This was perfect, I followed every example in real time with my similar model and everything worked perfectly, absolute time and frustration saver, thank you 👏
As I understand it you are very knowledgeable and have expertise in the programming of that ecobubble machine. Ours is a WF90F5E etc...... my wife has never got the softener to work properly and it may well be programming? As an engineer I found the instructions same as many others crap? Please could you point us in the right direction to enable us to understand how top operate the fabric softener. I see by total chance many others are floundering with thew digital programming of the Ecobubble washer. It seems that the more complex the appliances get the less explicit the instructions are and it's high time the big name manufacturers sorted out good quality how to use books & not rely on you kind fil makers on You Tube. They are cheeky xxxxxxxxrs.
I have a Samsung ecobubble 6.0kg an the drum doesn't turn on any cycle I put it on whether it is wash or rinse. I have noticed that when it's standing upright an I open the door an try turning it from inside it gets stuck but I noticed that it seems asif the drum is loose coz with the door open I can lift the drum from inside an turn while keeping it lifted it turns no problem. As soon as I stop lifting an I try turning it again you can clearly hear there's something beneath the drum cz it's making a grinding noise. I tried everything suggested in the videos posted but can't seem to get the item that's causing the grinding noise out. The other thing is I'm not sure but to me it's like the drum came off whatever makes it turn on inside..... so any other solutions please I'm really desperate . My model is a Samsung ecobubble 6.0kg front loader model WF1600W5W
Funny as it is, I opened the machine to get to the board, but after so many screws and plugs, I realized that it was an endless job, so I put it back together again and for my surprised, after that it actually started working normally again... How about that. Maybe there was some plug badly connected or some other stuff that maybe got properly connected and it started working. It's been 1 month now, and until now, it still runs normally.
@@hugotorres7160 intentá poner modo cb, de calibración. no se como se hará con tu modelo. pero en el mio es temperatura+termino retardado al encenderla
Please help me I’ve got the for said Samsung washing machine and it’s showing 4E I’ve done all normal tests ie checking water and cleaned the filler filter and made sure everything even down to the pump is very clean and cleaned the powder drawer out properly yet on a daily wash it’s showing the 4E but ok on a quick 15 min wash . Kind regards Craig
Hi! I have the same machine and during the program its loose power and its like is with out power! I have to switch off the power for 5 minutes and turn it on again to work...
Hi, I've got a machine that does not spin a drum So I am tempted to replace the Control board. Is there any way to make some measures to prove the fault of the engine or micro processor
I have this machine and from new it’s vibrated so badly. Shipping bolts are out. Legs are levelled. Even tried it on top of concrete slab and the same. Tried calibrating it. Do you know of any fix ? Is your floor a concrete one there ?
It worked like magic… surprised Samsung haven’t got this video banned cause they don’t mention this at all when you phone them about problems and still in warranty! maybe someone at Domestic and General are giving bribes 😂😂 washing machine working now thank you!!
Saba Khan where do you know all Samsung washing machines use direct drive motor? And you think this one uss direct drive motor? I still hear the brushes sound from this one when tumbling and spinning
This is neat. But I have to profess my ignorance: why? What does this enable you to diagnose? Is it that when you progress through these functions and then something doesn't work then you have your diagnosis? Like others I'm thinking I've a failed control board, but not sure how ;)
Hi, i have the same washing machine and just when it starts the process you can hear the pump and then it's start to do a high spin and appear an e3 code. Please help. Thanks in advance
generally means your door is locked while in use - only early in the cycle you can press pause and open the small additional flap on the door if it has one
Jus wandering when you pull the soap dispenser out where the water goes that was going through the soap dispenser to the drum Does it goes between the drum and metal side panel and drop out on the floor or does it still goes inside the drum.
Sir, I used samsung 9kg digital inverter front load fully automatic machine, that machine working time came one problem, few moment working our machine after automatically paused, that time opening machine inside water, don't drying waste water, now 2 times change already main electrical board, then don't re solve it our problem, Sir, Please give me any remedy Thanks 🌹
Hvala Vam.Proradila poslije ovoga!Inače stajala u sred programa i samo se pauzira i zaledi.
This was perfect, I followed every example in real time with my similar model and everything worked perfectly, absolute time and frustration saver, thank you 👏
ჯჯ
ნ
Grazie mille per i tuoi consigli,sono riuscito ha riparare la mia lavatrice, grande 💪
God I can’t say how many times I’ve watched yr video on this machine. Yr a god send x
As I understand it you are very knowledgeable and have expertise in the programming of that ecobubble machine. Ours is a WF90F5E etc...... my wife has never got the softener to work properly and it may well be programming?
