More detail in the build article: ibuildit.ca/projects/making-the-power-wedge-bar-clamp/ Plans for this project: ibuildit.ca/plans/power-wedge-bar-clamp/
@@JohnHeisz no worries, I read the article all the way through anyway, thinking it was going to be a section at the end. Both projects turned out fantastic.
You're channel is partly responsible for my getting into woodworking. Watching you create so many interesting things inspired me to get into the creative side of construction. I grew up in a construction family and my first job at 5 was going around behind my uncles and grandfather and cleaning up the jobsite during the summer. By age 10 I was taking measurements and installing siding and windows. By age 16, I was finally able to bid, sell and complete my own jobs when not busy with school. Then I enlisted after 9/11, leaving behind my own business at age 19. I have since worked various jobs, mostly in security. But I missed working construction, even though I was no longer physically capable of doing the work(I hurt my back badly while serving). When I came across your channel, for the first couple of years I just enjoyed watching your projects. Slowly, I started finding other channels, many through your recommendations, and gained more and more interest in woodworking. I had experience with the tools used, but had sold almost all of my tools except my first circular saw and a few hand tools. So I started out with my first project of building a work bench, then a jig to use my circular saw as a makeshift table saw, then building cutting boards for family gifts. Then I started aquiring more tools. Now, I'm considering starting my own business again. This time, instead of building room additions or remodeling, I will be building cabinets and furniture and some trim carpentry. But if I had not first found your channel, which lead me back down the rabbit hole, I'd probably be sitting behind a desk somewhere, fighting against sleep while watching security cameras and wishing I had something to do besides watch RUclips on my phone. Thank you for sharing what you do. It means a lot to people like me.
@@edward-x3s6f it's okay with me. He can't possibly have time to read every comment on every video he posts. I didn't post this comment to get his attention, but to let him know that I pay attention to his work.
@@averagejoe4837 you get a heart from me mate, and I'm English/Australian. thanks for being so honest about yourself. As a Johny Foreigner, I can say that a lot of people don't get what 9/11 meant to Americans. I mean, in the "deeper" sense. And now you are Creating and not the opposite. Well done man. Sincerely, W.
I so love how you anticipate the trolls. You also make a very good point about what we do with the things we make, and how rewarding it is to use tools that we've made for ourselves. I just recently finished my second fence build(bought the plans twice~to show support), this time for my contractors saw(which i built from a rigid that had a super shitty fence system)and i can not tell people just how much enjoyment i get from using these things. Earlier this year i had one inspector admire my set up, one. That one was so worth it. Thanks John.
Bought the $5 plans and made one over the weekend from scrap oak, pallet wood. Looks great, works great and I had a blast making it. I will be making several more. There is just something special about being able to tell people when they ask where I got it; "I made that."
Over time you've come up with a wide range of various clamps and all of them in my opinion were great ideas as well as practical in the application. You're creative abilities never cease to amaze me. Good Job John.
I have a great deal of admiration for this channel in that John has made some wonderous things out of wood. In watching some of these videos however, it begs the question: at what point does it make sense to move on to metal working and fabricating things out of brass, aluminum, and tool steel? Before you say price, understand that this is a hobby and a passion for most of us. We are all shelling out a great deal of time and money amassing the equipment and know-how to build our projects, it isn't just the cost of the raw materials.
I love how you verbally present this. This calm, professional style should bring you more subscribers and keep them too. Your video work is very good as well.
John, I first started watching your videos several years ago, after watching Matthias. At first I thought your projects and videos were inferior to Matthias (such as testing the long reach clamps), but now your projects and videos are much better. I look forward to each of your releases, like your sense of humor, and find the projects very interesting and well thought out. I noticed the zero clearance insert on your miter saw and was wondering if you made a video for it. Very seldom post, but figured I owed you a statement of thanks for producing great videos. Keep up the good work.
@@mikejohnson7181 I misread your question. Fortunately, John's website is a fountain of useful information. Here's the link to the one on the miter saw: ibuildit.ca/projects/miter-saw-zero-clearance-insert/
Another great project, John. I appreciated the "product placement" of the belt/disk sander - a reminder to me to finish that project and, I am nearly there, I am happy to say. I was greatly anticipating the arrival of this video and I must say that you did not disappoint! I like the idea that this clamp is something to work on just for the joy of creating something really nice to have for years. Thanks!
