Products that we use and recommend: ► Replacement Thermostat: amzn.to/3C6dA0t ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
Greeting from Costa Rica. Quick question. I have Elantra 2013. AT 1.8cc . I need to check if I should put the thermostat at 82 c or 88c (temperature opening). Your video shows an 88c thermostat. thank you
Just a thought my Elantra 2000 manual transmission has a thermostat malfunction, stuck closed, can I drive my vehicle without a thermostat until I get a replacement.?
I noticed my coolant level was very low after my radiator light came while waiting at a red light. Light went off as soon as I started moving. At the same time I noticed my AC not blowing cold anymore. Can a bad thermostat effect all this or maybe it was the lack of coolant?
also same location for Hyundai Veloster 2012 . thanks for the video .. so now i have water leak in the same place ?! should i replace the thermostat or tight the bolt more .. or put some silicon ?
What is the trick to keep the thermostat in without falling out while putting the thermostat housing back on? It tends to fall out of alignment during the reinstall. I ensure placement with the notch correctly but it keeps falling out of alignment when putting the housing cover on.
Meaning/ if you wanna replace the thermostat no need to remove the intake manifold only alternator in order to replace thermostat / I want a comment from you, excuse me, is it correct or not
Products that we use and recommend:
► Replacement Thermostat: amzn.to/3C6dA0t
► Panel Removal Set: amzn.to/3YiMADu
► Assorted Fuses: amzn.to/4fx4s3F
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
I have questions can I replace the thermostat if I remove the alternator/ reply my answer please ok
Where located the Hyundai Elantra 2014 oil cooler?
But You can replace the thermostat if you remove the alternator correct or no
Greeting from Costa Rica. Quick question. I have Elantra 2013. AT 1.8cc . I need to check if I should put the thermostat at 82 c or 88c (temperature opening). Your video shows an 88c thermostat. thank you
Just a thought my Elantra 2000 manual transmission has a thermostat malfunction, stuck closed, can I drive my vehicle without a thermostat until I get a replacement.?
I have engine overheating problem in hyundai elantra new head gas kit installed radiator cleaned but still overheating can anyone help me
Thanks for the video. Do you have the torque specs of the thermostat housing?
Can you install thermostat without removing the antifreeze?
Much of it will come out that you'd have to replace anyway, so it's better to just empty and change it when you do the work.
I noticed my coolant level was very low after my radiator light came while waiting at a red light. Light went off as soon as I started moving.
At the same time I noticed my AC not blowing cold anymore.
Can a bad thermostat effect all this or maybe it was the lack of coolant?
على راسي والله اخوكم من العراق
Very helpful. Thank you!
Do you know where i can get parts for an i30 1.6 petrol?
also same location for Hyundai Veloster 2012 . thanks for the video .. so now i have water leak in the same place ?! should i replace the thermostat or tight the bolt more .. or put some silicon ?
What is the trick to keep the thermostat in without falling out while putting the thermostat housing back on? It tends to fall out of alignment during the reinstall. I ensure placement with the notch correctly but it keeps falling out of alignment when putting the housing cover on.
Hi bro.. How many o2 sensors on hyundai Tucson 2011 petrol suv and any different each others.. Thanks
it would be helpful to see this without anything removed
Just subscribed, thanks for sharing.
Exelente trabajo
excelente video
Meaning/ if you wanna replace the thermostat no need to remove the intake manifold only alternator in order to replace thermostat / I want a comment from you, excuse me, is it correct or not
Yup correct
You can me send front light ?
Just replaced it, and didn't have to remove the alternator. There is two nuts that need to be removed with a 10 mm
How did you get to it?
Thank you guys
forgot too mention putting breathing hole on thermostat towards the top!
nice man keep going
Thank you for agood video
I hear you put how the coolant is decomposed for Hyundai