As an engineer I found the instructions same as many others crap? Please could you point us in the right direction to enable us to understand how top operate the fabric softener.
I see by total chance many others are floundering with thew digital programming of the Ecobubble washer. It seems that the more complex the appliances get the less explicit the instructions are and it's high time the big name manufacturers sorted out good quality how to use books & not rely on you kind fil makers on You Tube. They are cheeky xxxxxxxxrs.
Goooodaaa
Very important bt if in urdu many bodies improve 😊
I have a Samsung ecobubble 6.0kg an the drum doesn't turn on any cycle I put it on whether it is wash or rinse. I have noticed that when it's standing upright an I open the door an try turning it from inside it gets stuck but I noticed that it seems asif the drum is loose coz with the door open I can lift the drum from inside an turn while keeping it lifted it turns no problem. As soon as I stop lifting an I try turning it again you can clearly hear there's something beneath the drum cz it's making a grinding noise. I tried everything suggested in the videos posted but can't seem to get the item that's causing the grinding noise out. The other thing is I'm not sure but to me it's like the drum came off whatever makes it turn on inside..... so any other solutions please I'm really desperate . My model is a Samsung ecobubble 6.0kg front loader model WF1600W5W
You see a star , you just saved me
???
I think he wanted to say you are a star
Thank you so much you saved me money and time have a great day 👍
Ești genial datorita ție mașina mea din nou funcționează Mulțumesc
Franchement merci beaucoup pour les informations 😊😊
You had a cheetsheet for the typenumber on your hand 😂
Thanks anyway, I did not even know that a testcycle exsisted.
Better than the new samsung's washing machine models 👌
my man u earned a sub
Thank you! Fixed my problem. Really clear.
Yeah sure !! Who wouldn't like this amazing information...
I have a washer just like this one. It is stopping on all programs. Do you know what that might be?
Funny as it is, I opened the machine to get to the board, but after so many screws and plugs, I realized that it was an endless job, so I put it back together again and for my surprised, after that it actually started working normally again... How about that. Maybe there was some plug badly connected or some other stuff that maybe got properly connected and it started working. It's been 1 month now, and until now, it still runs normally.
@@hugotorres7160 intentá poner modo cb, de calibración. no se como se hará con tu modelo. pero en el mio es temperatura+termino retardado al encenderla
.Thankyou so much,machine now perfect
How does your machine not shake when spinning?
Thank you so much. Really appreciate your help. God bless you.
The drum doesn’t pump out all the water in it and doesn’t spin on the spin cycle after either
Mine has the same issue did you find out what caused it?
Same problem did you fix it
Hey, thanks for the video, you can made a one video tutorial with showing rpm contator on the spin on test mode?
If get another one in the workshop will do
Ok, i wait the video
only a couple days after I left for my first child
There is a lock button when I start to wash. What might be the cause
That’s a strange test cycle most others like Beko you just press one button to run through test stages .
You are the best! Thank you very much! Jack Daniels is waiting for You😁👍
Je souhaiterais savoir svp pourquoi la machine ne rempli pas d eau
hi kol, maaung buntag, ako ning gi try skong washing machine di man mo gana lge hahaha
Please help me I’ve got the for said Samsung washing machine and it’s showing 4E I’ve done all normal tests ie checking water and cleaned the filler filter and made sure everything even down to the pump is very clean and cleaned the powder drawer out properly yet on a daily wash it’s showing the 4E but ok on a quick 15 min wash . Kind regards Craig
Hi! I have the same machine and during the program its loose power and its like is with out power! I have to switch off the power for 5 minutes and turn it on again to work...
How should i do,my washing machine is in trouble ..Dc always appear
Hello is this noisy washing machine? Is this normal?
Thank you! It was a good help!
My machine turned itself off at the spin cycle and didn't pump all the water out is that where the problems lay?
by my Samsung Ecobubble was the bottom RISE and SPIN for the testmode
Thank you, you helped me a lot and fixed my problem!!!
Molte grazie fratello ❤
I love samsung ecobubble washing machine
Can I have?!
Thank you! Save me a call out. I have a second problem with control panel very feint. Anyone have any further ideas?
Please what does code 3C means thanks
What if the drum doesn’t turn after doing this?
Hi, I've got a machine that does not spin a drum So I am tempted to replace the Control board. Is there any way to make some measures to prove the fault of the engine or micro processor
I like how it yeets from 600 to 1400 in a few seconds. I might just buy a samsung just for the test mode lol
why does it look like samsung just went fhfyhghygvngsd on the keyboard
Hi, I have a malfunction in the Samsung washing machine LEI malfunction code. How can I fix it......hallo
Search it up on RUclips, you may find how to fix.
Good, you're testing!
What is that key symbol about ?