You mean the mini sled? It works well in one, but the plastic top on this saw is very slick, so it's almost like it's on a ball bearing drawer slide. But yes, I think it may be time to build a new one :)
These are really awesome clamps. Since you can slide of the the moving jaw so easily, you only really need about 10 moving jaws. You can then make as many different lengths of bars you want, and since they are slimmer and more low-profile than the ones with notches, they take up less storage space. They are great looking too!
Yet another of your engineering and design marvels. Your entire workshop is a good testimony of this, homemade tools and furniture everywhere, and to me that definitely underlines the huge talent that you have for designing, engineering, and then also making great looking and very functional things. It is so motivating and inspiring (even if you do occasionally, on your other channel, come across a bit like Statler, from Statler and Waldorf, of the Muppet Show 😂)
Nicely done John! You should patent that design allowing for different size clamps as well. Perfectly adaquate for any clamping job that a woodworker would need. If you need more clamping power than that, then you are probably doing something wrong!
I've watched John long enough to assume what he shows us has been well thought-out, and I expect it's exactly as you suggest, he's minimizing the radius at the bottom of the cut. He could have done this on the band saw and had no radius, but then he'd need to set up a fence. I appreciate the "good enough" approach though - why put in extra effort for no benefit?
Recently, I was wondering whether to buy or make a clamp, but I will try to make it with reference to this video. It was very helpful. I'm just starting DIY and I'm a beginner, but please register if you like. I'll bother you again! (^^)!
Very cool. What is the longest you could see making these? Say, to glue up cutting boards or tabletops that might be 12"? or 24"? or 36"? I guess at some point if they got longer you would "beef up" the parts, maybe making the stationary parts 3/4"? I'm wondering if these could replace long bar clamps or long pipe clamps, or if they are really meant to be an alternative to the 12"-16" variety. Thanks.
Love it. I'm curious to see how this wedge idea could be used on a steel clamp, particularly one that I want to make from flat-bar - how it could loclk on the sides of flat-bar.
The best mechanism to lock onto a metal bar is the slotted plate that you see in the typical F clamp. However it's tricky to make the slot the right size where it actually works correctly.
Thanks John. Just ordered the plans and printed them. Download was easy. Looking forward to making them. Maybe I'm just uncoordinated but have always had trouble clamping small, light weight parts with heavy steel clamps. These should make that easier.
I loved the design. Great thing to give yourself. I imagine it using some exotic wood like we have here in Brazil like Angelin Pedra. I just think your fingers get too close of the blade. Be safe.
Had to wait two weeks for this video, but that's OK - I figured you were up North scoping out Matthias's camp with a view to fixing it up properly! (Another great video, by the way, thanks.
are you still planning to build a smaller bandsaw? I think I remember you saying that in another video. The smaller store bought ones I've had suk and I'm sure you could come up with one that actually works.
2 questions ... Is it possible to secure the t nut with epoxy or some super glue like tp 10. I always have bad luck with securing the t nuts, they end up failing and lifting out. Either the pilot hole for screw was too big or I used the wrong screw type or something. 2: what do you think about using a cnc, xcarve to cut the parts for the clamps?
You constantly amaze me with your ability to great tools with wood! I'm sure that you are an old soul reborn. Please continue to create and make your ancestors proud.
More detail in the build article:
ibuildit.ca/projects/making-the-power-wedge-bar-clamp/
Plans for this project:
ibuildit.ca/plans/power-wedge-bar-clamp/
Build article takes me to your subwoofer build.
@@LostWhits Thanks - fixed :)
@@JohnHeisz no worries, I read the article all the way through anyway, thinking it was going to be a section at the end. Both projects turned out fantastic.
!!!
