol.
This flysky trabsmitter seems to be answer for the 2 Zohd copilots i have..
Tks for utubing a low end transmitter that is highly underated, and worth the effort.
Heres to Low Budget Flyiers!!.
Lol.
Regards Captain John
Will it work on a nitro helicopter in place of 72mhz system with jyro would like to know
No Sorry only planes with "throttle, ailerons and elevator"
Thank you i set my dart xl up just like you set yours up. I still havent flown it how much area do you need to fly
there is no restrictions how far IF YOU ARE SET TO RETURN TO HOME MODE.....if you set it up with geofencing ( I dont use) you can adjust how far you are allowed to fly
@mwbvideos i have return home set. Thanks
@@jaytank31 you're good to go.... your only restriction is the range of your Radio and receiver and ofcourse it will switch to return to home mode if the signal is lost
to test this ...while on the bench powered and gps is locked on .......get in manual mode or stabilized mode and then turn off the transmitter, your kopilot lite will change to show it is in return to home mode ....watch to make sure the lites change on the kopilot
When i turn my radio off my kopilot doesnt go into fly home mode
@@jaytank31 ARE YOU TESTING THIS OUTSIDE where you're Certain you have GPS & Satellite connection it wont go into RTH unless the GPS is connected