I have this machine and from new it’s vibrated so badly. Shipping bolts are out. Legs are levelled. Even tried it on top of concrete slab and the same.
Tried calibrating it. Do you know of any fix ?
Is your floor a concrete one there ?
Wheres button for drain motor tes
It worked like magic… surprised Samsung haven’t got this video banned cause they don’t mention this at all when you phone them about problems and still in warranty! maybe someone at Domestic and General are giving bribes 😂😂 washing machine working now thank you!!
Is my drum meant to isolate when it spins? Ta
Merciii❤
All Samsung machines have direct drive motor
Saba Khan where do you know all Samsung washing machines use direct drive motor? And you think this one uss direct drive motor? I still hear the brushes sound from this one when tumbling and spinning
IS there any specific test to check the control board proper functioning ? ( button keys stuck ? )
This is neat. But I have to profess my ignorance: why? What does this enable you to diagnose? Is it that when you progress through these functions and then something doesn't work then you have your diagnosis? Like others I'm thinking I've a failed control board, but not sure how ;)
do you know how to reset?
Hello, I'm Marcelo and I'm from Angola and I have a Samsung eco bubble 7kg machine with a HE error, how do I solve it
My so Samsungn washing machines win.
Spinning the display board goes off and the machine freezes.
When I turn on the test mode it says tE4.
@@AskSamS3936 yes
Thank you . This was brilliant and great help
Peace, it is possible to malfunction the Samsung machine b2 error
How about dyer same
Thank you very much, super!!
Hi, i have the same washing machine and just when it starts the process you can hear the pump and then it's start to do a high spin and appear an e3 code.
Please help.
Thanks in advance
Hi, I also have this problem. did you find the solution ??
The key indicator is flashing on my washing machine. What can it be
generally means your door is locked while in use - only early in the cycle you can press pause and open the small additional flap on the door if it has one
Thank You ...Live for ever ...
Jus wandering when you pull the soap dispenser out where the water goes that was going through the soap dispenser to the drum Does it goes between the drum and metal side panel and drop out on the floor or does it still goes inside the drum.
You are very good thank you ca march merci
My Samsung Ecobubble have a door lock error code replaced the door lock but still have the same problem can someone help me to figure it out
What model is it?
Sir, I used samsung 9kg digital inverter front load fully automatic machine, that machine working time came one problem, few moment working our machine after automatically paused, that time opening machine inside water, don't drying waste water, now 2 times change already main electrical board, then don't re solve it our problem,
Sir,
Please give me any remedy
Thanks 🌹
Mine keeps stopping in a wash circle, I have to turn it off and on to start it washing again 😡. Anyone help please. It’s driving me crazy
@Shv Beatrice had to buy a new machine. It was the program what had gone !
Hi , any idea what a 3e code is when running this test ?
Hi, I also have this problem. did you find the solution ??
@@tomimalina2003 yes, i did a speed test alone, stop and test the normal way and it was good.
Error 3E ??? Help 🙏🏻🙏🏻🙏🏻🙏🏻
Got mine sorted out...bless u
ممكن الفيديو باللغه العربيه
Can you make another video in arabic language please
Sorry cannot do not know Arabic
Doesn't turn this cycle and I can't select quick30
Thanks you save me !!
I have the same machine, but my drum wouldnt spin showing error code E3. I guess i have to take it apart and check the drivebelt :(
Have the same and have no idea what shoudl I do. Do you find a solution?
@@martynamatuszak2308 Yes i was able to repair my machine. I had to replace the carbon brushes. It still works, good luck!
Thanks you save me 👍👍👍👍
Magyarul lègyszi forditás?
Merci beaucoup ✊😜😜😜
The hot water keep running
Tell me about error 3E
Thank you!!!!!
What about if the water can't come out please
Normally if the water cannot come out it us a blockage
Very helpful thanks for the video
Is this a washing machine or a fucking device to get you to the moon?! I wanne have my clothes clean, that's all Samsung friends.
I want to see where to put liquid detergent with the special thingy meant for liquid detergent. I have no idea how to use it.
How do I reset my samsung machine 7.0kg the previous engineer done this (ccc)
Thanks for information.
You are sepique franch ,???
Did this and it stopped & displaying UC
Merci beaucoup vraiment 👍👍👍
Hi..can you help me ?
Does this have direct drive motor?
No it has a motor and belt
Thank you very much
But the door stay locked
Wtf
Merci beaucoup 💘
Error 0E Overcharging please help!
This can be a few things including not draining that could be a blocked pump or kinked pipe
@@user-tim100 No problem with the water drain.
I think he has poured less water into the drum so far
Could the sensor be faulty?
Good man 😁👍
Besoin d'aide pour l'erreur 4