÷
÷÷÷÷÷÷÷÷÷÷÷÷÷÷
÷
÷÷÷÷÷
÷
÷
÷÷÷÷
÷÷÷÷÷÷÷
÷
÷
÷÷
÷÷÷÷
÷÷÷÷
÷
÷
÷÷÷
÷÷
÷÷÷÷÷÷
÷÷÷÷
¿¿¿¿
¿¿
¿¿
¿¿¿¿÷÷÷÷÷
÷
÷÷
÷¿
µ
¿
¿
¿¿¿¿¿¿¿¿¿
¿¿¿¿¿¿¿¿¿¿¿÷÷÷÷÷÷÷÷÷
÷÷÷
.÷÷÷
÷
÷÷÷÷÷÷÷
¿
¿
¿
You're channel is partly responsible for my getting into woodworking. Watching you create so many interesting things inspired me to get into the creative side of construction. I grew up in a construction family and my first job at 5 was going around behind my uncles and grandfather and cleaning up the jobsite during the summer. By age 10 I was taking measurements and installing siding and windows. By age 16, I was finally able to bid, sell and complete my own jobs when not busy with school. Then I enlisted after 9/11, leaving behind my own business at age 19. I have since worked various jobs, mostly in security. But I missed working construction, even though I was no longer physically capable of doing the work(I hurt my back badly while serving).
When I came across your channel, for the first couple of years I just enjoyed watching your projects. Slowly, I started finding other channels, many through your recommendations, and gained more and more interest in woodworking. I had experience with the tools used, but had sold almost all of my tools except my first circular saw and a few hand tools. So I started out with my first project of building a work bench, then a jig to use my circular saw as a makeshift table saw, then building cutting boards for family gifts. Then I started aquiring more tools. Now, I'm considering starting my own business again. This time, instead of building room additions or remodeling, I will be building cabinets and furniture and some trim carpentry. But if I had not first found your channel, which lead me back down the rabbit hole, I'd probably be sitting behind a desk somewhere, fighting against sleep while watching security cameras and wishing I had something to do besides watch RUclips on my phone.
Thank you for sharing what you do. It means a lot to people like me.
Average Joe no heart form john😞
@@edward-x3s6f it's okay with me. He can't possibly have time to read every comment on every video he posts. I didn't post this comment to get his attention, but to let him know that I pay attention to his work.
@@averagejoe4837 you get a heart from me mate, and I'm English/Australian. thanks for being so honest about yourself. As a Johny Foreigner, I can say that a lot of people don't get what 9/11 meant to Americans. I mean, in the "deeper" sense. And now you are Creating and not the opposite. Well done man. Sincerely, W.
All of this craftsmanship and experience and you still use you’re instead of your
I so love how you anticipate the trolls. You also make a very good point about what we do with the things we make, and how rewarding it is to use tools that we've made for ourselves. I just recently finished my second fence build(bought the plans twice~to show support), this time for my contractors saw(which i built from a rigid that had a super shitty fence system)and i can not tell people just how much enjoyment i get from using these things. Earlier this year i had one inspector admire my set up, one. That one was so worth it. Thanks John.
Bought the $5 plans and made one over the weekend from scrap oak, pallet wood. Looks great, works great and I had a blast making it. I will be making several more. There is just something special about being able to tell people when they ask where I got it; "I made that."
Over time you've come up with a wide range of various clamps and all of them in my opinion were great ideas as well as practical in the application. You're creative abilities never cease to amaze me. Good Job John.
I have a great deal of admiration for this channel in that John has made some wonderous things out of wood. In watching some of these videos however, it begs the question: at what point does it make sense to move on to metal working and fabricating things out of brass, aluminum, and tool steel? Before you say price, understand that this is a hobby and a passion for most of us. We are all shelling out a great deal of time and money amassing the equipment and know-how to build our projects, it isn't just the cost of the raw materials.
I love how you verbally present this. This calm, professional style should bring you more subscribers and keep them too. Your video work is very good as well.
Never made any clamps before but I am now inspired to do so. Thanks John.
Great Video John! I have over 100 clamps with around 30 of them being parallel clamps, but after watching this I have the strange desire to make more
Sir I am Ur big fan and I am watching all vedios of u plz keep it up
God bless
John, I first started watching your videos several years ago, after watching Matthias. At first I thought your projects and videos were inferior to Matthias (such as testing the long reach clamps), but now your projects and videos are much better. I look forward to each of your releases, like your sense of humor, and find the projects very interesting and well thought out. I noticed the zero clearance insert on your miter saw and was wondering if you made a video for it. Very seldom post, but figured I owed you a statement of thanks for producing great videos. Keep up the good work.
