How To Install An M.2 MSATA SSD In A Laptop - Kingston SUV500 vs HDD Speed Comparison - Stone NT310

Поделиться
HTML-код
  • Опубликовано: 2 ноя 2024

Комментарии • 6

  • @paulkowal9545
    @paulkowal9545 3 года назад

    What is your overall opinion on this laptop? I want to use one for light gaming, is it good enough? I really enjoy your videos and your expertise, I just subbed.

    • @NathanPH
      @NathanPH  3 года назад +1

      Hi, Thanks for the sub!
      It's a pretty good all round laptop, especially if you put an SSD in it and have the i5 processor. Quite thin and light, the hinges can feed a bit flimsy but they are adequate I would say.
      Regarding gaming that would entirely depend on what kind of games you are looking to play on it. Bear in mind that it does not have a dedicated graphics card - only the integrated Intel graphics from the processor.
      You would have to check the system requirements for any games you wanted to run, It should handle Minecraft, some light MMOs and older titles, etc.. fine though.
      Hope this is somewhat helpful!
      --Nathan

  • @abrarsgaming6196
    @abrarsgaming6196 3 года назад

    i have the same laptop ass you have but its name is iiyama notebook W550SU1
    it has built in intel i5 4210m
    can you plz tell me how can i open cup fan wing on this laptop

  • @cobaltyt4215
    @cobaltyt4215 3 года назад

    Are you able to do a tutorial for upgrading the RAM in the laptop?

    • @NathanPH
      @NathanPH  3 года назад

      Hey, I can't at the moment unfortunately as my niece now has this laptop. It was to be a Christmas present for her so I did all the upgrade videos last year before handing it over. However if you simply remove the bottom cover as I do in this video, you can see the RAM modules. All you do to release them is push the clips on either side out slightly, simultaneously, and the memory module should lift/spring/pop up slightly allowing you to slide it out. The process for reinstalling new RAM in its place is to slot the modules back in like the others came out, and gently apply pressure and push them back down into the spring/clip latches.
      Hope this is somewhat helpful! --Nathan.

    • @cobaltyt4215
      @cobaltyt4215 3 года назад

      @@NathanPH Thanks