Thank you :)
Regarding the zero clearance insert:
ibuildit.ca/projects/zero-clearance-table-saw-insert/
@@jodyburton0351 Thank you Jody, but I was hoping for a little more info. on the insert used at about the 4:50 mark for the sliding compound miter.
@@mikejohnson7181 I misread your question. Fortunately, John's website is a fountain of useful information. Here's the link to the one on the miter saw:
ibuildit.ca/projects/miter-saw-zero-clearance-insert/
Thanks John for another great tool. I probably won't make any because I'm lazy and I rather watch you.
Yet another cool clamp design. thanks John.
just bought the plans and will make within the next week. thanks John.
Thank you :)
Another great project, John. I appreciated the "product placement" of the belt/disk sander - a reminder to me to finish that project and, I am nearly there, I am happy to say. I was greatly anticipating the arrival of this video and I must say that you did not disappoint! I like the idea that this clamp is something to work on just for the joy of creating something really nice to have for years. Thanks!
You have done it again John........... Neat, practical bar clamp with clear and fairly simple instructions for us DIY'ers. Thank you. Anaco, Anz.
Thanks for the tips! Great outro music by the way I Love it.
Thank you John for doing these vidios. You are an inspiration to people like me
Good clamp design!
Great clamps John! I dont do much with wood, I am a metal guy, but love watching you make stuff!
رائع جدا ومحترف احييك من مصر الحضاره
Definitely going to make a couple or few of these, the wedge idea is a great one.
bravo ,beau travail john ,bonjour de la france.
At about 4:30, the entire top of my head lifted into the air and floated. Subscribed.
Thank you John, you are brilliant 👌🏻
thank you so much! i will make some like this
I love your speaking style, very easy to listen . About the sand paper, what kind is it exactly and does it wear out after use?
Nice work sir please keep it up
Are you going to do a clamping force/ break test?
I'd like to see this too.
I like the curve on the wedge that holds in place. Great design
You,Sir are one hell of a craftsman
Great Work John!!!!!!!!!!!!!!!!!
Nicely done John! 😃👍🏻👊🏻
Great video! As always
Actually, I might try making these. I’ve always wanted to try to make some of your wooden clamps !
Muy buen trabajo, y casi todas tus herramientas hechas de madera....enhorabuena, saludos desde Punta Umbría-Huelva-España.
Turned out great, as usual. I see @0:52 that you have another project ahead of you, or does it work fine with just one rail in the miter slot?
You mean the mini sled? It works well in one, but the plastic top on this saw is very slick, so it's almost like it's on a ball bearing drawer slide. But yes, I think it may be time to build a new one :)
esta muy buena la idea lo felicito muy bueno
These are really awesome clamps. Since you can slide of the the moving jaw so easily, you only really need about 10 moving jaws. You can then make as many different lengths of bars you want, and since they are slimmer and more low-profile than the ones with notches, they take up less storage space. They are great looking too!
Very good, amazing your wooden fastening clamps, you have won another registration and you are guaranteed.
Congratulations 👏👏👏👏
🇧🇷
Nice work, nice clamp, as usual...very nice John...MORE plans I MUST HAVE!
Great thanks for your videos
A greeting from Spain
Very ingenious clamps
I'll be making some of these. Just got the plans and wow! Excellent price for 14 pages of plans.
Great Work
Good Stuff! Thanks for sharing. You're very creative.
I like the finishing, it makes a good tool a nice tool.
Excellent!
Thank you :)
8:35 Lovely speech at the end!
Hey John those are some slick (stick ?) clamps! Nice job as ever, good video, thumbs up.
Beautiful work as always. And, I must say that I'm always amazed at how straight your grinder cuts are.
Great looking clamp John! Thanks for sharing the video with us.👌👍😎JP
Great looking design! Thanks John!
Yet another of your engineering and design marvels. Your entire workshop is a good testimony of this, homemade tools and furniture everywhere, and to me that definitely underlines the huge talent that you have for designing, engineering, and then also making great looking and very functional things. It is so motivating and inspiring (even if you do occasionally, on your other channel, come across a bit like Statler, from Statler and Waldorf, of the Muppet Show 😂)
I'm9nok
Thanks John. When I build mine. I will use a heavy weight. Incredible job!
Dear Sir, I tried to make this clamp with a guess to draw its diagram, and luckily I succeeded. ;D
Hello sir ..niceee yr idea....im impress 👍👍👍👍👍💜💞
John, can you explain the little attachment you use on your "normal clamps" at 4:11? Does that little wood block kind of simulate a parallel clamp?
It stops the clamp pads from leaving marks on soft woods.
Nicely done John! You should patent that design allowing for different size clamps as well. Perfectly adaquate for any clamping job that a woodworker would need. If you need more clamping power than that, then you are probably doing something wrong!
Another great design. Awesome.
Excellent build!
Wow Perfect Video 👌🏻 thx 👍🏻
Excellent work! Will it work if made from plywood?
Great video John, looks like it could be pretty useful around my shop.
could you use ply wood for these as well?
Really nicely made video! A pleasure to watch. Looking forward for more.
Awesome videos, love the ingenious ideas for around the shop. Definitely going to use some of these build for my shop !!
Why is the blade so high, 1:05, cutting such small pieces? Is it to keep the kerf radius depth shorter or is he just not paying attention.
I've watched John long enough to assume what he shows us has been well thought-out, and I expect it's exactly as you suggest, he's minimizing the radius at the bottom of the cut. He could have done this on the band saw and had no radius, but then he'd need to set up a fence. I appreciate the "good enough" approach though - why put in extra effort for no benefit?
Wow those are very cool
Recently, I was wondering whether to buy or make a clamp, but I will try to make it with reference to this video. It was very helpful. I'm just starting DIY and I'm a beginner, but please register if you like. I'll bother you again! (^^)!
Very good!
Thanks for the video.
Great design! Thank you!
These are wonderful.
Very cool. What is the longest you could see making these? Say, to glue up cutting boards or tabletops that might be 12"? or 24"? or 36"? I guess at some point if they got longer you would "beef up" the parts, maybe making the stationary parts 3/4"? I'm wondering if these could replace long bar clamps or long pipe clamps, or if they are really meant to be an alternative to the 12"-16" variety. Thanks.
Hello sir
you are perfect.
what kind of wood you use ?
Love it. I'm curious to see how this wedge idea could be used on a steel clamp, particularly one that I want to make from flat-bar - how it could loclk on the sides of flat-bar.
The best mechanism to lock onto a metal bar is the slotted plate that you see in the typical F clamp. However it's tricky to make the slot the right size where it actually works correctly.
These look really good, bought the plans, will hopefully get round to making some soon! Thanks
Nice project for sure.
Thanks John. Just ordered the plans and printed them. Download was easy. Looking forward to making them. Maybe I'm just uncoordinated but have always had trouble clamping small, light weight parts with heavy steel clamps. These should make that easier.
That message at the end though
I loved the design. Great thing to give yourself. I imagine it using some exotic wood like we have here in Brazil like Angelin Pedra. I just think your fingers get too close of the blade. Be safe.
Simply awesome
nice one mate, great video as always.
I can find 3, 4, and 6 prong T nuts, which would be best for these clamps ? Thanks
That's brilliant!
Thanks!
Love them....awesome clamps
Realy cool, I always love your video’s and craftmanship.
Love the table saw
What material is your table saw top and fence made out of?
Had to wait two weeks for this video, but that's OK - I figured you were up North scoping out Matthias's camp with a view to fixing it up properly! (Another great video, by the way, thanks.
Good job
Your engineers mind is at work again John 🤠👍🔨
Any tips for scaling these up to a bigger size? I assume the mechanism can be the same, but the bar would need to be beefier.
are you still planning to build a smaller bandsaw? I think I remember you saying that in another video. The smaller store bought ones I've had suk and I'm sure you could come up with one that actually works.
2 questions ... Is it possible to secure the t nut with epoxy or some super glue like tp 10. I always have bad luck with securing the t nuts, they end up failing and lifting out. Either the pilot hole for screw was too big or I used the wrong screw type or something. 2: what do you think about using a cnc, xcarve to cut the parts for the clamps?
You constantly amaze me with your ability to great tools with wood! I'm sure that you are an old soul reborn. Please continue to create and make your ancestors proud.
I really like this John! Well thought out design.
nice job. thanks
Very nice!
I like your video
These clamps really do look amazing, very clever idea!
How strong would they be compared to your other home-made clamps?
I'd say more than strong enough to do the job and then some. You don't need a shit ton of clamping pressure for woodworking.